There are few scenarios that show the expected behaviour of an Analog gateway when adding, deleting, or modifying a gateway.

Analog Gateways

There are few scenarios that show the expected behaviour of an Analog gateway when adding, deleting, or modifying a gateway.

Model Details: relation/HcsAnalogGatewayREL

Successful Scenario	Failure Scenario
Adding an Analog device with a phone line.	Removing the phone line from the endpoint.
Adding an Analog gateway without using enable command builder.	Adding a phone line after adding the command builder.
Removing the command builder after adding an analog gateway with command builder.	Adding an analog gateway without a phone line after adding a phone line to an endpoint. Note: Ensure to add the Directory Names to both endpoints.

Field	Description
IOS Device *	Choose the required IOS Device from the drop-down list. For example: IOS 11. This is a mandatory field. Note: The IOS device identifies the devices that are not associated with any Analog Gateways.
Product *	Choose the product from the drop-down list. For example: VG202, where VG represents Voice Gateway and 202 represents port. It has 2 ports, 0 and 1. This is a mandatory field. Note: The analog gateway supports the following models (FXS ports): VG202: 2 ports VG204: 4 ports VG224: 24 ports VG310: 24 ports VG320: 48 ports VG350: 144/160 ports VG400: 8 ports max VG450: 144 ports max
Protocol *	Choose the protocol from the drop-down list. The available protocols are SCCP and MGCP. This is a mandatory field.
Gateway Name *	Enter the MAC address of the analog gateway. For example: SKIGW0102030405, where SKI represents SCCP, GW represents gateway, and the last 10 digits represents the MAC address of the gateway. This is a mandatory field for the SCCP protocol.
Domain Name	Enter a fully qualified domain name. For example: E7C1VG310.hcsent17.com. This is a mandatory field for the MGCP protocol.
Call Manager Group *	Choose the call manager group from the drop-down list. For example: Default. This is a mandatory field. Note: Call Manager Group is default based on the site default device pool.
Enable Command Builder	Leave the check box clear to generate IOS commands, when Analog Gateway is added, deleted, or modified.

Field	Description
Gateway Network Interface *	Enter a Gateway Network Interface. For example: FastEthernet0/0, FastEthernet0/1, GigabitEthernet0/0, GigabitEthernet0/1 or GigabitEthernet0/2. This is a mandatory field. Note: Check the network interface at the Physical Device, then choose the appropriate Network Interface and Port as applicable. The Network Interface is used in Command Generation. Choose FastEthernet for all 2x series and GigabitEthernet** for all 3x series.
Call Disconnect Timeout *	Enter the time unit for Call Disconnect Timeout. For example: 2. This is a mandatory field. Note: The time unit always is in seconds. Do not enter any negative timer values.
CP Tone *	Choose the call progress tone (country code) from the drop-down list. For example: in (for India). This is a mandatory field. Note: CP Tone is an FXS configuration parameter that supports each analog device in the gateway.
Signal *	Choose a signal from the drop-down list. For example: loop-start or ground-start. This is a mandatory field. Note: Signal is an FXS configuration parameter that supports each analog device in the gateway.

Field	Description
Slot *	Choose the required value from the drop-down list. For example: 0. This is a mandatory field Note: Add only those Units (Modules) and Subunits that are listed in the drop-down list, without duplicate the units and subunit numbers. If duplicating entry is made for a slot, then the new slot overwrites the older configuration. You may lose previously configured endpoints. For VG310 model, do not choose any module for slot 1.
Module *	Choose the available module from the drop-down list. For example: NM-4VWIC-MBRD. Note: Only modules that are available for the slot appear in the list.
Subunits *	Click + to expand Subunits. This is a mandatory field.
Subunit Position *	Choose the subunit position from the drop-down list. For example: 0. Note: Subunit position 1 on the VG310 gateway has no available hardware by design, so choosing a value of 1 in this drop-down will not allow you to continue. Please choose a different subunit position to continue setting up your gateway.
Subunit *	Choose the subunit from the drop-down list. For example: VIC3-2FXS-E/DID-SCCP.

Option	Description
Gateway Name	This read-only field is populated from the analog gateway for the SCCP protocol. This is a mandatory field.
Slot *	This read-only field is populated from the gateway units. This is a mandatory field.
Subunit Position *	This read-only field is populated from the gateway units. This is a mandatory field.
Port Number *	This read-only field is populated from the gateway units. This is a mandatory field.
Product Type *	Choose the product type from the drop-down ist. For example: Analog Phone. This is a mandatory field.
Device Protocol *	Choose the device protocol from the drop-down list. This is a mandatory field.
Device Name *	This read-only field is populated from the analog gateway. This is a mandatory field.
Description	When the endpoint is added, the default description is the Device Name that can be updated if required. This is an optional field and accepts a string value.
Device Pool *	Choose the device pool from the drop-down list. For example: Cu2Si2-DevicePool. This is a mandatory field.
Phone Button Template *	Choose the phone button template from the drop-down list. For example: Standard Analog. This has a specific phone button template for the analog gateway. This is a mandatory field.
Common Phone Profile *	Choose the common phone profile from the drop-down list. For example: Standard Common Phone Profile. It includes the attributes (services or features) that are associated with a particular user. This is a mandatory field.
Calling Search Space	From the drop-down list, choose the appropriate calling search space. The calling search space specifies a collection of partitions that are searched to determine how a collected (originating) number should be routed.
AAR Calling Search Space	Choose the appropriate calling search space for the device to use when it performs automated alternate routing (AAR). The AAR calling search space specifies the collection of route partitions that are searched to determine how to route a collected (originating) number that is otherwise blocked due to insufficient bandwidth.
Media Resource Group List	This list provides a prioritized grouping of media resource groups. An application chooses the required media resource, such as a Music On Hold server, from among the available media resources according to the priority order that a Media Resource Group List defines.
Location *	Choose a location from the drop-down list. For example: Cu2Si2-Location. This is a mandatory field.
AAR Group	Specify the automated alternate routing (AAR) group for this device. The AAR group provides the prefix digits that are used to route calls that are otherwise blocked due to insufficient bandwidth.
Owner	Choose from the drop-down list.

Field	Description
Always Use Prime Line for Voice Message *	Choose the required options from the drop-down list. For example: On, Off or Default. This is a mandatory field. This specifies whether the device will always use the prime line for voice messages.
Geolocation	From the drop-down list, choose a geolocation. You can choose the Unspecified geolocation, which designates that this device does not associate with a geolocation.
Transmit UTF-8 for Calling Party Name	Keep the check box clear.
Called Party Transformation CSS	This setting allows you to send transformed called party number in SETUP message for outgoing calls. Make sure that the Called Party Transformation CSS that you choose contains the called party transformation pattern that you want to assign to this device. Note: If the Called Party Transformation CSS is configured as <None>, the transformation does not match and does not get applied. Ensure that you configure the Called Party Transformation CSS in a non-null partition that is not used for routing.
Use Device Pool Called Party Transformation CSS	Select the check box.
Allow Control Of Device From CTI	Select the check box.
Logged Into Hunt Group	Select the check box.
Calling Party Transformation CSS (Caller ID For Calls From This Phone)	This setting allows you to send transformed calling party number in SETUP message for outgoing calls. Also when redirection occurs for outbound calls, this CSS will be used to transform the connected number sent from Cisco Unified Communications Manager side in outgoing NOTIFY messages. Make sure that the Calling Party Transformation CSS that you choose contains the calling party transformation pattern that you want to assign to this device. Note: If the Calling Party Transformation CSS is configured as <None>, the transformation does not match and does not get applied. Ensure that you configure the Calling Party Transformation Pattern in a non-null partition that is not used for routing.
Use Device Pool Calling Party Transformation CSS (Caller ID for Calls From This Phone)	Select the check box.
Calling Party Transformation CSS (Device Mobility Related Information)
Use Device Pool Calling Party Transformation CSS (Device Mobility Related Information)	Select the check box.
BLF Presence Group *	Choose the presence group for busy lamp field buttons from the drop-down list. For example: Standard Presence group is the default value. This is a mandatory field.

Field	Description
Device Security Profile *	Choose options from the drop-down list. For example: Analog Phone - Standard SCCP Non-Secure Profile. This is mandatory field.
MLPP Domain	If you leave the value <None>, this device inherits its MLPP domain from the value that was set for the device pool of this device. If the device pool does not have an MLPP Domain setting, this device inherits its MLPP domain from the value that was set for the MLPP Domain Identifier enterprise parameter.
MLPP Indication	Choose options from the drop-down list. For example: On, Off, or Default. This is a mandatory field.
MLPP Preemption	Choose options from the drop-down list. For example: Disabled, Forceful, or Default. This is a mandatory field. Note: If there are any changes to be performed to analog phone line then do not refer line settings. For example: Changing CSS is done under Subscriber Management.
Line	Click + to expand Line.
Pattern *	Choose the route pattern from the drop-down list. For example: 08231006
Enduser	Click + to expand Enduser.
User ID	Choose the available user ID from the drop-down list. For example: Subscriber 1
Product Specific Configuration Layout	Click + to expand Product Specific Configuration Layout.
Key	Enter the Key for the product specific configuration layout. For example: stcappRegCap.
Value	Enter the Value for the product specific configuration layout. For example: 0.

