Associate or Disassociate SIP Local Gateway to a Site#

Provider deployments only.

Associate a SIP Local Gateway to a Site#

This procedure associates a SIP Local Gateway with a site.

Prerequisites:

  • The SIP Local Gateway and the target site must be in the same country.

  • The SIP Local Gateway and the target site must have the same CUCM Publisher.

  • The target site must have a site dial plan deployed.

Note

  • A SIP Local Gateway can be associated with multiple sites given the prerequisite conditions are met.

  • A site can be associated with multiple SIP Local Gateways given the prerequisite conditions are met.

  • If a SIP Local Gateway is deleted, all existing site associations are disassociated.

  • If a site is deleted through Site Management > Delete Site and at least "Remove Dial Plan Items" is selected, all SIP Local Gateway associations for that site are disassociated.

  • If a site dial plan is deleted, all SIP Local Gateway associations are disassociated.

Perform these steps:

  1. Log in as provider, reseller, or customer administrator.

  2. Set the hierarchy path to the site for which you want to associate a SIP Local Gateway.

    If you do not have the path set to a site, you are prompted to select the site.

  3. Choose Site Management > Associate SIP Local Gateway.

  4. Click Add.

  5. Select the SIP Local Gateway you want to associate with the site from the menu.

    Only SIP Local Gateways that have the same country and CUCM Publisher configuration as the site are available to be selected.

  6. Click Save.

    • The SIP Local Gateway appears in the Associate SIP Local Gateway list view.

    • The HcsSipLocalGwAddSitePstnEVT event is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event.

    • For each Area Code defined on the target site’s dial plan, the HcsSipLocalGwAddSiteAreaCodeEVT event is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event.

    • If the site has an existing E.164 to DN Association (N to N), either the HcsSipLocalGwAddE164AssociationEVT (for N to N) or the HcsSipLocalGwAddMultiE164AssociationEVT event (for N to 1) is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event.

    • If the site has an existing Voice Mail Pilot Number Association, the HcsSipLocalGwAddVoiceMailPilotNumberEVT event is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event.

    • If the Dial Plan Schema Group that is associated with the customer dial plan has the associateLboGateway custom workflow provisioned, the associateLboGateway custom workflow is executed.

    • The Site association to the SIP Local Gateway creates a Route Group with the SIP Trunk created and associated to the SIP Local Gateway.

Disassociate a SIP Local Gateway from a Site#

This procedure disassociates a SIP Local Gateway from a site.

Note

Prior to VOSS Automate, IOS commands generated at a site were lost when the site was deleted.

Perform these steps:

  1. Log in as provider, reseller, or customer administrator.

  2. Choose Site Management > Associate SIP Local Gateway.

  3. Select the check box next to the SIP Local Gateway you want to disassociate, then click Delete.

    • The SIP Local Gateway association is removed from the Associate SIP Local Gateway list view.

    • The HcsSipLocalGwDelSitePstnEVT event is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event.

    • For each Area Code defined on the site’s dial plan, the HcsSipLocalGwDelSiteAreaCodeEVT event is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event. If Area Codes are shared across multiple sites and associated with the same gateway, the commands are generated only when the gateway is disassociated from the last site that shares the Area Code.

    • If the site has an existing E.164 to DN Association, either the HcsSipLocalGwDelE164AssociationEVT (for N to N) or HcsSipLocalGwDelMultiE164AssociationEVT (for N to 1) event is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event.

    • If the site has an existing Voice Mail Pilot Number Association, the HcsSipLocalGwDelVoiceMailPilotNumberEVT event is generated. If enabled, the IOS Command Builder generates the default IOS commands associated with the event.

    • If the Dial Plan Schema Group that is associated with the customer dial plan has the unassociateLboGateway custom workflow provisioned, the unassociateLboGateway custom workflow is executed.

Note

When a SIP Local Gateway is disassociated from a site because the site is deleted, IOS commands are copied from the site to the customer level before the site is deleted. Select Device Management > IOS > Commands to view the copied IOS commands.