Local Break Out and Analog Gateway Events, IOS Commands, and Variables¶
Local Break Out and Analog Gateway Events
Default IOS Commands |
Notes |
|---|---|
HcsAddIOSDeviceEVT An IOS Device is added. |
|
conf t
voice service VoIP
no IP address trusted authenticate
y
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback
pass-through g711ulaw
modem passthrough nse codec g711ulaw
voice class codec 1
codec preference 1 g729r8 bytes 30
codec preference 2 g711ulaw
codec preference 3 g711alaw
end
|
If you are generating the command for VG350 analog gateway, remove y from the generated commands, and then paste it to the analog gateway console. |
Default IOS Commands |
|---|
HcsDeleteIOSDeviceEVT An IOS Device is deleted. |
conf t
no voice service VoIP
no voice class codec 1
end
|
Default IOS Commands |
Available Variables |
|---|---|
HcsAddAnalogGatewayEVT An Analog Gateway is added. |
|
conf t
stcapp ccm-group 1
stcapp
stcapp feature access-code
stcapp feature speed-dial
sccp local {{ pwf.GatewayDAT.networkInterface }}
sccp
bind interface {{ pwf.GatewayDAT.networkInterface }}
sccp ccm group 1
{{ macro.HcsAnalogGwCommandForCCMIdentAndAssocMCR }} ccm-manager
config server {{ fn.one macro.HcsCucmsAssociatedToNDLRMCR}}
ccm-manager sccp local {{ pwf.GatewayDAT.networkInterface }}
ccm-manager sccp
stcapp
end
|
pwf.GatewayDAT.networkInterface - This is the physical device network interface (Ethernet Port) for the analog gateway. |
Default IOS Commands |
Available Variables |
|---|---|
HcsAddAnalogGatewayEndpointEVT An Endpoint is added for the Analog Gateway. |
|
conf t
voice-port {{ pwf.PORT_NUM }}
caller-id enable
timeouts call-disconnect {{ fn.as_string
pwf.GatewayDAT.disconnectTimeout }}
cptone {{ pwf.GatewayDAT.cpTone }}
signal {{macro.HcsIosCmdAnalogGwSignalMCR}}
no shutdown
dial-peer voice {{ pwf.DIAL_PEER_NO }} pots
service stcapp
port {{ pwf.PORT_NUM }}
end
|
pwf.PORT_NUM - This is the FXS port number of the analog gateway device. pwf.GatewayDAT.disconnectTimeout - Time in seconds for which a connection is maintained after the completion of a communication exchange. pwf.GatewayDAT.cpTone - This is the call progress tone of the country that supports each analog device in the gateway. pwf.DIAL_PEER_NO - returns the dial peer number we use to generate dial peer. It starts from 4 for the first dial peer, and increase by 1 for the next one. |
Default IOS Commands |
Available Variables |
|---|---|
HcsAddAnalogGatewayEndpointModEVT An Endpoint Module is added for the Analog Gateway. |
|
conf t
voice-port {{ pwf.PORT_NUM }}
caller-id enable
timeouts call-disconnect {{ fn.as_string
pwf.GatewayDAT.disconnectTimeout }}
cptone {{ pwf.GatewayDAT.cpTone }}
signal {{macro.HcsIosCmdAnalogGwSignalMCR}}
no shutdown
dial-peer voice {{ pwf.DIAL_PEER_NO }} pots
service stcapp
port {{ pwf.PORT_NUM }}
end
|
pwf.PORT_NUM - This is the FXS port number of the analog gateway device. pwf.GatewayDAT.cpTone - This is the call progress tone of the country that supports each analog device in the gateway. pwf.GatewayDAT.disconnectTimeout - Time in seconds for which a connection is maintained after the completion of a communication exchange. pwf.DIAL_PEER_NO - returns the dial peer number we use to generate dial peer. It starts from 4 for the first dial peer, and increase by 1 for the next one. |
Default IOS Commands |
|---|
HcsDeleteAnalogGatewayEVT An Analog Gateway is deleted. |
conf t
no stcapp
no ccm-manager sccp local {{ input.GatewayDAT.networkInterface }}
no ccm-manager sccp
no sccp
no sccp local {{ input.GatewayDAT.networkInterface }}
no sccp ccm group 1
end
|
Default IOS Commands |
Available Variables |
|---|---|
HcsDeleteAnalogGatewayEndpointEVT An Analog Gateway Endpoint is deleted. |
|
conf t
voice-port {{ pwf.PORT_NUM }}
no caller-id enable
no timeouts call-disconnect
no cptone
no signal
shutdown
no dial-peer voice {{ pwf.DIAL_PEER_NO }} pots
no port {{ pwf.PORT_NUM }}
end
|
pwf.PORT_NUM - This is the FXS port number of the analog gateway device. pwf.DIAL_PEER_NO - returns the dial peer number we use to generate dial peer. It starts from 4 for the first dial peer, and increase by 1 for the next one. |
Default IOS Commands |
Available Variables |
|---|---|
HcsDeleteAnalogGatewayEndpointModEVT An Analog Gateway Endpoint Module is deleted. |
|
conf t
voice-port {{ pwf.PORT_NUM }}
no caller-id enable
no timeouts call-disconnect
no cptone
no signal
shutdown
no dial-peer voice {{ pwf.DIAL_PEER_NO }} pots
no port {{ pwf.PORT_NUM }}
end
|
pwf.PORT_NUM - This is the FXS port number of the analog gateway device. pwf.DIAL_PEER_NO - returns the dial peer number we use to generate dial peer. It starts from 4 for the first dial peer, and increase by 1 for the next one. |