Glossary¶
- Arbitrator¶
VOSS Insights Arbitrator is a log analytics platform that allows multiple data sources and log formats to be consumed, extracted, analyzed, and correlated, for complete event, alarm and systems monitoring.
sociated Associated phone. An associated phone is linked to a user. The phone’s linked user is then associated with the phone’s number.
to Attendant An automated (auto) attendant system that transfers telephone calls to the extension of a user or department without the intervention of a receptionist or operator. This is achieved via a system of voice menus that the person initiating the call interacts with via their telephone keypad or via voice commands. In some auto attendant systems, there are message-only information menus and voice menus that are used so that an organization can provide business information such as hours, directions to their premises, information about job opportunities, and answer other frequently-asked questions. After the message has played, the caller can be forwarded to the operator or they can return to the main menu.
number Called number. The number of the party receiving a call. See also A number.
K Unblocking
Country code
IS Common Channel Interoffice Signaling
R Call Data Records. Also, Call Detail Record
PB Communications Enabled Business Processes
Call forward
D Caller ID
sco36xx A Cisco 36xx Series Router
sco Emergency Responder Also known as CER, a server that ensures that the Cisco Unified Communications Manager (Unified CM) sends emergency calls to the appropriate Public Safety Answering Point (PSAP) for the caller’s location, and that the PSAP can identify the caller’s location and return the call if necessary. In addition, the system automatically tracks and updates equipment moves and changes.
sco Unified Presence Also known as CUP, a standards-based platform that collects information from multiple sources about user availability and communications capabilities to provide rich presence status and facilitate presence-enabled communications with Cisco Unified Communications and other critical business applications.
sco SRST Cisco Secure Survivable Remote Site Telephony, a disaster mitigation technology.
I Command-line interface. Also short for Caller ID (Caller Line Identification).
ID Caller ID / Caller Line ID
IP Calling Line Identification Presentation
IR Calling Line Identification Restriction
uster ID (CID) An ID assigned to each Cisco Unified Communications Manager PBX cluster in the system. This is configurable when adding the cluster and can be viewed on the cluster details page.
ntact Center A hardware and software solution that involves the intelligent routing of all contacts, call treatment, and general contact management over a multichannel IP infrastructure. Contact Centers often contain functionality to enable automatic call distribution functionality that interfaces with an organization’s unified communications solution.
S Short for Class of service. The term refers to a Calling Search Space (CSS) that is specifically used to define call routing and feature processing for a line or a phone.
SMOS Wire records
ID Call processing identifier (unique system-wide). First part of the FINT. The CPID and RID need to be unique within a provider. This is assigned to hardware as required (e.g. PBX, PGW, Voicemail, etc). The CPID is generally configurable when adding the hardware and is displayed when viewing the settings.
P Communications Service Provider
S Calling search space
Call type
I Computer telephony integration, also called computer-telephone integration or CTI, is technology that allows interactions on a telephone and a computer to be integrated or co-ordinated. As contact channels have expanded from voice to include email, web, and fax, the definition of CTI has expanded to include the integration of all customer contact channels (voice, email, web, fax, etc.) with computer systems.
CDM Cisco Unified Communications Domain Manager.
- Dashboard¶
VOSS Insights Dashboard server ships with standard, read-only templates called VOSS Reference Dashboards. The dashboards are configured to display data that provides you with statistics about your system. Customers can use the reference dashboards as shipped, or clone and edit the dashboards to create custom dashboards. Dashboards are based on search definitions that extract data from one or more fields. These may be predefined search definitions that ship with the default dashboards, or definitions that you set up to create custom views of the data to meet the needs of your organization.
al plan A dial plan establishes the expected number and pattern of digits for a telephone number, including country codes, access codes, area codes, extension numbers and all combinations of digits dialed. Dial plans must comply with the telephone networks to which they connect.
CO Direct Dial Central Office (Opposite of DID)
D Direct Distance Dialing
I Direct Dial Inward (same as DID).
CT Digital Enhanced Cordless Telecommunications
CP Dynamic Host Configuration Protocol. Used to perform basic configuration of computer systems, usually at boot time. May be used to set network parameters such as IP address, subnet mask and host name.
alplan Defines the number construction rules
D Direct Inward Dialing (US term for DDI).