Option	Description
Domain Name	This read-only field is populated from the analog gateway for the MGCP protocol. This is a mandatory field.
Slot *	This read-only field is populated from the gateway units. This is a mandatory field.
Subunit Position *	This read-only field is populated from the gateway units. This is a mandatory field.
Port Number *	This read-only field is populated from the gateway units. This is a mandatory field.
Product Type *	Choose the product type from the drop down list. For example: Analog Phone. This is a mandatory field.
Device Protocol *	Choose the device protocol from the drop-down list. For example: SCCP. This is a mandatory field.
Protocol Side *	This is a read-only field except when creating a device. This is a mandatory field.
Class *	This is a read-only field except when creating a device. This is a mandatory field.
Device Name *	This read-only field is populated from the analog gateway. This is a mandatory field.
Description	When the endpoint is added, the default description is in the format: Endpoint for slot/subunit/port n/n/n gateway @domain that can be updated if required. This is an optional field and accepts a string value.
Device Pool	Choose the device pool from the drop-down list. For example: Cu2Si2-DevicePool. This is a mandatory field.
Calling Search Space	Choose the calling search space name from the drop-down list. This is an optional field.
Common Device Configuration	Specify the Configuration name of the device. This is an optional field.
Network Locale	Choose the location from the drop-down list. This is an optional field.
Location *	Choose a location from the drop-down list. For example: Cu2Si2-Location. This is a mandatory field.
Media Resource Group List	Enter a media resource to allocate for a device. This is an optional field.
AAR calling search space	Choose the appropriate calling search space for the device to use when it performs automated alternate routing (AAR) from the drop-down list. This is an optional field.

Field	Description
User Trusted Relay Point	Choose one of the following values: Off - Choose this value to disable the use of a Trusted Relay Point (TRP) with this device. This setting overrides the Use Trusted Relay Point setting in the common device configuration with which this device associates. On - Choose this value to enable the use of a TRP with this device. This setting overrides the Use Trusted Relay Point setting in the common device configuration with which this device associates. Default - If you choose this value, the device uses the Use Trusted Relay Point setting from the common device configuration with which this device associates.
AAR Group	Specify the automated alternate routing (AAR) group for this device. The AAR group provides the prefix digits that are used to route calls that are otherwise blocked due to insufficient bandwidth.
Geolocation	Specify the location name. This is an optional field.
Transmit UTF-8 for Calling Party Name	Keep the check box clear.
Port Number *	Configure the ports for the MGCP Endpoint. This is a mandatory field.
Trunk *	This field value auto-populates depending on the value set for the Port Number. This is a mandatory field.
Trunk Direction *	The field value auto-populates depending on the value set for the Number. This is a mandatory field.
Trunk Level *	The field value auto-populates depending on the value set for the Number. This is a mandatory field.
Attendant DN	Specify this field for group start and loop start. This is a mandatory field.
Prefix DN	Enter the prefix digits that are appended to the digits that this trunk receives on incoming calls.
Num Digits *	Enter the number of significant digits to collect between 0 to 32.
Expected Digits *	Enter the number of digits that are expected on the inbound side of the trunk. You can leave zero as the default value, if you are unsure.

Field	Description
SMDI Port Number (0 - 4096) *	Enter the first SMDI port number of the T1 span. If you set this parameter to a nonxero value and this gateway belongs to an unknown type of route list, route group, or route list, hunting does not continue beyond this span.
Unattended Port	Select this check box to indicate an unattended port on this device.
Line	Click + to expand Line.
Label	Use this field only if you do not want the directory number to show on the line appearance. Enter text that identifies this directory number for a line and phone combination.
E164 Mask	Indicate a phone number (or mask) that is used to send Caller ID information when a call is placed from the line. You can enter a maximum of 24 numbers, the international escape character + and 'X' characters. The Xs represent the directory number and must appear at the end of the pattern. For example, if you specify a mask of 972813XXXX, an external call from extension 1234 displays a caller ID number of 9728131234.
Dirn, Pattern *	Choose the route pattern from the drop-down list. For example: 08231006.
Dirn, Route Partition	Choose the partition to which the directory number belongs. Make sure that the directory number that you enter in the Directory Number field is unique within the partition that you choose. If you do not want to restrict access to the directory number, choose <None> for the partition.
Enduser	Click + to expand Enduser.
User ID	Choose the available user ID from drop-down list. For example: Subscriber 1.
Index	This field is the line position on the device. If left blank, an integer is automatically assigned.
Trunk Selection Order *	Choose the order from the drop-down list to display the call routing logic for the route pattern.

Field	Description
Key	Enter the Key for the product-specific configuration Layout. For example stcappRegCap.
Value	Enter the Key for the product-specific configuration layout. For example: 0.

Successful Scenario	Failure Scenario
Adding an Analog device with a phone line.	Removing the phone line from the endpoint.
Adding an Analog gateway without using enable command builder.	Adding a phone line after adding the command builder.
Removing the command builder after adding an analog gateway with command builder.	Adding an analog gateway without a phone line after adding a phone line to an endpoint. Note: Ensure to add the Directory Names to both endpoints.

Field	Description
IOS Device *	Choose the required IOS Device from the drop-down list. For example: IOS 11. This is a mandatory field. Note: The IOS device identifies the devices that are not associated with any Analog Gateways.
Product *	Choose the product from the drop-down list. For example: VG202, where VG represents Voice Gateway and 202 represents port. It has 2 ports, 0 and 1. This is a mandatory field. Note: The analog gateway supports the following models (FXS ports): VG202: 2 ports VG204: 4 ports VG224: 24 ports VG310: 24 ports VG320: 48 ports VG350: 144/160 ports VG400: 8 ports max VG420: 144 ports max VG450: 144 ports max
Protocol *	Choose the protocol from the drop-down list. The available protocols are SCCP and MGCP. This is a mandatory field.
Gateway Name *	Enter the MAC address of the analog gateway. For example: SKIGW0102030405, where SKI represents SCCP, GW represents gateway, and the last 10 digits represents the MAC address of the gateway. This is a mandatory field for the SCCP protocol.
Domain Name	Enter a fully qualified domain name. For example: E7C1VG310.hcsent17.com. This is a mandatory field for the MGCP protocol.
Call Manager Group *	Choose the call manager group from the drop-down list. For example: Default. This is a mandatory field. Note: Call Manager Group is default based on the site default device pool.
Enable Command Builder	Leave the check box clear to generate IOS commands, when Analog Gateway is added, deleted, or modified.

Field	Description
Gateway Network Interface *	Enter a Gateway Network Interface. For example: FastEthernet0/0, FastEthernet0/1, GigabitEthernet0/0, GigabitEthernet0/1 or GigabitEthernet0/2. This is a mandatory field. Note: Check the network interface at the Physical Device, then choose the appropriate Network Interface and Port as applicable. The Network Interface is used in Command Generation. Choose FastEthernet for all 2x series and GigabitEthernet** for all 3x series.
Call Disconnect Timeout *	Enter the time unit for Call Disconnect Timeout. For example: 2. This is a mandatory field. Note: The time unit always is in seconds. Do not enter any negative timer values.
CP Tone *	Choose the call progress tone (country code) from the drop-down list. For example: in (for India). This is a mandatory field. Note: CP Tone is an FXS configuration parameter that supports each analog device in the gateway.
Signal *	Choose a signal from the drop-down list. For example: loop-start or ground-start. This is a mandatory field. Note: Signal is an FXS configuration parameter that supports each analog device in the gateway.

Field	Description
Slot *	Choose the required value from the drop-down list. For example: 0. This is a mandatory field Note: Add only those Units (Modules) and Subunits that are listed in the drop-down list, without duplicate the units and subunit numbers. If duplicating entry is made for a slot, then the new slot overwrites the older configuration. You may lose previously configured endpoints. For VG310 model, do not choose any module for slot 1.
Module *	Choose the available module from the drop-down list. For example: NM-4VWIC-MBRD. Note: Only modules that are available for the slot appear in the list.
Subunits *	Click + to expand Subunits. This is a mandatory field.
Subunit Position *	Choose the subunit position from the drop-down list. For example: 0. Note: Subunit position 1 on the VG310 gateway has no available hardware by design, so choosing a value of 1 in this drop-down will not allow you to continue. Please choose a different subunit position to continue setting up your gateway.
Subunit *	Choose the subunit from the drop-down list. For example: VIC3-2FXS-E/DID-SCCP.

