Configure Device Pools

Overview

Device pools define sets of common characteristics for devices. The device pool structure supports the separation of user and location information. The device pool contains system, device, and location-related information.

After adding a new device pool, you can use it to configure devices, such as Cisco Unified IP Phones, gateways, conference bridges, transcoders, media termination points, voice-mail ports, and CTI route points.

Add, Edit, or Delete a Device Pool

  1. Log in to the Admin Portal as Provider, Reseller, or Customer administrator.

  2. If you’re logged in as:

    • Provider or Reseller administrator: Go to (default menus) Apps Management > CUCM > Device Pools.

    • Customer administrator: Go to (default menus) Apps Management > Advanced > CUCM > Device Pools.

  3. Choose an option:

    To add a new device pool

    • Click Add.

    • Choose the network device list (NDL) where you want to add the new device pool.

      Note

      You won’t need to choose a NDL if you’re adding the device pool at a site. In this case, you will use the NDL associated with the site.

    • Click OK.

    • On the Device Pool Settings tab, at Device Pool Name, fill out the device pool name as RSMSimPhone_DP.

    • From the Cisco Unified CM Group drop-down, choose RSMSimPhone.

    • On the Roaming Sensitive Settings tab, from the Date/Time Group drop-down, choose the appropriate date/time group.

    • From the Region drop-down, choose AR_ RSMSimPhone.

    • From the SRST Reference drop-down, choose Disable.

    To edit a device pool

    • Click on the relevant device pool in the list.

    • Go to step 4.

    To delete a device pool

    • In the list view, select the checkbox adjacent to the Name column for the device pool you want to remove.

    • Click Delete.

  4. To configure or update device pool properties, click through the tabs on the page and fill out at least the mandatory fields:

    • Device Pool Settings tab

    • Local Route Group Settings tab

    • Roaming Sensitive Settings tab

    • Device Mobility Related Information tab

    • Geolocation Configuration** tab

    • Incoming Calling Party Settings tab

    • Incoming Called Party Settings tab

    • Caller ID for Calls from This Phone tab

    • Connected Party Settings tab

    • Redirecting Party Settings tab

  5. Click Save. The route partition appears in the device pool list.

Device Pool Settings Tab

Option

Description

Device Pool Name *

Enter the name of the new device pool that you are creating. You can enter up to 50 characters, which include alphanumeric characters, periods (.), hyphens (-), underscores (_), and blank spaces.

Default value: None

Cisco Unified CM Group *

Choose the Cisco Unified Communications Manager group to assign to devices in this device pool. A Unified CM group specifies a prioritized list of up to three Unified CMs. The first Unified CM in the list serves as the primary one for that group. The other members of the group serve as backup Unified CMs for redundancy.

Calling Search Space for Auto-registration

Choose the calling search space to assign to devices in this device pool that auto-register with Unified CM. The calling search space specifies partitions that devices can search when attempting to complete a call.

Adjunct CSS

From the drop-down list, choose an existing Calling Search Space (CSS) to use for the devices in this device profile as an adjunct CSS for the Extension Mobility Cross Cluster (EMCC) feature. To configure a new CSS or modify an existing CSS, choose Call Routing > Class of Control > Calling Search Space in Unified CM Administration.

When configuring the EMCC feature, the administrator must configure a device pool for each remote cluster. If the remote cluster is located in a different country, the adjunct CSS must embrace the partition with which the emergency patterns of that country associate. This configuration facilitates country-specific emergency call routing.

Default value: None

Reverted Call Focus Priority

Choose a clusterwide priority setting for reverted calls that the hold reversion feature invokes. This setting specifies which call type, incoming calls or reverted calls, have priority for user actions, such as going off hook.

  • Default-If you choose this option, incoming calls have priority.

  • Highest-If you choose this option, reverted calls have priority.

The Not Selected setting specifies the reverted call focus priority setting for the default device pool at installation. At installation, incoming calls have priority. You cannot choose this setting in Unified CM.

Note: This setting applies specifically to hold reverted calls; it does not apply to parked reverted calls.