S Digital Multiplex System
Short for Directory Number. This number can be assigned to a user and can be dialed. A DN may be composed of an extension prefix and/or a site location code and/or extension, but the DN is the final form of the internal dialable number. The DN is not the E.164 number, although they may coincide.
Inventory
Short for Directory Number Inventory. A list of directory numbers (DNs) configured in VOSS Automate that can then be used in a line configuration. The DN inventory resides only in VOSS Automate and is not pushed to Cisco Unified Communications Manager (CUCM, or CallManager). DNs may also be used as feature pilot numbers (for example, Hunt Pilot or Call Pickup patterns). When used as a service number, the DN is marked as unavailable and it cannot be used in a line configuration. DN inventory is configured at the Site or Customer hierarchy level. However, to configure DN inventory at a customer hierarchy, the customer dial plan must be configured not to use site location codes (“flat dial plan”).
IS Dialed Number Identification System
Short for Dial plan
rectory Number Routing DNR, or Directory Number Routing, allows an administrator to make their DN inventory inter- and intra-site routable by adding the necessary translation patterns on Cisco Unified Communications Manager (CUCM, or CallManager) when deploying a non-SLC-based dial plan. Normally, for the SLC-based dial plans, because each site requires a unique SLC, these translation patterns can automatically be deployed. This is not the case for non-SLC (flat) dial plans. In this case, DNR instances can be created when DN inventory is added to make these internally routable.
CODE Dial Peer Code
NSS Digital Private Network Signaling System.
L Digital Subscriber Line
MF Dual-tone multi-frequency. A method for instructing a telephone switching system of the telephone number to be dialed. This is done by sending pairs of tones down the line.
64 Also E.164. ITU-T recommendation defining PSTN numbering plan E164.
164 Associations E.164 Associations allow the customer’s DNs to be reachable from the PSTN network (DDI routing). The Administrator creates an E.164 (PSTN)-to-DN (internal extensions) association to provide the DDI mapping.
164 Inventory A list of E.164 (E164) numbers configured at a site hierarchy. This list only resides in VOSS Automate and is not pushed to Cisco Unified Communications Manager (CUCM, or CallManager).
164 Number The globally routable phone number that includes country code and country-specific format. This number is used for offnet Public Switched Telephone Network (PSTN) calls. E164 numbers must always be unique and the local PTT should ensure that the same number ranges are not given out twice.
Rs Event Data Records
SUP Extended ISDN User Part
IN Emergency Location Identification Number
L End of line. Variable used by the system to determine the end of line in each model.
T Extension and external prefix
TN Extension Final part of the FINT
M Frequency-division multiplexing
NT (fint) Full Internal Number, CPID + RID + SLC + EXTN = Cisco Unified CM DN. This is the full internal number the system knows the lines as. The construct of this is defined in the number construction rules. When a location is added, the full fint inventory is created for the location.
N The full national number (PSTN number). The E164 telephone number without area code
Gatekeeper
assfish Open Source Application Server
RS General Packet Radio Service
M Global system for mobile communications
I Graphical user interface
Gateway
323 ITU - T umbrella recommendation defining audio-visual protocols on a packet network H323 Protocol.
M-UCS
Hosted - Managed-Unified Communications Solution
sted UCS - HUCS This setting does not apply to Cisco HCS.Short form of Hosted Unified Communications Services. An abbreviation of M - HUCS.
I H323 Signaling Interface
CS This setting does not apply to Cisco HCS.Short form of Hosted Unified Communications Services - HUCS is a comprehensive, converged IP communications system of data, voice, video, and mobility applications, enabling more effective and secure personal communications that directly affect both sales and profitability.
nting Hunting or a hunt group is a telephony concept that refers to the concept of distributing phone calls from a single telephone number to several phone lines. A number of different hunt methods exist that can be configured depending on the organizations needs and requirements. The most common hunting methods include multi-line hunting, linear hunting, circular hunting and most-idle hunting.
nt Group See the term Hunting
PID Call processing identifier, IPPBX-based
DD International Direct Distance Dialing
le URL An Idle URL can be seen as a form of advanced screensaver. When a phone has been not received user input for a configurable amount of time (URL Idle Time Parameter), the system will perform a HTTP GET for the URL in the URL Idle field and will then display the contents of the URL on the phones screen. This content can be anything from an organizations logo to more advanced data such as a weather forecast or company updates.