Option	Description
Gateway Name	GUI read-only field is populated from the analog gateway for the SCCP protocol. This is a mandatory field.
Slot *	GUI read-only field is populated from the gateway units. This is a mandatory field.
Subunit Position *	GUI read-only field is populated from the gateway units. This is a mandatory field.
Port Number *	GUI read-only field is populated from the gateway units. This is a mandatory field.
Product Type *	Choose the product type from the drop-down list. For example: Analog Phone. This is a mandatory field.
Device Protocol *	Choose the device protocol from the drop-down list. This is a mandatory field.
Device Name *	GUI read-only field is populated from the analog gateway. This is a mandatory field.
Description	When the endpoint is added, the default description is in the format: Endpoint for slot/subunit/port n/n/n gateway @domain that can be updated if required. This is an optional field and accepts a string value.
Device Pool *	Choose the device pool from the drop-down list. For example: Cu2Si2-DevicePool. This is a mandatory field.
Phone Button Template *	Choose the phone button template from the drop-down list. For example: Standard Analog. This has a specific phone button template for the analog gateway. This is a mandatory field.
Common Phone Profile *	Choose the common phone profile from the drop-down list. For example: Standard Common Phone Profile. It includes the attributes (services or features) that are associated with a particular user. This is a mandatory field.
Calling Search Space	From the drop-down list, choose the appropriate calling search space. The calling search space specifies a collection of partitions that are searched to determine how a collected (originating) number should be routed.
AAR Calling Search Space	Choose the appropriate calling search space for the device to use when it performs automated alternate routing (AAR). The AAR calling search space specifies the collection of route partitions that are searched to determine how to route a collected (originating) number that is otherwise blocked due to insufficient bandwidth.
Media Resource Group List	This list provides a prioritized grouping of media resource groups. An application chooses the required media resource, such as a Music On Hold server, from among the available media resources according to the priority order that a Media Resource Group List defines.
Location *	Choose a location from the drop-down list. For example: Cu2Si2-Location. This is a mandatory field.
AAR Group	Specify the automated alternate routing (AAR) group for this device. The AAR group provides the prefix digits that are used to route calls that are otherwise blocked due to insufficient bandwidth.
Owner	Choose from the drop-down list.

Option	Description
Always Use Prime Line for Voice Message	Choose the required options from the drop-down list. For example: On, Off or Default. This is a mandatory field. This specifies whether the device will always use the prime line for voice messages.
Geolocation	From the drop-down list, choose a geolocation. You can choose the Unspecified geolocation, which designates that this device does not associate with a geolocation.
Transmit UTF-8 for Calling Party Name	Keep the check box clear.
Called Party Transformation CSS	This setting allows you to send transformed called party number in SETUP message for outgoing calls. Make sure that the Called Party Transformation CSS that you choose contains the called party transformation pattern that you want to assign to this device. Note: If the Called Party Transformation CSS is configured as <None>, the transformation does not match and does not get applied. Ensure that you configure the Called Party Transformation CSS in a non-null partition that is not used for routing.
Use Device Pool Called Party Transformation CSS	Select the check box.
Allow Control Of Device From CTI	Select the check box.
Logged Into Hunt Group	Select the check box.
Calling Party Transformation CSS (Caller ID For Calls From This Phone)	This setting allows you to send transformed calling party number in SETUP message for outgoing calls. Also when redirection occurs for outbound calls, this CSS will be used to transform the connected number sent from Cisco Unified Communications Manager side in outgoing NOTIFY messages. Make sure that the Calling Party Transformation CSS that you choose contains the calling party transformation pattern that you want to assign to this device. Note: If the Calling Party Transformation CSS is configured as <None>, the transformation does not match and does not get applied. Ensure that you configure the Calling Party Transformation Pattern in a non-null partition that is not used for routing.
Use Device Pool Calling Party Transformation CSS (Caller ID for Calls From This Phone)	Select the check box.
Calling Party Transformation CSS (Device Mobility Related Information)

Field	Description
Use Device Pool Calling Party Transformation CSS (Device Mobility Related Information)	Select the check box.
BLF Presence Group *	Choose the presence group for busy lamp field buttons from the drop-down list. For example: Standard Presence group is the default value. This is a mandatory field.
Device Security Profile *	Choose options from the drop-down list. For example: Analog Phone - Standard SCCP Non-Secure Profile. This is mandatory field.
MLPP Domain	If you leave the value <None>, this device inherits its MLPP domain from the value that was set for the device pool of this device. If the device pool does not have an MLPP Domain setting, this device inherits its MLPP domain from the value that was set for the MLPP Domain Identifier enterprise parameter.
MLPP Indication	Choose options from the drop-down list. For example: On, Off, or Default. This is a mandatory field.
MLPP Preemption	Choose options from the drop-down list. For example: Disabled, Forceful, Default. This is a mandatory field. Note: If there are any changes to be performed to analog phone line then do not refer line settings. For example: Changing CSS is done under Subscriber Management.
Line	Click + to expand Line.
Pattern *	Choose the route pattern from the drop-down list. For example: 08231006
Enduser	Click + to expand Enduser.
User ID	Choose the available user ID from the drop-down list. For example: Subscriber 1
Product Specific Configuration Layout	Click + to expand Product Specific Configuration Layout.
Key	Enter the Key for the product specific configuration layout. For example: stcappRegCap.
Value	Enter the Key for the product specific configuration layout. For example: 0.

Option	Description
Domain Name	GUI read-only field is populated from the analog gateway for the MGCP protocol. This is a mandatory field.
Slot *	GUI read-only field is populated from the gateway units. This is a mandatory field.
Subunit Position *	GUI read-only field is populated from the gateway units. This is a mandatory field.
Port Number *	GUI read-only field is populated from the gateway units. This is a mandatory field.
Product Type *	Choose the product type from the drop- down list. For example: Analog Phone. This is a mandatory field.
Device Protocol *	Choose the device protocol from the drop-down list. For example: SCCP. This is a mandatory field.
Protocol Side *	This is a read-only field except when creating a device. This is a mandatory field.
Class *	This is a read-only field except when creating a device. This is a mandatory field.
Device Name *	GUI read-only field is populated from the analog gateway. This is a mandatory field.
Description	When the endpoint is added, the default description is in the format: Endpoint for slot/subunit/port n/n/n gateway @domain. Update it with an optional description for the device. This is an optional field and accepts a string value.
Device Pool	Choose the device pool from the drop-down list. For example: Cu2Si2-DevicePool. This is a mandatory field.
Calling Search Space	Choose the space name from the drop-down list. This is an optional field.
Common Device Configuration	Specify the Configuration name of the device. This is an optional field.
Network Locale	Choose the location from the drop-down list. This is an optional field.
Location *	Choose a location from the drop-down list. For example: Cu2Si2-Location. This is a mandatory field.
Media Resource Group List	Choose a media resource to allocate for a device. This is an optional field.
AAR calling search space	Choose the appropriate calling search space for the device to use when it performs automated alternate routing (AAR) from the drop-down list. This is an optional field.

Field	Description
Use Trusted Relay Point	Choose one of the following values: Off - Choose this value to disable the use of a Trusted Relay Point (TRP) with this device. This setting overrides the Use Trusted Relay Point setting in the common device configuration with which this device associates. On - Choose this value to enable the use of a TRP with this device. This setting overrides the Use Trusted Relay Point setting in the common device configuration with which this device associates. Default - If you choose this value, the device uses the Use Trusted Relay Point setting from the common device configuration with which this device associates.
AAR Group	Specify the automated alternate routing (AAR) group for this device. The AAR group provides the prefix digits that are used to route calls that are otherwise blocked due to insufficient bandwidth.
Geolocation	Specify the location name. This is an optional field.
Transmit UTF-8 for Calling Perty Name MLPP Preemption	Keep the check box cleared.
Port Number *	Configure the ports for the MGCP Endpoint. This is a mandatory field.
Trunk *	This field value auto-populates depending on the value set for the Port Number. This is a mandatory field.
Trunk Direction *	The field value auto-populates depending on the value set for the Number. This is a mandatory field.
Trunk Level *	The field value auto-populates depending on the value set for the Number. This is a mandatory field.
Attendant DN	Specify this field for group start and loop start. This is a mandatory field.
Prefix DN	Enter the prefix digits that are appended to the digits that this trunk receives on incoming calls.
Num Digits *	Enter the number of significant digits to collect between 0 to 32.
Expected Digits *	Enter the number of digits that are expected on the inbound side of the trunk. You can leave zero as the default value, if you are unsure.

