.. _add-self-provisioning-universal-line-template:

Add a self-provisioning universal line template
-----------------------------------------------

The Universal Line Template (ULT) is used before self-provisioning
actually takes place. ULTs are used to create directory numbers on Cisco
Unified Communications Manager (CUCM). A directory number is identified by a
pattern (the number portion) and a route partition. A directory number
also has various settings that can be configured for the line. When a
directory number is created using a ULT, the ULT determines the route
partition and the line settings.


.. tip:: 

   :ref:`use-action-search-to-navigate-automate`


1. Log in as provider, reseller, or customer administrator.
2. Set the hierarchy path to the site node where you want to configure
   self-provisioning.
3. Go to **Universal Line Template**.
4. Click **Add**.
5. Enter the following required Universal Line Template information.

.. tabularcolumns:: |p{5cm}|p{10cm}|

+--------------------+----------------------------------------------+
| Field              | Description                                  |
+====================+==============================================+
| Name               | The name of the universal line template      |
+--------------------+----------------------------------------------+
|                    | Use locations to implement call admission    |
|                    | control (CAC) in a centralized               |
|                    | call-processing system. CAC regulates audio  |
|                    | quality and video availability by limiting   |
| Location           | the amount of bandwidth for audio and video  |
|                    | calls over links between locations. The      |
|                    | location specifies the total bandwidth that  |
|                    | is available for calls to and from this      |
|                    | location.                                    |
+--------------------+----------------------------------------------+
| Partition          | Enter the route partition used to create     |
|                    | lines at the site.                           |
+--------------------+----------------------------------------------+
| Blf Presence Group | Enter the presence group applicable for busy |
|                    | lamp field buttons.                          |
+--------------------+----------------------------------------------+

6. Fill out additional optional settings, if applicable.
7. Click **Save**.