On this page

Media Resources

VOSS Automate allows for the management of the following media resources in Unified CM:

  • Media Termination Point (MTP)

  • Transcoder

  • Conference Bridge

Note

  • Resources may be added at customer and site level

  • In a multi cluster environment, Unified CM selection can be carried out for each resource.

  • A media resource with a device pool and/or location are usually set up at site level. If however the media resource is created at customer level, consider the configuration of the device pool / location at customer level. The use of defaults available at CUCM level is possible, but a review of these settings may be required. Alternatively, creating a specific device pool / location for the media resource may be a better option.

Add a Media Termination Point (MTP)

VOSS Automate supports the following media termination point type: Cisco IOS Enhanced Software Media Termination Point

To add a MTP:

  1. Navigate to the required customer or site level.

  2. Select the Unified CM from the CUCM drop-down list.

  3. Enter a MTP Name

  4. Optionally complete the fields as required (refer to tooltips):

    • Description

    • Mtp Type - only one type supported: Cisco IOS Enhanced Software Media Termination Point. Display only.

    • Device Pool Name (refer to considerations at Media Resources.)

    • Trusted Relay Point

  5. Click Save and inspect the entry in the list view.

Note

The following cannot be modified: CUCM, MTP Name, MTP type

Delete a MTP

To delete a MTP, choose the MTP, and click the Delete button.

Add a Transcoder

To add a Transcoder:

  1. Navigate to the required customer or site level.

  2. Select the Unified CM from the CUCM drop-down list.

  3. The following transcoder types are supported in the Product drop-down list:

    • Cisco Media Termination Point Hardware

    • Cisco IOS Media Termination Point

    • Cisco IOS Enhanced Media Termination Point

  4. Enter a Transcoder Name

  5. Optionally complete the fields as required (refer to tooltips):

    The device pool should reflect the physical position of the hardware.

    • Description

    • Device Pool Name (refer to considerations at Media Resources.)

    • Is Trusted Relay Point

    • Common Device Config Name from Unified CM

    • Load Information

  6. Click Save and inspect the entry in the list view.

Note

The following cannot be modified: CUCM, product, transcoder name

Delete a Transcoder

To delete a transcoder, select it and click the Delete button.

Add a Conference Bridge

You can add, update, or delete a conference bridge.

To add a conference bridge:

  1. Navigate to the required customer or site level.

  2. Choose the Unified CM from the CUCM drop-down list.

  3. The following hardware types are supported in the Product drop-down list:

    • Cisco Conference Bridge Hardware

    • Cisco IOS Conference Bridge

    • Cisco IOS Enhanced Conference Bridge

  4. Enter a Conference Bridge Name

  5. Optionally complete the fields as required (refer to tooltips):

    The device pool and location should reflect the physical position of the hardware.

    • Description

    • Device Pool Name (refer to considerations at Media Resources.)

    • Location Name - as available on Unified CM

    • Security Profile Name - in accordance with the selected Product.

    • Common Device Config Name from Unified CM

    • Use Trusted relay Point

  6. Click Save and inspect the entry in the list view.

Note

When modifying a Conference Bridge, the following cannot be modified: CUCM, product, conference bridge name

Use the Delete button to delete a Conference Bridge.

previous

Call Park Management

next

Music on Hold (MOH) File Management