Field	Description
SMDI Port Number (0 - 4096) *	Enter the first SMDI port number of the T1 span. If you set this parameter to a nonxero value and this gateway belongs to an unknown type of route list, route group, or route list, hunting does not continue beyond this span.
Unattended Port	Select this check box to indicate an unattended port on this device.
Line	Click + to expand Line.
Label	Use this field only if you do not want the directory number to show on the line appearance. Enter text that identifies this directory number for a line and phone combination.
E164 Mask	Indicate a phone number (or mask) that is used to send Caller ID information when a call is placed from the line. You can enter a maximum of 24 numbers, the international escape character + and 'X' characters. The Xs represent the directory number and must appear at the end of the pattern. For example, if you specify a mask of 972813XXXX, an external call from extension 1234 displays a caller ID number of 9728131234.
Dirn, Pattern *	Choose the route pattern from the drop-down list. For example: 08231006.
Dirn, Route Partition	Choose the partition to which the directory number belongs. Make sure that the directory number that you enter in the Directory Number field is unique within the partition that you choose. If you do not want to restrict access to the directory number, choose <None> for the partition.
Enduser	Click + to expand Enduser.
User ID	Choose the available user ID from drop-down list. For example: Subscriber 1.
Index	This field is the line position on the device. If left blank, an integer is automatically assigned.
Trunk Selection Order *	Choose the order from the drop-down list to display the call routing logic for the route pattern.

Field	Description
Key	Enter the Key for the product-specific configuration Layout. For example stcappRegCap.
Value	Enter the Key for the product-specific configuration layout. For example: 0.

An asterisk * in the title indicates the field is mandatory.
If a field has a default value, it is shown in the Description column.
If the field type is an array, the Field Name has a .[n] suffix, where n is the array index placeholder.
Object and array field names are listed to provide context. If a field belongs to an object or an array, the full field name is shown in dot separated notation.