Intercompany Media Services Enrolled Group

Choose an Intercompany Media Services Enrolled Group from the drop-down list.

Local Route Group Settings Tab

Option

Description

Local Route Group

From the drop-down, choose the name of the local route group to associate with this device pool.

Route Group

From the drop-down, choose the value for the local route group to associate with this device pool.

Roaming Sensitive Settings Tab

Option

Description

Date/Time Group *

Choose the date/time group to assign to devices in this device pool. The date/time group specifies the time zone and the display formats for date and time.

Default value: None

Region *

Choose the Unified CM region to assign to devices in this device pool. The Unified CM region settings specify voice codec that can be used for calls within a region and between other regions.

Default value: None

Media Resource Group List

From the drop-down list, choose a media resource group list. A media resource group list specifies a prioritized list of media resource groups. An application selects the required media resource (for example, a music on hold server, transcoder, or conference bridge) from the available media resource groups according to the priority order defined in a media resource group list.

Default value: None

Location

Use locations to implement call admission control (CAC) in a centralized call-processing system. CAC enables you to regulate audio quality and video availability. It works by limiting the amount of bandwidth that is available for audio and video calls over links between locations. The location specifies the total bandwidth that is available for calls to and from this location.

From the drop-down list, choose the appropriate location for this device pool.

A location setting of None or Hub_None means that the locations feature does not track the bandwidth that the devices in this pool consume. A location setting of Phantom specifies a location that enables successful CAC across intercluster trunks that use H.323 protocol or SIP.

Default value: None

Network Locale

From the drop-down list, choose the locale that is associated with phones and gateways. The network locale contains a definition of the tones and cadences that the phones and gateways in the device pool in a specific geographic area use. Make sure that you select a network locale that all of the phones and gateways that use this device pool can support.

Note:

If the user does not choose a network locale, the locale that is specified in the Unified CM clusterwide parameters as Default Network Locale applies.

Note:

Choose only a network locale that is already installed and supported by the associated devices. The list contains all available network locales for this setting, but not all are necessarily installed. When a device is associated with a network locale that it does not support in the firmware, the device fails to come up.

Default value: None

Option

Description

SRST Reference *

From the drop-down list, choose a survivable remote site telephony (SRST) reference to assign to devices in this device pool. Choose from these options:

  • Disable - When you choose this option, devices in this device pool do not have SRST reference gateways that are available to them.

  • Use Default Gateway - When you choose this option, devices in this device pool use the default gateway for SRST.

  • Existing SRST references - When you choose an SRST reference from the drop-down list, devices in this device pool use this SRST reference gateway.

Default value: None

Connection Monitor Duration

This setting defines the time that the Cisco Unified IP Phone monitors its connection to Unified CM before it unregisters from SRST and reregisters to Unified CM.

To use the configuration for the enterprise parameter, you can enter “1” or leave the field blank. The default value for the enterprise parameter equals 120 seconds.

Tip:

When you change the value of the connection monitor duration, it applies only to the device pool that is being updated. All other device pools use the value in their own connection monitor duration fields or use the value that is configured in the enterprise parameter.

Single Button Barge

This setting determines whether the devices or phone users in this device pool have single-button access for barge and cBarge. From the drop-down list, choose from these options:

  • Off - When you choose this option, the devices in this device pool have the Single Button Barge/cBarge feature disabled.

  • Barge - When you choose this option, the devices in this device pool have the Single Button Barge feature enabled.

  • CBarge - When you choose this option, the devices in this device pool have the Single Button cBarge feature enabled.

  • Default - When you choose this option, the devices in this device pool use the service parameter setting for the Single Button Barge/cBarge feature.

Default value: Default

Join Access Lines

This setting determines whether the Join Access Lines feature is enabled for the devices or phone users in this device pool. From the drop-down list, choose from these options:

  • Off - When you choose this option, the devices in this device pool have the Join Access Lines feature disabled.

  • On - When you choose this option, the devices in this device pool have the Join Access Lines feature enabled.

  • Default - When you choose this option, the devices in this device pool use the service parameter setting for the Join Access Lines feature.

