Associate a SIP Local Gateway to a Site

This procedure associates a SIP Local Gateway with a site.

Prerequisites:

  • The SIP Local Gateway and the target site must be in the same country.

  • The SIP Local Gateway and the target site must have the same CUCM Publisher.

  • The target site must have a site dial plan deployed.

Note

  • A SIP Local Gateway can be associated with multiple sites given the prerequisite conditions are met.

  • A site can be associated with multiple SIP Local Gateways given the prerequisite conditions are met.

  • If a SIP Local Gateway is deleted, all existing site associations are disassociated.

  • If a site is deleted through Site Management > Delete Site and at least "Remove Dial Plan Items" is selected, all SIP Local Gateway associations for that site are disassociated.

  • If a site dial plan is deleted, all SIP Local Gateway associations are disassociated.

Perform these steps:

  1. Log in as provider, reseller, or customer administrator.

  2. Set the hierarchy path to the site for which you want to associate a SIP Local Gateway.

    If you do not have the path set to a site, you are prompted to select the site.

  3. Choose Site Management > Associate SIP Local Gateway.

  4. Click Add.

  5. Select the SIP Local Gateway you want to associate with the site from the menu.

    Only SIP Local Gateways that have the same country and CUCM Publisher configuration as the site are available to be selected.

  6. Click Save.

    • The SIP Local Gateway appears in the Associate SIP Local Gateway list view.

    • The HcsSipLocalGwAddSitePstnEVT event is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event.

    • For each Area Code defined on the target site’s dial plan, the HcsSipLocalGwAddSiteAreaCodeEVT event is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event.

    • If the site has an existing E.164 to DN Association (N to N), either the HcsSipLocalGwAddE164AssociationEVT (for N to N) or the HcsSipLocalGwAddMultiE164AssociationEVT event (for N to 1) is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event.

    • If the site has an existing Voice Mail Pilot Number Association, the HcsSipLocalGwAddVoiceMailPilotNumberEVT event is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event.

    • If the Dial Plan Schema Group that is associated with the customer dial plan has the associateLboGateway custom workflow provisioned, the associateLboGateway custom workflow is executed.

    • The Site association to the SIP Local Gateway creates a Route Group with the SIP Trunk created and associated to the SIP Local Gateway.

previous

Dial Plan Roles and Privileges (provider deployment)

next

Disassociate a SIP Local Gateway from a Site