Title											Description	Details
Product *												Field Name: product Type: String Cardinality: [1..1] Choices: ["7914 14-Button Line Expansion Module", "7915 12-Button Line Expansion Module", "7915 24-Button Line Expansion Module", "7916 12-Button Line Expansion Module", "7916 24-Button Line Expansion Module", "AIM-VOICE-30", "Analog Phone", "Annunciator", "BEKEM 36-Button Line Expansion Module", "C881V", "C887VA-V", "CKEM 36-Button Line Expansion Module", "CP-8800-Audio 28-Button Key Expansion Module", "CP-8800-Video 28-Button Key Expansion Module", "CTI Port", "CTI Remote Device", "CTI Route Point", "Carrier-integrated Mobile", "Cisco IAD2400", "Cisco 12 S", "Cisco 12 SP", "Cisco 12 SP+", "Cisco 1751", "Cisco 1760", "Cisco 1861", "Cisco 269X", "Cisco 26XX", "Cisco 2801", "Cisco 2811", "Cisco 2821", "Cisco 2851", "Cisco 2901", "Cisco 2911", "Cisco 2921", "Cisco 2951", "Cisco 30 SP+", "Cisco 30 VIP", "Cisco 362X", "Cisco 364X", "Cisco 366X", "Cisco 3725", "Cisco 3745", "Cisco 3825", "Cisco 3845", "Cisco 3905", "Cisco 3911", "Cisco 3925", "Cisco 3925E", "Cisco 3945", "Cisco 3945E", "Cisco 3951", "Cisco 6901", "Cisco 6911", "Cisco 6921", "Cisco 6941", "Cisco 6945", "Cisco 6961", "Cisco 7811", "Cisco 7821", "Cisco 7832", "Cisco 7841", "Cisco 7861", "Cisco 7902", "Cisco 7905", "Cisco 7906", "Cisco 7910", "Cisco 7911", "Cisco 7912", "Cisco 7920", "Cisco 7921", "Cisco 7925", "Cisco 7926", "Cisco 7931", "Cisco 7935", "Cisco 7936", "Cisco 7937", "Cisco 7940", "Cisco 7941", "Cisco 7941G-GE", "Cisco 7942", "Cisco 7945", "Cisco 7960", "Cisco 7961", "Cisco 7961G-GE", "Cisco 7962", "Cisco 7965", "Cisco 7970", "Cisco 7971", "Cisco 7975", "Cisco 7985", "Cisco 860", "Cisco 881", "Cisco 8811", "Cisco 8821", "Cisco 8831", "Cisco 8832", "Cisco 8832NR", "Cisco 8841", "Cisco 8845", "Cisco 8851", "Cisco 8851NR", "Cisco 8861", "Cisco 8865", "Cisco 8865NR", "Cisco 888/887/886", "Cisco 8941", "Cisco 8945", "Cisco 8961", "Cisco 9951", "Cisco 9971", "Cisco ATA 186", "Cisco ATA 187", "Cisco ATA 190", "Cisco ATA 191", "Cisco C8200/L-1N-4T", "Cisco C8300-1N1S-4T2X", "Cisco C8300-1N1S-6T", "Cisco C8300-2N2S-4T2X/6T", "Cisco Catalyst 4000 Access Gateway Module", "Cisco Catalyst 4224 Voice Gateway Switch", "Cisco Catalyst 6000 12 port FXO Gateway", "Cisco Catalyst 6000 24 port FXS Gateway", "Cisco Catalyst 6000 E1 VoIP Gateway", "Cisco Catalyst 6000 T1 VoIP Gateway", "Cisco Cius", "Cisco Cius SP", "Cisco Collaboration Mobile Convergence", "Cisco Conference Bridge (WS-SVC-CMM)", "Cisco Conference Bridge Hardware", "Cisco Conference Bridge Software", "Cisco DX650", "Cisco DX70", "Cisco DX80", "Cisco Dual Mode for Android", "Cisco Dual Mode for iPhone", "Cisco E20", "Cisco ENCS 5400 ISRV", "Cisco IOS Conference Bridge", "Cisco IOS Enhanced Conference Bridge", "Cisco IOS Enhanced Media Termination Point", "Cisco IOS Enhanced Software Media Termination Point", "Cisco IOS Guaranteed Audio Video Conference Bridge", "Cisco IOS Heterogeneous Video Conference Bridge", "Cisco IOS Homogeneous Video Conference Bridge", "Cisco IOS Media Termination Point", "Cisco IP Communicator", "Cisco ISR 4321", "Cisco ISR 4331", "Cisco ISR 4351", "Cisco ISR 4431", "Cisco ISR 4451", "Cisco ISR 4461", "Cisco Jabber for Tablet", "Cisco MGCP BRI Port", "Cisco MGCP E1 Port", "Cisco MGCP FXO Port", "Cisco MGCP FXS Port", "Cisco MGCP T1 Port", "Cisco Media Server (WS-SVC-CMM-MS)", "Cisco Media Termination Point (WS-SVC-CMM)", "Cisco Media Termination Point Hardware", "Cisco Media Termination Point Software", "Cisco Meeting Server", "Cisco SIP FXS Port", "Cisco Spark Remote Device", "Cisco TelePresence", "Cisco TelePresence 1000", "Cisco TelePresence 1100", "Cisco TelePresence 1300-47", "Cisco TelePresence 1300-65", "Cisco TelePresence 200", "Cisco TelePresence 3000", "Cisco TelePresence 3200", "Cisco TelePresence 400", "Cisco TelePresence 500-32", "Cisco TelePresence 500-37", "Cisco TelePresence Codec C40", "Cisco TelePresence Codec C60", "Cisco TelePresence Codec C90", "Cisco TelePresence Conductor", "Cisco TelePresence DX70", "Cisco TelePresence EX60", "Cisco TelePresence EX90", "Cisco TelePresence Exchange System", "Cisco TelePresence IX5000", "Cisco TelePresence MCU", "Cisco TelePresence MX200", "Cisco TelePresence MX200 G2", "Cisco TelePresence MX300", "Cisco TelePresence MX300 G2", "Cisco TelePresence MX700", "Cisco TelePresence MX800", "Cisco TelePresence MX800 Dual", "Cisco TelePresence Profile 42 (C20)", "Cisco TelePresence Profile 42 (C40)", "Cisco TelePresence Profile 42 (C60)", "Cisco TelePresence Profile 52 (C40)", "Cisco TelePresence Profile 52 (C60)", "Cisco TelePresence Profile 52 Dual (C60)", "Cisco TelePresence Profile 65 (C60)", "Cisco TelePresence Profile 65 Dual (C90)", "Cisco TelePresence Quick Set C20", "Cisco TelePresence SX10", "Cisco TelePresence SX20", "Cisco TelePresence SX80", "Cisco TelePresence TX1310-65", "Cisco TelePresence TX9000", "Cisco TelePresence TX9200", "Cisco Unified Client Services Framework", "Cisco Unified Communications for RTX", "Cisco Unified Mobile Communicator", "Cisco Unified Personal Communicator", "Cisco VG200", "Cisco VG248 Gateway", "Cisco VGC Phone", "Cisco VGC Virtual Phone", "Cisco VGD-1T3", "Cisco VXC 6215", "Cisco Video Conference Bridge(IPVC-35xx)", "Cisco Voice Mail Port", "Cisco Webex Board 55", "Cisco Webex Board 70", "Cisco Webex Board 85", "Cisco Webex DX80", "Cisco Webex Desk LE", "Cisco Webex Desk Pro", "Cisco Webex Room 55", "Cisco Webex Room 55 Dual", "Cisco Webex Room 70 Dual", "Cisco Webex Room 70 Dual G2", "Cisco Webex Room 70 Panorama", "Cisco Webex Room 70 Single", "Cisco Webex Room 70 Single G2", "Cisco Webex Room Kit", "Cisco Webex Room Kit Mini", "Cisco Webex Room Kit Plus", "Cisco Webex Room Kit Pro", "Cisco Webex Room Panorama", "Cisco Webex Room Phone", "Cisco Webex VDI Svc Framework", "Communication Media Module", "EMCC Base Phone", "FLEX_SLOT", "Gatekeeper", "Generic Desktop Video Endpoint", "Generic Multiple Screen Room System", "Generic Single Screen Room System", "H.225 Trunk (Gatekeeper Controlled)", "H.323 Client", "H.323 Gateway", "Hunt List", "IAD2400_ANALOG", "IAD2400_DIGITAL", "IMS-integrated Mobile (Basic)", "IP-STE", "ISDN BRI Phone", "Inter-Cluster Trunk (Gatekeeper Controlled)", "Inter-Cluster Trunk (Non-Gatekeeper Controlled)", "Interactive Voice Response", "Load Simulator", "Motorola CN622", "Music On Hold", "NM-1V", "NM-2V", "NM-4VWIC-MBRD", "NM-HD-1V", "NM-HD-2V", "NM-HD-2VE", "NM-HDA", "NM-HDV", "NM-HDV2-0PORT", "NM-HDV2-1PORT", "NM-HDV2-2PORT", "Nokia S60", "PA-MCX", "PA-VXA", "PA-VXB", "PA-VXC", "Pilot", "Remote Destination Profile", "Route List", "SCCP Device", "SCCP gateway virtual phone", "SIP Trunk", "SIP WSM Connection", "SPA8800", "Third-party AS-SIP Endpoint", "Third-party SIP Device (Advanced)", "Third-party SIP Device (Basic)", "Transnova S3", "Universal Device Template", "Unknown", "VG202", "VG204", "VG224", "VG310", "VG320", "VG350", "VG400", "VG420", "VG450", "VGC Port", "VIC_SLOT", "VKEM 36-Button Line Expansion Module", "VNM-HDA", "VWIC_SLOT", "WS-SVC-CMM-MS", "WS-X6600"]
Call Manager Group Name												Field Name: callManagerGroupName Type: String Target: device/cucm/CallManagerGroup Target attr: name Cardinality: [1..1] Format: uri
Protocol *												Field Name: protocol Type: String Cardinality: [1..1] Choices: ["SCCP", "Digital Access PRI", "H.225", "Analog Access", "Digital Access T1", "Route Point", "Unicast Bridge", "Multicast Point", "Inter-Cluster Trunk", "RAS", "Digital Access BRI", "SIP", "MGCP", "Static SIP Mobile Subscriber", "SIP Connector", "Remote Destination", "Mobile Smart Client", "Digital Access E1 R2", "CTI Remote Device", "Protocol Not Specified"]
Description												Field Name: description Type: String Cardinality: [0..1]
Domain Name *											For SCCP mention MAC Address	Field Name: domainName Type: String Cardinality: [1..1]
	Vendor Config											Field Name: vendorConfig.[n] Type: Array
