Local Gateway (LBO)#
This call type occurs in the following situations for an endpoint in a site that has Local Gateway (Local Breakout):
When the endpoint places a call to reach a destination in the PSTN through the Local Gateway
When the endpoint receives a call from the PSTN through the Local Gateway
The Local Gateway is used to connect to the PSTN locally. In this case, it must be possible on a per-call basis to select the Local Gateway breakout and there must be selectable per-site routing through the Local Gateway (that is, International, National, Service, and so on).
The call type includes:
SIP/SCCP signaling traffic for the endpoint between the endpoint and Cisco Unified Communications Manager
SIP signaling traffic for the Local Gateway between the Local Gateway and Cisco Unified Communications Manager
Media traffic between the endpoint and Local Gateway
Off-Net Call (Local Gateway)
Usage |
|
Accessibility |
User can perform Off-Net call from any endpoint registered with Cisco Unified Communications Manager |
Usage Example |
User can dial any PSTN number from their phone |
Default Configuration |
|
Configuration Choices |
|
Redundancy |
Available to users without restrictions |
Survivability |
Available to users in fallback mode, with the following restrictions:
|
Endpoint Types Supported |
|
Examples |
Case 1: Using Trunk Transformation CSS to convert DN to DDI
Phone A (DN=8 300 1234; External Mask=+14085289001)
Dial 9 12134225001
Local GW Trunk {uses Called, Calling, Redirecting and Connected
Transformation CSS}
Outbound from CCM - CDPN = +12134225001; CGPN=+14085289001
Inbound Connected Number +12134225001
|