EC Incumbent Local Exchange Carrier
Instant messaging
ACS IMACs stands for Installs, Moves, Adds and Changes. It covers the administration for: Installing new Customers, Locations, Users and Phones; moving Users and Phones; Adding Users and Phones and changing the Features and Services used for Users and Phones.
S Internetwork Operating System is an operating system from Cisco that is the primary control program used on Cisco Routers and devices. IOS is widely used and is robust system software that supports the common functions of all products under Cisco’s CiscoFusion architecture.
Internet Protocol
Addressing
IP Addressing should be unique, however, where two Customers have chosen the same private IP address ranges for their locations, NAT will be required to ensure that IP addresses within the system are unique.
T Internet Protocol Telephony (IP Telephony)
C The Cisco IP Solution Center (ISC). A security management solution from Cisco.
D International Subscriber Dialing
DN Integrated Services Digital Network
P Inter-site prefix
UP ISDN user part
U-T International Telecommunications Union - Developer of global info-communications standards
R Interactive voice response
ventory When a phone is initially entered into the system, it is added as an inventory item in the Service Providers warehouse. The Device Name and type are the only things known about this Phone. Over time, the phone will be allocated initially to a Reseller, who in turn will allocate it to a Customer. It is still an inventory item. It does not become a provisioned phone until it has been allocated to a Location.
PN Location Emergency Published Number
ne Appearance A line appearance is the assignment of a line to a phone. One line can have many line appearances. If a line has more than one line appearance, it is considered a shared line.
ne / Line Relation In the context of the Shared Lines Across Sites feature, the line or line relation is the line configured via (default menus) Subscriber Management > Lines, which is pushed to Cisco Unified Communications Manager (CUCM, or CallManager). A line is also pushed to Cisco Unified Communications Manager (CUCM, or CallManager) when it is referenced in a phone, extension mobility profile, or single number reach profile, and doesn’t already exists on the Cisco Unified Communications Manager. On Cisco Unified Communications Manager, a line corresponds with the items under menu Call Routing > Directory Number. It is also called a “line relation” because this is the technical term for the construct within VOSS Automate.
cation Name The Location name must be unique within a Customer. A naming convention is recommended, where a suffix is added to the location name that contains a reference to the Customer, for example, nsydney_cisco, Location names can be re-used within different Customers.
gged on Only a phone that has Extension Mobility Support can be logged onto by a user using a User Mobility profile. Once logged-on, the phone adopts the profile of the Mobile User and drops their registered number and profile.
ID Routing identifier, location-based
HUCS
Managed Hosted Unified Communications Service
C Address A Media Access Control address (MAC address), is a unique identifier assigned to network devices by their manufacturers. They are used for identification and in the Media Access Control protocol sub layer. MAC addresses are unique by their very nature.
F Main Distribution Frame
Multi-frequency
L Man-machine language
vius Movius is a leader in carrier-grade media servers, application servers and real-time multimedia applications for IP and TDM networks.
Multi-tenant
I Message waiting indicator
NP North American Numbering Plan - a dial plan based on 3-digit area codes and 7-digit telephone numbers used by 24 countries in North America and the Caribbean.
T Network Address Translation - A standard that enables a local area network (LAN) to use one set of IP addresses for internal network traffic and a second set of addresses for external traffic.
N Next Generation Network
A Nature Of Address
twise A Netwise CMG Telephony Server
P Network Time Protocol. Used to synchronize computer system clocks to a high degree of accuracy.
erbuild Overbuild is a VOSS Automate feature that allows you to integrate with a customer’s existing UC infrastructure.
S Online Charging System, a system allowing Communication Service Providers to charge their customers, in real time, based on service usage.
S Operations Support Systems
BX Private Automated Branch Exchange, often shortened to PBX.
T Port Address Translation. A form of network address translation whereby each IP Address on the LAN is translated to the same IP address but each with a different port.
C Padded Country Code
W Cisco Transit switch The Cisco PGW (Protocol Gateway) is a multi-protocol, carrier-grade soft-switch designed to support media gateway control functions and interworking in next-generation networks (NGNs).
one MAC Address See the MAC Address glossary entry for a full explanation of a MAC address. By their very nature, all Phone MAC addresses in the system are unique.
lot Number A pilot number is an address or location within a PBX or IP-PBX and is generally defined as a blank extension number or an extension that does not have a person or telephone associated with it. Without a defined pilot number, the PBX or IP-PBX cannot locate where the incoming call was received. Pilot Numbers are used in the system for a number of services such as Hunt Groups and Voicemail services.