		Value										Field Name: vendorConfig.[n].value Type: Any
		Key										Field Name: vendorConfig.[n].key Type: String
Units												Field Name: units Type: ["Object", "Null"] Cardinality: [0..1]
		Unit										Field Name: unit.[n] Type: Array Cardinality: [1..n]
			Index *									Field Name: units.unit.[n].index Type: Integer Cardinality: [1..1]
			Product *									Field Name: units.unit.[n].product Type: ["String", "Null"] Cardinality: [1..1] Choices: ["AIM-VOICE-30 (2 subunits)", "AIM-VOICE-30-SLOT-0 (3 subunits- slot 0 only)", "ANALOG", "C-SM-NIM-ADPT", "DIGITAL", "ENCS-1NIM-MBRD", "EVM-HD", "FLEX-SLOT", "GENERIC-SLOT", "ISR-2NIM-MBRD", "ISR-3NIM-MBRD", "NM-1V", "NM-2V", "NM-3VWIC-MBRD", "NM-4VWIC-MBRD", "NM-HD-1V", "NM-HD-2V", "NM-HD-2VE", "NM-HDA", "NM-HDV", "NM-HDV2-0PORT", "NM-HDV2-1PORT-E1", "NM-HDV2-1PORT-T1", "NM-HDV2-2PORT-E1", "NM-HDV2-2PORT-T1", "NONE", "PA-MCX", "PA-VXA", "PA-VXB", "PA-VXC", "SM-X-NIM-ADPTR", "VG-1NIM-MBRD", "VG-2VWIC-MBRD", "VG-3VWIC-MBRD", "VGC_PORT", "VIC-SLOT", "VWIC-SLOT", "WS-X6600"]
			Subunits									Field Name: subunits Type: ["Object", "Null"] Cardinality: [0..1]
					Subunit							Field Name: subunit.[n] Type: Array Cardinality: [1..n]
						Index *						Field Name: units.unit.[n].subunits.subunit.[n].index Type: ["Integer", "Null"] Cardinality: [1..1]
						Product *						Field Name: units.unit.[n].subunits.subunit.[n].product Type: ["String", "Null"] Cardinality: [1..1] Choices: ["16FXS", "16FXS8FXO", "1T1", "24FXS", "24FXS-SCCP", "2FXS-MGCP", "2FXS-SCCP", "48_PORTS", "4FXS-MGCP", "4FXS-SCCP", "8FXS", "EM-4BRI-NT/TE", "EM-4BRI-NT/TE-EM0", "EM-4BRI-NT/TE-EM1", "EM-4BRI-NT/TE-SCCP", "EM-4FXO-EM0", "EM-4FXO-EM1", "EM-8FXS-EM0", "EM-8FXS-EM0-SCCP", "EM-8FXS-EM1", "EM-8FXS-EM1-SCCP", "EM-HDA-3FXS/4FXO", "EM-HDA-3FXS/4FXO-SCCP", "EM-HDA-6FXO", "EM-HDA-8FXS", "EM-HDA-8FXS-SCCP", "EM2-4FXO-EM0", "EM2-4FXO-EM1", "EM3-HDA-8FXS/DID", "EM3-HDA-8FXS/DID-SCCP", "EVM-HD-8FXS/DID", "EVM-HD-8FXS/DID-SCCP", "HWIC-1CE1T1-PRI-E1", "HWIC-1CE1T1-PRI-T1", "HWIC-2CE1T1-PRI-E1", "HWIC-2CE1T1-PRI-T1", "HWIC-4CE1T1-PRI-E1", "HWIC-4CE1T1-PRI-T1", "Intelbras 80 Port FXS", "NIM-1CE1T1-PRI-E1", "NIM-1CE1T1-PRI-T1", "NIM-1MFT-T1E1-E1", "NIM-1MFT-T1E1-T1", "NIM-2BRI-NT/TE", "NIM-2BRI-NT/TE-SCCP", "NIM-2CE1T1-PRI-E1", "NIM-2CE1T1-PRI-T1", "NIM-2FXO", "NIM-2FXS", "NIM-2FXS-SCCP", "NIM-2FXS-SIP", "NIM-2FXS/4FXO", "NIM-2FXS/4FXO-SCCP", "NIM-2FXS/4FXO-SIP", "NIM-2MFT-T1E1-E1", "NIM-2MFT-T1E1-T1", "NIM-4BRI-NT/TE", "NIM-4BRI-NT/TE-SCCP", "NIM-4FXO", "NIM-4FXS", "NIM-4FXS-SCCP", "NIM-4FXS-SIP", "NIM-4MFT-T1E1-E1", "NIM-4MFT-T1E1-T1", "NIM-8CE1T1-PRI-E1", "NIM-8CE1T1-PRI-T1", "NIM-8MFT-T1E1-E1", "NIM-8MFT-T1E1-T1", "NM-HDA-4FXS", "NM-HDA-4FXS-SCCP", "NM-HDV2-ONBOARD-E1", "NM-HDV2-ONBOARD-E1-2PORT", "NM-HDV2-ONBOARD-T1", "NM-HDV2-ONBOARD-T1-2PORT", "PA-MCX-2TE1-E1", "PA-MCX-2TE1-T1", "PA-MCX-4TE1-E1", "PA-MCX-4TE1-T1", "PA-MCX-6TE1-E1", "PA-MCX-6TE1-T1", "PA-MCX-8TE1-E1", "PA-MCX-8TE1-T1", "PA-VXA-1TE1-24-T1", "PA-VXA-1TE1-30-E1", "PA-VXB-2TE1-E1", "PA-VXB-2TE1-T1", "PA-VXC-2TE1-E1", "PA-VXC-2TE1-T1", "SM-D-48FXS-E", "SM-D-48FXS-E-SCCP", "SM-D-72FXS", "SM-D-72FXS-SCCP", "SM-V-132FXS/6FXO", "SM-V-132FXS/6FXO-SCCP", "SM-V-132FXS/6FXO-SIP", "SM-V-144FXS", "SM-V-144FXS-SCCP", "SM-V-144FXS-SIP", "SM-V-84FXS/6FXO", "SM-V-84FXS/6FXO-SCCP", "SM-V-84FXS/6FXO-SIP", "SM-X-16FXS-SIP", "SM-X-16FXS/2FXO", "SM-X-16FXS/2FXO-SCCP", "SM-X-24FXS-SIP", "SM-X-24FXS/4FXO", "SM-X-24FXS/4FXO-SCCP", "SM-X-56FXS", "SM-X-56FXS-SCCP", "SM-X-56FXS-SIP", "SM-X-72FXS", "SM-X-72FXS-SCCP", "SM-X-72FXS-SIP", "SM-X-8FXS-SIP", "SM-X-8FXS/12FXO", "SM-X-8FXS/12FXO-SCCP", "VG-2FXS/2FXO", "VG-2FXS/2FXO-SCCP", "VG-4FXS/4FXO", "VG-4FXS/4FXO-SCCP", "VG-6FXS/6FXO", "VG-6FXS/6FXO-SCCP", "VG-8FXS", "VG-8FXS-SCCP", "VGD-DFC-CT3", "VIC-16FXS", "VIC-2BRI", "VIC-2FXO", "VIC-2FXS", "VIC-2FXS-SCCP", "VIC-4FXO", "VIC-4FXS", "VIC-4FXS-SCCP", "VIC-4FXS/DID", "VIC-8FXO", "VIC-8FXS", "VIC2-1BRI", "VIC2-1FXO", "VIC2-1MFT-T1E1-E1", "VIC2-1MFT-T1E1-T1", "VIC2-2BRI", "VIC2-2BRI-NT/TE-SCCP", "VIC2-2FXO", "VIC2-2FXS", "VIC2-2FXS-SCCP", "VIC2-2MFT-T1E1-E1", "VIC2-2MFT-T1E1-T1", "VIC2-4FXO", "VIC3-2FXS-E/DID", "VIC3-2FXS-E/DID-SCCP", "VIC3-2FXS/DID", "VIC3-2FXS/DID-SCCP", "VIC3-4FXS/DID", "VIC3-4FXS/DID-SCCP", "VIC_NONE", "VWIC-1MFT-E1", "VWIC-1MFT-T1", "VWIC-2MFT-E1", "VWIC-2MFT-T1", "VWIC2-1MFT-G703-E1", "VWIC2-1MFT-G703-T1", "VWIC2-1MFT-T1E1-E1", "VWIC2-1MFT-T1E1-T1", "VWIC2-2MFT-G703-E1", "VWIC2-2MFT-G703-T1", "VWIC2-2MFT-T1E1-E1", "VWIC2-2MFT-T1E1-T1", "VWIC3-1MFT-G703-E1", "VWIC3-1MFT-G703-T1", "VWIC3-1MFT-T1E1-E1", "VWIC3-1MFT-T1E1-T1", "VWIC3-2MFT-G703-E1", "VWIC3-2MFT-G703-T1", "VWIC3-2MFT-T1E1-E1", "VWIC3-2MFT-T1E1-T1", "VWIC3-4MFT-T1E1-E1", "VWIC3-4MFT-T1E1-T1", "WS-SVC-CMM-MS", "WS-U4604-16FXS", "WS-U4604-8FXO-2FXS", "WS-U4604-8FXS", "WS-X6600-24FXS", "WS-X6600-6E1", "WS-X6600-6T1"]
						Begin Port						Field Name: units.unit.[n].subunits.subunit.[n].beginPort Type: ["Integer", "Null"] Cardinality: [0..1]
	Endpoints											Field Name: Endpoints.[n] Type: Array
		Subunit *										Field Name: Endpoints.[n].subunit Type: ["Integer", "Null"] Cardinality: [1..1]
		Endpoint										Field Name: endpoint Type: ["Object", "Null"] Cardinality: [1..1]
			Protocol *								Protocol option is read-only,except when creating a device.	Field Name: Endpoints.[n].endpoint.protocol Type: String Cardinality: [1..1] Choices: ["SCCP", "Digital Access PRI", "H.225", "Analog Access", "Digital Access T1", "Route Point", "Unicast Bridge", "Multicast Point", "Inter-Cluster Trunk", "RAS", "Digital Access BRI", "SIP", "MGCP", "Static SIP Mobile Subscriber", "SIP Connector", "Remote Destination", "Mobile Smart Client", "Digital Access E1 R2", "CTI Remote Device", "Protocol Not Specified"]
			Geo Location Filter Name									Field Name: Endpoints.[n].endpoint.geoLocationFilterName Type: ["String", "Null"] Target: device/cucm/GeoLocationFilter Target attr: name Cardinality: [0..1] Format: uri
			Calling Party Strip Digits									Field Name: Endpoints.[n].endpoint.callingPartyStripDigits Type: ["Integer", "Null"] Cardinality: [0..1]
				Vendor Config								Field Name: vendorConfig.[n] Type: Array
					Value							Field Name: Endpoints.[n].endpoint.vendorConfig.[n].value Type: Any
					Key							Field Name: Endpoints.[n].endpoint.vendorConfig.[n].key Type: String
			Always Use Prime Line *								Default: Default	Field Name: Endpoints.[n].endpoint.alwaysUsePrimeLine Type: String Cardinality: [1..1] Default: Default Choices: ["Off", "On", "Default"]
			Calling Party Unknown Transformation Css Name									Field Name: Endpoints.[n].endpoint.callingPartyUnknownTransformationCssName Type: ["String", "Null"] Target: device/cucm/Css Target attr: name Cardinality: [0..1] Format: uri
			Phone Template Name *									Field Name: Endpoints.[n].endpoint.phoneTemplateName Type: String Target: device/cucm/PhoneButtonTemplate Target attr: name Cardinality: [1..1] Format: uri
			Calling Search Space Name									Field Name: Endpoints.[n].endpoint.callingSearchSpaceName Type: ["String", "Null"] Target: device/cucm/Css Target attr: name Cardinality: [0..1] Format: uri
			Index *									Field Name: Endpoints.[n].endpoint.index Type: Integer Cardinality: [1..1]
			Allow Cti Control Flag								Applicable only for SCCP	Field Name: Endpoints.[n].endpoint.allowCtiControlFlag Type: Boolean Cardinality: [0..1]
			Packet Capture Duration									Field Name: Endpoints.[n].endpoint.packetCaptureDuration Type: ["Integer", "Null"] Cardinality: [0..1]
			Use Trusted Relay Point *								Default: Default	Field Name: Endpoints.[n].endpoint.useTrustedRelayPoint Type: String Cardinality: [1..1] Default: Default Choices: ["Off", "On", "Default"]
			Pstn Access								Default: True	Field Name: Endpoints.[n].endpoint.pstnAccess Type: Boolean Cardinality: [0..1] Default: True
			Common Device Config Name									Field Name: Endpoints.[n].endpoint.commonDeviceConfigName Type: ["String", "Null"] Target: device/cucm/CommonDeviceConfig Target attr: name Cardinality: [0..1] Format: uri
