Provision the Jabber or Dual Mode Device Service¶
Procedure¶
Choose Subscriber Management > Quick Add Subscriber. From the Username drop-down, select a user.
Select the Jabber/Dual-Mode Device check box. The Jabber and Dual-Mode Devices field appears.
Click + next to Jabber and Dual-Mode Devices to expose the Jabber/Dual Mode Agent drop-down and Device Name field.
Choose a device type from the Jabber/Dual Mode Agent drop-down. The Device Name field is automatically generated as follows:
If no device name exists in the format <device type prefix><username>, then in this format:
<device type prefix><username>
If device name exists in the format <device type prefix><username> or <device type prefix><username><number>, then in the format:
<device type prefix><username><random number>
where <random number> is generated and unique.
<device type prefix> - always three characters, either BOT, CSF, TAB, TCT, CIM, or CTI.
<username> - 8 characters maximum. If a username contains ‘_’ and ‘.’ characters, these characters are removed from the automatically generated username. Automatically generated usernames can be edited if required.
<random number> - dependent on length of username, to make up a total of 11 characters along with the username.
See examples in table below.
Example Device Type and Device Name Combinations
For this type of device
Device Name (automatically generated)
Format (regex): “[a-zA-Z0-9]{1,15}”
Android (Cisco Dual Mode for Android)
For example: BOTJOHND003938
CSF (Cisco Unified Client Services Framework)
For example: CSFROBWOR77891
iPad (Cisco Jabber for Tablet)
For example: TABRQUENT18947
iPhone (Cisco Dual Mode for iPhone)
For example: TCTPDEVILLI156
Carrier Integrated Mobile
For example: CIMJOHNSMI
CTI Remote Device
For example: CTIJOHNSMI
For the following Agents, also select the Mobile Identity check box to enable Mobile Identity if required:
Android
iPhone
Carrier Integrated Mobile
Click Save.
Choose Subscriber Management > Quick Add Subscriber. From the Username list, choose the same user.
Choose the Existing Services tab.
Make sure that the Phones field displays the Jabber device.
For each device type, a Configuration Template that is associated with the Subscriber’s Quick Add Group is used to provision the device. For defaults, see: Quick Add Subscriber Groups Default Model.
Note
If a CSF Jabber device type is selected, all lines are associated to the CSF Jabber device by default.