Default value: Default

Physical Location

Select the physical location for this device pool. The system uses physical location with the device mobility feature to identify the parameters that relate to a specific geographical location.

Default value: None

Option

Description

Device Mobility Group

Device mobility groups represent the highest level geographic entities in your network and are used to support the device mobility feature.

Default value: None

Wireless LAN Profile Group

Choose a wireless LAN profile group from the drop-down list.

Note:

You can specify the Wireless LAN Profile Group at the Device Pool level or the individual phone level.

Geolocation Configuration Tab

Option

Description

Geolocation

From the drop-down list, choose a geolocation.

You can choose the Unspecified geolocation, which designates that the devices in this device pool do not associate with a geolocation.

Default value: None

Geolocation Filter

From the drop-down list, choose a geolocation filter.

If you leave the <None> setting, no geolocation filter gets applied for the devices in this device pool.

Default value: None

Incoming Calling Party Settings Tab

Option

Description

National Prefix

Unified CM applies the prefix that you enter in this field to calling party numbers that use National for the Calling Party Numbering Type.

You can enter up to eight characters, which include digits, the international escape character (+), asterisk (*), or the pound sign (#). You can enter the word “Default” instead of entering a prefix. If the word “Default” displays in the Prefix field, Unified CM applies the service parameter configuration for the incoming calling party prefix, which supports both the prefix and strip digit functionality.

National Strip Digits

Enter the number of digits, up to the number 24, that you want Unified CM to strip from the calling party number of National type before it applies the prefixes.

National Calling Search Space

This setting allows you to globalize the calling party number of National calling party number type on the device. Make sure that the calling search space that you choose contains the calling party transformation pattern that you want to assign to this device. Before the call occurs, the device must apply the transformation by using digit analysis. If you configure the CSS as None, the transformation does not match and does not get applied. Make sure that you configure the calling party transformation pattern in a non-null partition that is not used for routing.

International Prefix

Unified CM applies the prefix that you enter in this field to calling party numbers that use International for the Calling Party Numbering Type. You can enter up to eight characters, which include digits, the international escape character (+), asterisk (*), or the pound sign (#). You can enter the word “Default” instead of entering a prefix. If the word “Default” displays in the Prefix field in the Device Pool Configuration window, Unified CM applies the service parameter configuration for the incoming calling party prefix, which supports both the prefix and strip digit functionality.

International Strip Digits

Enter the number of digits, up to the number 24, that you want Unified CM to strip from the calling party number of International type before it applies the prefixes.

International Calling Search Space

This setting allows you to globalize the calling party number of International calling party number type on the device. Make sure that the calling party transformation CSS that you choose contains the calling party transformation pattern that you want to assign to this device. Before the call occurs, the device must apply the transformation by using digit analysis. If you configure the CSS as None, the transformation does not match and does not get applied. Ensure that you configure the calling party transformation pattern in a non-null partition that is not used for routing.

Option

Description

Unknown Prefix

Unified CM applies the prefix that you enter in this field to calling party numbers that use Unknown for the Calling Party Numbering Type. You can enter up to eight characters, which include digits, the international escape character (+), asterisk (*), or the pound sign (#). If the word “Default” displays in the Prefix field in the Device Pool Configuration window, Unified CM applies the service parameter configuration for the incoming calling party prefix, which supports both the prefix and strip digit functionality.

Unknown Strip Digits

Enter the number of digits, up to the number 24, that you want Unified CM to strip from the calling party number of Unknown type before it applies the prefixes.

Unknown Calling Search Space

This setting allows you to globalize the calling party number of “Unknown” calling party number type on the device. Make sure that the calling party transformation CSS that you choose contains the calling party transformation pattern that you want to assign to this device. Before the call occurs, the device must apply the transformation by using digit analysis. If you configure the CSS as None, the transformation does not match and does not get applied. Ensure that you configure the calling party transformation pattern in a non-null partition that is not used for routing.