			Network Locale									Field Name: Endpoints.[n].endpoint.networkLocale Type: ["String", "Null"] Target: device/cucm/Country Target attr: name Cardinality: [0..1] Format: uri Choices: ["Argentina", "Australia", "Austria", "Belgium", "Brazil", "Canada", "China", "Colombia", "Cyprus", "Czech Republic", "Denmark", "Egypt", "Finland", "France", "Germany", "Ghana", "Greece", "Hong Kong", "Hungary", "Iceland", "India", "Indonesia", "Ireland", "Israel", "Italy", "Japan", "Jordan", "Kenya", "Korea Republic", "Lebanon", "Luxembourg", "Malaysia", "Mexico", "Nepal", "Netherlands", "New Zealand", "Nigeria", "Norway", "Pakistan", "Panama", "Peru", "Philippines", "Poland", "Portugal", "Russian Federation", "Saudi Arabia", "Singapore", "Slovakia", "Slovenia", "South Africa", "Spain", "Sweden", "Switzerland", "Taiwan", "Thailand", "Turkey", "United Kingdom", "United States", "Venezuela", "Zimbabwe", "Itu", "Chile", "Bulgaria", "Croatia", "Romania", "Serbia and Montenegro", "United Arab Emirates", "Oman", "Kuwait", "Algeria", "Bahrain", "Iraq", "Mauritania", "Republic of Montenegro", "Morocco", "Qatar", "Republic of Serbia", "Sudan", "Tunisia", "Vietnam", "Yemen", "Lithuania", "Latvia", "Estonia", "Ukraine"]
			Mlpp Indication Status								This setting only affects devices that support MLPP. Default: Off	Field Name: Endpoints.[n].endpoint.mlppIndicationStatus Type: String Cardinality: [0..1] Default: Off Choices: ["Off", "On", "Default"]
			Owner User Id								Applicable only for SCCP	Field Name: Endpoints.[n].endpoint.ownerUserId Type: ["String", "Null"] Target: device/cucm/User Target attr: userid Cardinality: [0..1] Format: uri
			Media Resource List Name									Field Name: Endpoints.[n].endpoint.mediaResourceListName Type: ["String", "Null"] Target: device/cucm/MediaResourceList Target attr: name Cardinality: [0..1] Format: uri
			Packet Capture Mode								Default: None	Field Name: Endpoints.[n].endpoint.packetCaptureMode Type: String Cardinality: [0..1] Default: None Choices: ["None", "Batch Processing Mode"]
			Unattended Port								Applicable only for SCCP	Field Name: Endpoints.[n].endpoint.unattendedPort Type: ["Boolean", "Null"] Cardinality: [0..1]
			Use Device Pool Cgpn Transform Css								Default: True	Field Name: Endpoints.[n].endpoint.useDevicePoolCgpnTransformCss Type: Boolean Cardinality: [0..1] Default: True
			Product *								Product ID string. read-only except when creating a device.	Field Name: Endpoints.[n].endpoint.product Type: String Cardinality: [1..1] Choices: ["7914 14-Button Line Expansion Module", "7915 12-Button Line Expansion Module", "7915 24-Button Line Expansion Module", "7916 12-Button Line Expansion Module", "7916 24-Button Line Expansion Module", "AIM-VOICE-30", "Analog Phone", "Annunciator", "BEKEM 36-Button Line Expansion Module", "C881V", "C887VA-V", "CKEM 36-Button Line Expansion Module", "CP-8800-Audio 28-Button Key Expansion Module", "CP-8800-Video 28-Button Key Expansion Module", "CTI Port", "CTI Remote Device", "CTI Route Point", "Carrier-integrated Mobile", "Cisco IAD2400", "Cisco 12 S", "Cisco 12 SP", "Cisco 12 SP+", "Cisco 1751", "Cisco 1760", "Cisco 1861", "Cisco 269X", "Cisco 26XX", "Cisco 2801", "Cisco 2811", "Cisco 2821", "Cisco 2851", "Cisco 2901", "Cisco 2911", "Cisco 2921", "Cisco 2951", "Cisco 30 SP+", "Cisco 30 VIP", "Cisco 362X", "Cisco 364X", "Cisco 366X", "Cisco 3725", "Cisco 3745", "Cisco 3825", "Cisco 3845", "Cisco 3905", "Cisco 3911", "Cisco 3925", "Cisco 3925E", "Cisco 3945", "Cisco 3945E", "Cisco 3951", "Cisco 6901", "Cisco 6911", "Cisco 6921", "Cisco 6941", "Cisco 6945", "Cisco 6961", "Cisco 7811", "Cisco 7821", "Cisco 7832", "Cisco 7841", "Cisco 7861", "Cisco 7902", "Cisco 7905", "Cisco 7906", "Cisco 7910", "Cisco 7911", "Cisco 7912", "Cisco 7920", "Cisco 7921", "Cisco 7925", "Cisco 7926", "Cisco 7931", "Cisco 7935", "Cisco 7936", "Cisco 7937", "Cisco 7940", "Cisco 7941", "Cisco 7941G-GE", "Cisco 7942", "Cisco 7945", "Cisco 7960", "Cisco 7961", "Cisco 7961G-GE", "Cisco 7962", "Cisco 7965", "Cisco 7970", "Cisco 7971", "Cisco 7975", "Cisco 7985", "Cisco 860", "Cisco 881", "Cisco 8811", "Cisco 8821", "Cisco 8831", "Cisco 8832", "Cisco 8832NR", "Cisco 8841", "Cisco 8845", "Cisco 8851", "Cisco 8851NR", "Cisco 8861", "Cisco 8865", "Cisco 8865NR", "Cisco 888/887/886", "Cisco 8941", "Cisco 8945", "Cisco 8961", "Cisco 9951", "Cisco 9971", "Cisco ATA 186", "Cisco ATA 187", "Cisco ATA 190", "Cisco ATA 191", "Cisco C8200/L-1N-4T", "Cisco C8300-1N1S-4T2X", "Cisco C8300-1N1S-6T", "Cisco C8300-2N2S-4T2X/6T", "Cisco Catalyst 4000 Access Gateway Module", "Cisco Catalyst 4224 Voice Gateway Switch", "Cisco Catalyst 6000 12 port FXO Gateway", "Cisco Catalyst 6000 24 port FXS Gateway", "Cisco Catalyst 6000 E1 VoIP Gateway", "Cisco Catalyst 6000 T1 VoIP Gateway", "Cisco Cius", "Cisco Cius SP", "Cisco Collaboration Mobile Convergence", "Cisco Conference Bridge (WS-SVC-CMM)", "Cisco Conference Bridge Hardware", "Cisco Conference Bridge Software", "Cisco DX650", "Cisco DX70", "Cisco DX80", "Cisco Dual Mode for Android", "Cisco Dual Mode for iPhone", "Cisco E20", "Cisco ENCS 5400 ISRV", "Cisco IOS Conference Bridge", "Cisco IOS Enhanced Conference Bridge", "Cisco IOS Enhanced Media Termination Point", "Cisco IOS Enhanced Software Media Termination Point", "Cisco IOS Guaranteed Audio Video Conference Bridge", "Cisco IOS Heterogeneous Video Conference Bridge", "Cisco IOS Homogeneous Video Conference Bridge", "Cisco IOS Media Termination Point", "Cisco IP Communicator", "Cisco ISR 4321", "Cisco ISR 4331", "Cisco ISR 4351", "Cisco ISR 4431", "Cisco ISR 4451", "Cisco ISR 4461", "Cisco Jabber for Tablet", "Cisco MGCP BRI Port", "Cisco MGCP E1 Port", "Cisco MGCP FXO Port", "Cisco MGCP FXS Port", "Cisco MGCP T1 Port", "Cisco Media Server (WS-SVC-CMM-MS)", "Cisco Media Termination Point (WS-SVC-CMM)", "Cisco Media Termination Point Hardware", "Cisco Media Termination Point Software", "Cisco Meeting Server", "Cisco SIP FXS Port", "Cisco Spark Remote Device", "Cisco TelePresence", "Cisco TelePresence 1000", "Cisco TelePresence 1100", "Cisco TelePresence 1300-47", "Cisco TelePresence 1300-65", "Cisco TelePresence 200", "Cisco TelePresence 3000", "Cisco TelePresence 3200", "Cisco TelePresence 400", "Cisco TelePresence 500-32", "Cisco TelePresence 500-37", "Cisco TelePresence Codec C40", "Cisco TelePresence Codec C60", "Cisco TelePresence Codec C90", "Cisco TelePresence Conductor", "Cisco TelePresence DX70", "Cisco TelePresence EX60", "Cisco TelePresence EX90", "Cisco TelePresence Exchange System", "Cisco TelePresence IX5000", "Cisco TelePresence MCU", "Cisco TelePresence MX200", "Cisco TelePresence MX200 G2", "Cisco TelePresence MX300", "Cisco TelePresence MX300 G2", "Cisco TelePresence MX700", "Cisco TelePresence MX800", "Cisco TelePresence MX800 Dual", "Cisco TelePresence Profile 42 (C20)", "Cisco TelePresence Profile 42 (C40)", "Cisco TelePresence Profile 42 (C60)", "Cisco TelePresence Profile 52 (C40)", "Cisco TelePresence Profile 52 (C60)", "Cisco TelePresence Profile 52 Dual (C60)", "Cisco TelePresence Profile 65 (C60)", "Cisco TelePresence Profile 65 Dual (C90)", "Cisco TelePresence Quick Set C20", "Cisco TelePresence SX10", "Cisco TelePresence SX20", "Cisco TelePresence SX80", "Cisco TelePresence TX1310-65", "Cisco TelePresence TX9000", "Cisco TelePresence TX9200", "Cisco Unified Client Services Framework", "Cisco Unified Communications for RTX", "Cisco Unified Mobile Communicator", "Cisco Unified Personal Communicator", "Cisco VG200", "Cisco VG248 Gateway", "Cisco VGC Phone", "Cisco VGC Virtual Phone", "Cisco VGD-1T3", "Cisco VXC 6215", "Cisco Video Conference Bridge(IPVC-35xx)", "Cisco Voice Mail Port", "Cisco Webex Board 55", "Cisco Webex Board 70", "Cisco Webex Board 85", "Cisco Webex DX80", "Cisco Webex Desk LE", "Cisco Webex Desk Pro", "Cisco Webex Room 55", "Cisco Webex Room 55 