VoIP¶
This call type occurs when an endpoint located in a site wants to reach a destination on the PSTN through the Voice over IP (VoIP) provider. The cluster in which the site is located provides the source country dial plan and routing is based on the source country.
The call type includes:
SIP/SCCP signaling traffic for the endpoint between the endpoint and Cisco Unified Communications Manager
SIP signaling traffic is used for the SIP Gateway to the VoIP network and Cisco Unified Communications Manager
SIP Gateway to the VoIP network can be PRI as well
VoIP network can be connected through the Session Border Controller (not shown in the diagram)
Media traffic between the endpoint and SIP trunk SBC
Off-Net Call (VoIP)
Usage |
|
Accessibility |
Users can perform Off-Net call from any endpoint registered with Cisco Unified Communications Manager through the VoIP network if they subscribe |
Usage Example |
Billing consolidation between domestic and international outgoing calls |
Default Configuration |
|
Configuration Choices |
|
Redundancy |
Available to users without restrictions |
Survivability |
Not available to users in fallback mode |
Endpoint Types Supported |
|
Examples |
Case 1: Uses different PSTN Access Prefix and Trunk Transformation
CSS to convert DN to DDI
Phone A (DN=8 300 1234; External Mask=+14085289001)
Dial 0 12134225001
SIP2SIP GW Trunk {uses Called, Calling, Redirecting and Connected
Transformation CSS}
Outbound from CCM - CDPN = +12134225001; CGPN=+14085289001
Inbound Connected Number +12134225001
|