BX Private Manual Branch Exchange
TS Plain Old Telephone Service
ovisioned Once a phone has been moved into a Location and into a specific subnet, the system allocates an IP address to the phones MAC address. If that phone is physically connected to the correct VLAN in the Location, then it will be automatically provisioned with the allocated IP address.
blic Holiday Public holidays are often referred to as Bank Holidays, National holidays, Federal Holidays and Vacations. Public Holidays are days that have been declared by a national, or sometimes local, authority to be non-working days. Public holidays are usually declared as an official observance of a religious, national, or culturally significant event. The impact on business is that businesses may be closed for business on days that would traditionally be trading days, for example Monday to Friday. Public holidays on days that are traditionally days of rest, tend to have a lesser impact on business.
TN Public Switched Telephone Network
T Push to Talk
S Quality of Service
IG Q Signaling (ISDN-based protocol for signaling between PBXs)
MAC Recent Change Memory Administration Center
gistered Only a provisioned phone can be registered. The registering process provides the phone with a telephone number and a configuration file. Only a registered phone can operate as a normal phone and can make and receive calls.
N Ringer Equivalency Number
I Return on Investment
uting ID (RID) This is configurable as to whether it is a customer level or location level ID. Although it is configurable, if anything other than Location is selected you will likely have problems. This ID is selected for a location and is unique for the CPID In the case of a location, the RID could be an available rid for the CPID of the IPPBX of the location.
CP Skinny Client Control Protocol
P Service Delivery Platform
rvice Activation The technical process of creating, delivering, and managing a service to or for a customer. It generally involves the configuration of multiple products (for example dial-tone, voice mail, conferencing, corporate directories and XML applications) for the one service.
Single Frequency supervision tone (2600)
P Session Initiation Protocol (SIP). A signaling protocol, widely used for setting up and tearing down multimedia communication sessions such as voice and video calls over the Internet.
te Code A location level code assigned for each location in the system. This is required if you wanted more than a single location in the system (as the fint needs to be unique). The site code inventory is managed per customer in the system. The length of the site code is always allowed to be variable with a defined maximum length. Overlapping site codes are not allowed within a customer - if a site code of 1 was defined, then a site code of 12 would not be allowed.
te defaults Site defaults allow you to provide default values that apply at site level for configuration required when onboarding customers, users, and subscribers.
C Site location code (unique within a customer). Penultimate part of the FINT.
C-based Dial Plan A site location code (SLC)-based dial plan is one that uses unique, site-specific dialable location codes that are embedded in the DN along with the extension. For example, the default Type 1 through Type 3 Cisco dial plans are SLC-based. Only the Type 4 dial plan is not SLC-based. Type 4 dial plan is commonly referred to as a “flat” dial plan because DNs are the actual extensions. In the context of the Shared Lines Across Sites feature, this distinction between types of dial plans is important because to support the Shared Line Across Sites, where devices at different sites can share a line that supports intra/intersite dialing from every site, an SLC would not allow a line to span multiple sites (because multiple sites can’t have the same SLC). The Shared Line Across Sites feature requires the customer to deploy a non-SLC based dial plan.
E Cisco Session Manager Edition, a transit switch used to aggregate multiple unified communications systems, referred to as leaf systems.
S Short Message Service. Also known as text messages.
AP Simple Object Access Protocol
Service Provider
Lock
Unlocking
7 Signaling System 7
D Subscriber Trunk Dialing
PI Telephony Application Programming Interface
O Total Cost of Ownership
CXR T carrier
chnician Server A server that is not managed by the system, but rather directly by a technician.
e system A term used in the documentation to refer to the application and its related hardware and software components.
D Time of Day
PS Traffic Service Position System
E Telephone Exchange Electronic
X Unit Automatic Exchange
SDP
Unified Communications Service Delivery Platform
aaS Unified Communication as a Services, for hosted and managed IP Telephony, offers a proven end-to-end integrated reference architecture for Unified Communications and IP telephony services, specifically targeting large, Enterprise and Service Provider deployments.