Subscriber Prefix

Unified CM applies the prefix that you enter in this field to calling party numbers that use Subscriber for the Calling Party Numbering Type. You can enter up to eight characters, which include digits, the international escape character (+), asterisk (*), or the pound sign (#). If the word “Default” displays in the Prefix field in the Device Pool Configuration window, Unified CM applies the service parameter configuration for the incoming calling party prefix, which supports both the prefix and strip digit functionality.

Subscriber Strip Digits

Enter the number of digits, up to the number 24, that you want Unified CM to strip from the calling party number of Subscriber type before it applies the prefixes.

Subscriber Calling Search Space

This setting allows you to globalize the calling party number of Subscriber calling party number type on the device. Make sure that the CSS that you choose contains the calling party transformation pattern that you want to assign to this device. Before the call occurs, the device must apply the transformation by using digit analysis. If you configure the CSS as None, the transformation does not match and does not get applied. Ensure that you configure the calling party transformation pattern in a non-null partition that is not used for routing.

Incoming Called Party Settings Tab

Option

Description

National Prefix

Unified CM applies the prefix that you enter in this field to calling party numbers that use National for the Called Party Numbering Type.

You can enter up to sixteen (16) characters, which include digits, the international escape character (+), asterisk (*), or the pound sign (#). You can enter the word “Default” instead of entering a prefix.

Tip:

If the word “Default” displays in the Gateway or Trunk Configuration window, you cannot configure the Strip Digits field in the Gateway or Trunk Configuration window. In this case, Unified CM takes the configuration for the Prefix and Strip Digits fields from the device pool that is applied to the device. If the word “Default” displays in the Prefix field in the Device Pool Configuration window, Unified CM applies the service parameter configuration for the incoming called party prefix, which supports both the prefix and strip digit functionality.

Tip:

To configure the Strip Digits field, leave the Prefix field blank or enter a valid configuration in the Prefix field. To configure the Strip Digits fields, do not enter the word “Default” in the Prefix field.

National Strip Digits

Enter the number of digits, that you want Unified CM to strip from the called party number of “Unknown” type before it applies the prefixes.

National Calling Search Space

This setting allows you to transform the called party number of “Unknown” called party number type on the device. If you choose None, no transformation occurs for the incoming called party number. Make sure that the calling search space that you choose contains the called party transformation pattern that you want to assign to this device.

International Prefix

Unified CM applies the prefix that you enter in this field to called party numbers that use National for the Called Party Numbering Type. You can enter up to 16 characters, which include digits, the international escape character (+), asterisk (*), or the pound sign (#). You can enter the word “Default” instead of entering a prefix.

Tip:

If the word “Default” displays in the Prefix field in the Gateway or Trunk Configuration window, you cannot configure the Strip Digits field in the Gateway or Trunk Configuration window. In this case, Unified CM takes the configuration for the Prefix and Strip Digits fields from the device pool that is applied to the device. If the word “Default” displays in the Prefix field in the Device Pool Configuration window, Unified CM applies the service parameter configuration for the incoming called party prefix, which supports both the prefix and strip digit functionality.

Tip:

To configure the Strip Digits field, leave the Prefix field blank or enter a valid configuration in the Prefix field. To configure the Strip Digits fields, do not enter the word “Default” in the Prefix field.

International Strip Digits

Enter the number of digits that you want Unified CM to strip from the called party number of International type before it applies the prefixes.

International Calling Search Space

This setting allows you to transform the called party number of International called party number type on the device. If you choose None, no transformation occurs for the incoming called party number. Make sure that the calling search space that you choose contains the called party transformation pattern that you want to assign to this device.

Option

Description

Unknown Prefix

Unified CM applies the prefix that you enter in this field to called numbers that use Unknown for the Called Party Numbering Type. You can enter up to sixteen characters, which include digits, the international escape character (+), asterisk (*), or the pound sign (#). You can enter the word “Default” instead of entering a prefix.

Tip:

If the word “Default” displays in the Prefix in the Gateway or Trunk window, you cannot configure the Strip Digits in the Gateway or Trunk Configuration window. In this case, Unified CM takes the configuration for the Prefix and Strip Digits fields from the device pool that is applied to the device. If the word “Default” displays in the Prefix field in the Device Pool Configuration window, Unified CM applies the service parameter configuration for the incoming called party prefix, which supports both the prefix and strip digit functionality.