CM sco Unified CM ll Manager ified CM Cisco Unified Communications Manager
ified Mobility Cisco Unified Mobility
ified Presence Cisco Unified Presence
ity Cisco Unity is a powerful Unified Communications solution that provides advanced, convergence-based communication services such as voice and unified messaging on a platform that offers the utmost in reliability, scalability, and performance.
managedPBX Unmanaged PBXs are often used as parent components for a location.
er Name A unique name for a user across all customers. While Last Name and First name can be the same, User Name must be unique across all Customers. Hence, we recommend adding a domain suffix to user names, such as cmay_cisco_ns, where the suffix is an abbreviation for Cisco North Sydney location. Alternatively, the user name can be the same as the user phone number (DDI). This ensures that the user name is always unique.
Voicemail
IP Voice over Internet Protocol
TS Wide Area Telephone Service
AI Wireless Telephony Applications Interface
L Extensible Markup Language
Active Directory
P Business Admin Portal
T The file name extension for a batch file (.bat)
A phone template (BAT phone template)
The recommended device name prefix in VOSS Automate when provisioning phones with a fake MAC address
EY Business key
T Configuration Template
UD Short for Create Read Update Delete
V Short for Comma-separated Values
C Short for Cisco Unity Connection
CX Cisco Unified Contact Center Express. See also CCX or UCCX.
CC Short for Extension Mobility Cross Connect
C Short for Forced Authentication Code
PR Short for General Data Protection Regulation
MF Short for Hosted Collaboration Mediation Fulfillment
Hierarchy Node
P Identity Provider
P Interface Messaging Processor
I Internal Number Inventory
AP Lightweight Directory Access Protocol
C Message Authentication Code
H Music on Hold
S Multi Vendor Subscriber
L Network Device List
LR Network Device List Reference
I P-Asserted-Identity
T Phone Button Template
N Personal Identity Number
AR Private Line Automatic Ringdown
Partition
F Provisioning Workflow
G Quick Add Group
S Quick Add Subscriber
Quick Subscriber
P Remote Destination Protocol
Short for Remote Destination
Short for Route List
D Short for Site Defaults Doc
R Single Number Reach
O Short for Single Sign-on
C Service
S Transport Layer Security
Timezone
CX Cisco Unified Contact Center Express. See also CUCX or CCX.
I Uniform Resource Identifier
Agile Commit
surance A VOSS Insights solution. VOSS Insights Assurance provides business performance intelligence, allowing monitoring of UC apps with log analytics and customizable alerts, and comprises the the Dashboard and Arbitrator applications, with optional integrations for VOSS Automate, Avaya, and Windows Forwarder.
L Administration XML (AXL) interface supporting multiple AXL schema versions, which provide an abstraction layer between AXL Applications and the Unified CM database. Also, Cisco AVVID XML (AXL) server, a component of Cisco CallManager. The AXL server enables the Cisco EGW to identify and monitor individual end-user lines required for DPNSS supplementary services such as call back and extension status.
Business Commit
Business Unit
melot SIP call load generator used to make SIP calls. Used to create load for CUCM and UCxn.
CE Cisco Contact Center Express. Contact center solution, also known as Cisco Unified Contact Center Express (UCCX), designed for mid-market enterprise branch or corporate departments requiring a sophisticated customer interaction management solution for up to 300 agents.
M Cisco CallManager. Call process software, also known as Cisco Unified Communications Manager, or CUCM.
ME Cisco CallManager Express. Target at small market Key system replacement 256 line
ET Cisco Defect and Enhancement Tracking system for HCS.
L Cisco Enterprise Linux Cisco Testbeds
PM Cisco Enterprise Policy Manager, used for managing entitlement.
R Cisco Emergency Responder. Used for filling out information to route emergency calls.
D Customer Found Defect
A Change Impact Analysis
PC Cisco IP Communicator, a soft client (which looks like a phone) on PC for voice
SI Cisco Open Source Initiative
Change Request
L Software Development Lifecycle
F Client Service Framework
M Cisco Security Manager
AE Cisco Unified Application Environment, an application development environment for developers.
BE Cisco Unified Border Element. Cisco IOS Session Border Controller (SBC) that interconnects independent voice over IP (VoIP) and video over IP enterprise networks for data voice and video transport. CUBE is an integrated Cisco IOS Software application that runs on the Cisco 2900/3900 and 2800/3800 Series Integrated Services Routers (ISRs), the Cisco AS5350XM/AS5400XM universal gateways and the ASR 1002/1004/1006 routers.
C (CUCXM) Cisco Unity Connection. Voice mail system
CCE Cisco Unified Contact Center Enterprise. Call center management.
CCX Cisco Unified Contact Center Express
CI Cisco Unified Communications Integration. See also CUCIMOC.
CIMOC Cisco Unified Communications Integration for Microsoft Office Communicator. Requires Microsoft OCS & Office Comm AD; provides IM & Presence; Cisco CUCM provides call control click to dial phone status.
CMBE Cisco Unified Communications Manager Business Edition. VOIP PBX.
CMS Cisco Unified Communications Management Suite. Packaged services on CUCM
E Cisco Unity Express. Linux based, runs on ISR blade; voice mail
EA Cisco Unified Expert Advisor. Routes call to agents based on expertise
IS Cisco Unified Intelligence Suite
MA Cisco Unified Mobility Advantage. Mobile Client
Cisco Communications Manager Appliance. In a Network server and communicates to Smart Phone Client CUMC and SIP to UCM
MC Cisco Unified Mobile Communicator. Client in a smart phone for connection to CUMA - SIP to UCM
MP Cisco Unified Meeting Place (similar to WebEx).
nM Cisco netManager Unified Communications. Part of the UC management suite.
OM Cisco Unified Operations Manager. Part of the UC management suite.
P Cisco Unified Presence. Presence Server.
PC Cisco Unified Personal Communicator. UC PC soft client.
PM Provisioning Manager. Part of the UC management suite.
PS Short for Cisco Unified Presence Server. Provides Presence Status.
SM Cisco Unified Service Monitor. A service monitor.
SSM Cisco Unified Service Statistics Monitor. Service statistics.
VA Cisco Unified Video Advantage. Screen video with phone PC app
VC Cisco Unified Video Conferencing Video conferencing server bridge
P Cisco Voice Portal. Call center scripts.
E Early Customer Engagement
Emergency Release. The term used to describe an ES by VOSS.
P Field Display Policy. GUI rules that define how fields display and behave.
M-F Short for Hosted Collaboration Mediation Fulfilment
S Short for Hosted Collaboration Solution.
ST Hand Over System Test
AP IMAP load generator: Used to generate IMAP traffic for UCxn.
CBU IP Communications with a key focus on CUCM and IP phones.
CP Media Gateway Control Protocol
tFlow A VOSS Insights solution, comprising DS9 and Dashboard applications. Insights NetFlow provides the architecture to allow visualization and analysis of network traffic flow data.
ITE Solution Testing primarily used for verifying HCS as a solution and scale testing.
X Private branch exchange. Digital or analog telephone switchboard located on the subscriber premises and used to connect private and public telephone networks
W Packet Gateway. IP to TDM / PSTN networks
OC Cisco Proactive Network Operations Center
C Proof of Concept
D Product Requirements Definition
I Primary Rate Interface. ISDN interface to primary rate access
B Product Security Baseline
T Product Specification Tool
AC Role Based Access Control
MT UC application monitoring tool for viewing performance counters and alerts/alarms.
S Solution Architecture Specification
R Scale Based Regression. Performance related
TP Stream Controlled Transmission Protocol.
Pp Used to generate SIP traffic for CUP.
Session Manager.
TP Simple Mail Transfer Protocol. Internet protocol providing e-mail services
MP Simple Network Management Protocol. Network management protocol used in TCP/IP networks
ND Solution Reference Network Design
ST Survivable Remote Site Telephony. Limited call functionality when losing WAN connection
C Techincal Assistance Center
I Transfer of Information
Short for Unified Communications. Product suite.
BU UCNX (Voice Mail) CUP (Presence) Mobile Clients Soft Clients Servers for these
CE Unified Contact Center Enterprise. ACD Automatic call distribution
NX Unity Connection. Linux server-based unified messaging application.
S Unified Computing System. Cisco servers to replace HP.
ware VMware and its client software, used to manage virtual machines and UCS blade configuration. Also used to monitor performance statistics at the hardware level.
AT Voluntary Product Accessibility Template, a template to assess the accessibility compliance of a site.
Manager Tool used to monitor jitter in the network. Jitter monitoring is important to UCxn.
P Wireless Access Point / Wireless Application Protocol
S Wireless Control System
bEx A Cisco application for meetings, messaging, and events.
A Cisco Wireless Location Application
C Cisco Wireless LAN Controller