Tip:

To configure the Strip Digits field, leave the Prefix field blank or enter a valid configuration in the Prefix field. To configure the Strip Digits fields, do not enter the word “Default” in the Prefix field.

Unknown Strip Digits

Enter the number of digits, that you want Unified CM to strip from the called party number of “Unknown” type before it applies the prefixes.

Unknown Calling Search Space

This setting allows you to transform the called party number of “Unknown” called party number type on the device. If you choose None no transformation occurs for the incoming called party number. Make sure that the calling search space that you choose contains the called party transformation pattern that you want to assign to this device.

Subscriber Prefix

Unified CM applies the prefix that you enter in this field to called numbers that use Subscriber for the Called Party Numbering Type. You can enter up to sixteen characters, which include digits, the international escape character (+), asterisk (*), or the pound sign (#). You can enter the word “Default” instead of entering a prefix.

Tip:

If the word “Default” displays in the Prefix field in the Gateway or Trunk Configuration window, you cannot configure the Strip Digits field in the Gateway or Trunk Configuration window. In this case, Unified CM takes the configuration for the Prefix and Strip Digits fields from the device pool that is applied to the device. If the word “Default” displays in the Prefix field in the Device Pool Configuration window, Unified CM applies the service parameter configuration for the incoming called party prefix, which supports both the prefix and strip digit functionality.

Tip:

To configure the Strip Digits field, leave the Prefix field blank or enter a valid configuration in the Prefix field. To configure the Strip Digits fields, do not enter the word “Default” in the Prefix field.

Subscriber Strip Digits

Enter the number of digits, that you want Unified CM to strip from the called party number of Subscriber type before it applies the prefixes.

Subscriber Calling Search Space

This setting allows you to transform the called party number of Subscriber called party number type on the device. If you choose None, no transformation occurs for the incoming called party number. Make sure that the calling search space that you choose contains the called party transformation pattern that you want to assign to this device.

Caller ID For Calls From This Phone Tab

Option

Description

Calling Party Transformation CSS

From the drop-down list, choose the CSS that contains the Calling Party Transformation Pattern that you want to apply to devices in this device pool.

When Unified CM receives a call from a device in this device pool on an inbound line, Unified CM immediately applies the calling party transformation patterns in this CSS to the digits in the calling party number before it routes the call. This setting allows you to apply digit transformations to the calling party number before Unified CM routes the call. For example, a transformation pattern can change a phone extension to appear as an E.164 number.

Connected Party Settings Tab

Option

Description

Connected Party Transformation CSS

This setting is applicable for inbound calls only. This setting allows you to transform the connected party number on the device to display the connected number in another format, such as a DID or E164 number. Unified CM includes the transformed number in the headers of various SIP messages, including 200 OK and mid-call update/reinvite messages for SIP calls and in the Connected Number Information Element of CONNECT and NOTIFY messages for H.323 and MGCP calls. Make sure that the Connected Party Transformation CSS that you choose contains the called party transformation pattern that you want to assign to this device pool.

Note:

If you configure the Connected Party Transformation CSS as None, the transformation does not match and does not get applied. Ensure that you configure the Calling Party Transformation pattern used for Connected Party Transformation in a non-null partition that is not used for routing.

Redirecting Party Settings Tab

Option

Description

Redirecting Party Transformation CSS

This setting allows you to transform the redirecting party number on the device to E164 format. Unified CM includes the transformed number in the diversion header of invite messages for SIP trunks and in the Redirecting Number Information Element of setup message (for H.323 and MGCP) sent out of Unified CM. Make sure that the Redirecting Party Transformation CSS that you choose contains the called party transformation pattern that you want to assign to this device pool. that the Connected Party Transformation CSS that you choose contains the called party transformation pattern that you want to assign to this device pool.

Note:

If you configure the Redirecting Party Transformation CSS as None, the transformation does not match and does not get applied. Ensure that you configure the Redirecting Party Transformation CSS in a non-null partition that is not used for routing.