Dual", "Cisco Webex Room 70 Dual", "Cisco Webex Room 70 Dual G2", "Cisco Webex Room 70 Panorama", "Cisco Webex Room 70 Single", "Cisco Webex Room 70 Single G2", "Cisco Webex Room Kit", "Cisco Webex Room Kit Mini", "Cisco Webex Room Kit Plus", "Cisco Webex Room Kit Pro", "Cisco Webex Room Panorama", "Cisco Webex Room Phone", "Cisco Webex VDI Svc Framework", "Communication Media Module", "EMCC Base Phone", "FLEX_SLOT", "Gatekeeper", "Generic Desktop Video Endpoint", "Generic Multiple Screen Room System", "Generic Single Screen Room System", "H.225 Trunk (Gatekeeper Controlled)", "H.323 Client", "H.323 Gateway", "Hunt List", "IAD2400_ANALOG", "IAD2400_DIGITAL", "IMS-integrated Mobile (Basic)", "IP-STE", "ISDN BRI Phone", "Inter-Cluster Trunk (Gatekeeper Controlled)", "Inter-Cluster Trunk (Non-Gatekeeper Controlled)", "Interactive Voice Response", "Load Simulator", "Motorola CN622", "Music On Hold", "NM-1V", "NM-2V", "NM-4VWIC-MBRD", "NM-HD-1V", "NM-HD-2V", "NM-HD-2VE", "NM-HDA", "NM-HDV", "NM-HDV2-0PORT", "NM-HDV2-1PORT", "NM-HDV2-2PORT", "Nokia S60", "PA-MCX", "PA-VXA", "PA-VXB", "PA-VXC", "Pilot", "Remote Destination Profile", "Route List", "SCCP Device", "SCCP gateway virtual phone", "SIP Trunk", "SIP WSM Connection", "SPA8800", "Third-party AS-SIP Endpoint", "Third-party SIP Device (Advanced)", "Third-party SIP Device (Basic)", "Transnova S3", "Universal Device Template", "Unknown", "VG202", "VG204", "VG224", "VG310", "VG320", "VG350", "VG400", "VG420", "VG450", "VGC Port", "VIC_SLOT", "VKEM 36-Button Line Expansion Module", "VNM-HDA", "VWIC_SLOT", "WS-SVC-CMM-MS", "WS-X6600"]
			Calling Party Number Prefix									Field Name: Endpoints.[n].endpoint.callingPartyNumberPrefix Type: String Cardinality: [0..1] MaxLength: 16
			Always Use Prime Line For VM *								Default: Default	Field Name: Endpoints.[n].endpoint.alwaysUsePrimeLineForVM Type: String Cardinality: [1..1] Default: Default Choices: ["Off", "On", "Default"]
			Description								Optional description of the device	Field Name: Endpoints.[n].endpoint.description Type: String Cardinality: [0..1] MaxLength: 128
			Use Device Pool Cgpn Transform Css Unknown								Default: True	Field Name: Endpoints.[n].endpoint.useDevicePoolCgpnTransformCssUnknown Type: Boolean Cardinality: [0..1] Default: True
			Ignore Presentation Indicators								Applicable only for SCCP	Field Name: Endpoints.[n].endpoint.ignorePresentationIndicators Type: Boolean
			Subscribe Calling Search Space Name								Applicable only for SCCP	Field Name: Endpoints.[n].endpoint.subscribeCallingSearchSpaceName Type: String Target: device/cucm/Css Target attr: name Cardinality: [1..1] Format: uri
			User Locale									Field Name: Endpoints.[n].endpoint.userLocale Type: ["String", "Null"] Target: device/cucm/UserLocale Target attr: name Cardinality: [0..1] Format: uri Choices: ["English United States"]
			Use Device Pool Cdpn Transform Css								Default: True	Field Name: Endpoints.[n].endpoint.useDevicePoolCdpnTransformCss Type: Boolean Cardinality: [0..1] Default: True
			Geo Location Name									Field Name: Endpoints.[n].endpoint.geoLocationName Type: ["String", "Null"] Target: device/cucm/GeoLocation Target attr: name Cardinality: [0..1] Format: uri
			Device Mobility Mode *								Default: Default	Field Name: Endpoints.[n].endpoint.deviceMobilityMode Type: String Cardinality: [1..1] Default: Default Choices: ["Off", "On", "Default"]
			Preemption								This setting only affects devices that support MLPP. Default: Default	Field Name: Endpoints.[n].endpoint.preemption Type: String Cardinality: [0..1] Default: Default Choices: ["Disabled", "Forceful", "Default"]
			Hlog Status								Applicable only for SCCP	Field Name: Endpoints.[n].endpoint.hlogStatus Type: Boolean Cardinality: [0..1]
			Cdpn Transformation Css Name									Field Name: Endpoints.[n].endpoint.cdpnTransformationCssName Type: ["String", "Null"] Target: device/cucm/Css Target attr: name Cardinality: [0..1] Format: uri
			Class *								Class ID string. Class information is read-only except when creating a device.	Field Name: Endpoints.[n].endpoint.class Type: String Cardinality: [1..1] Choices: ["Phone", "Gateway", "Conference Bridge", "Media Termination Point", "Route List", "Voice Mail", "CTI Route Point", "Music On Hold", "Simulation", "Pilot", "GateKeeper", "Add-on modules", "Hidden Phone", "Trunk", "Tone Announcement Player", "Remote Destination Profile", "EMCC Base Phone Template", "EMCC Base Phone", "Remote Destination Profile Template", "Gateway Template", "UDP Template", "Phone Template", "Device Profile", "Invalid", "Interactive Voice Response"]
			Hotline Device								This tag is applicable for MGCP FXS ports,which supports PLAR.	Field Name: Endpoints.[n].endpoint.hotlineDevice Type: Boolean Cardinality: [0..1]
			Security Profile Name *									Field Name: Endpoints.[n].endpoint.securityProfileName Type: String Target: device/cucm/PhoneSecurityProfile Target attr: name Cardinality: [1..1] Format: uri
			Presence Group Name *								Applicable only for SCCP	Field Name: Endpoints.[n].endpoint.presenceGroupName Type: String Target: device/cucm/PresenceGroup Target attr: name Cardinality: [1..1] Format: uri
			Name *								The device name,using only URL-friendly characters	Field Name: Endpoints.[n].endpoint.name Type: String Cardinality: [1..1] MaxLength: 128
			Retry Video Call As Audio								Default: True	Field Name: Endpoints.[n].endpoint.retryVideoCallAsAudio Type: Boolean Cardinality: [0..1] Default: True
			Protocol Side *								Side information is read-only except when creating a device Default: User	Field Name: Endpoints.[n].endpoint.protocolSide Type: String Cardinality: [1..1] Default: User Choices: ["Network", "User"]
			Common Phone Config Name *									Field Name: Endpoints.[n].endpoint.commonPhoneConfigName Type: String Target: device/cucm/CommonPhoneConfig Target attr: name Cardinality: [1..1] Format: uri
			Mlpp Domain Id								This setting only effects devices that support MLPP. Use -1 to set to null	Field Name: Endpoints.[n].endpoint.mlppDomainId Type: ["String", "Null"] Cardinality: [0..1] MaxLength: 128
			Remote Device								Applicable only for SCCP	Field Name: Endpoints.[n].endpoint.remoteDevice Type: Boolean Cardinality: [0..1]
			Aar Neighborhood Name									Field Name: Endpoints.[n].endpoint.aarNeighborhoodName Type: ["String", "Null"] Target: device/cucm/AarGroup Target attr: name Cardinality: [0..1] Format: uri
			Location Name *									Field Name: Endpoints.[n].endpoint.locationName Type: String Target: device/cucm/Location Target attr: name Cardinality: [1..1] Format: uri
			Transmit Utf8									Field Name: Endpoints.[n].endpoint.transmitUtf8 Type: Boolean Cardinality: [0..1]
			Cgpn Transformation Css Name									Field Name: Endpoints.[n].endpoint.cgpnTransformationCssName Type: ["String", "Null"] Target: device/cucm/Css Target attr: name Cardinality: [0..1] Format: uri
			Automated Alternate Routing Css Name									Field Name: Endpoints.[n].endpoint.automatedAlternateRoutingCssName Type: ["String", "Null"] Target: device/cucm/Css Target attr: name Cardinality: [0..1] Format: uri
			Device Pool Name *									Field Name: Endpoints.[n].endpoint.devicePoolName Type: String Target: device/cucm/DevicePool Target attr: name Cardinality: [1..1] Format: uri
			Model								Model ID string. Read Only	Field Name: Endpoints.[n].endpoint.model Type: String Cardinality: [0..1] Choices: ["Cisco 30 SP+", "Cisco 12 SP+", "Cisco 12 SP", "Cisco 12 S", "Cisco 30 VIP", "Cisco 7910", "Cisco 7960", "Cisco 7940", "Cisco 7935", "Cisco VGC Phone", "Cisco VGC Virtual Phone", "Cisco ATA 186", "EMCC Base Phone", "SCCP Phone", "Analog Access", "Digital Access", "Digital Access+", "Digital Access WS-X6608", "Analog Access WS-X6624", "VGC Gateway", "Conference Bridge", "Conference Bridge WS-X6608", "Cisco IOS Conference Bridge (HDV2)", "Cisco Conference Bridge (WS-SVC-CMM)", "H.323 Phone", "H.323 Gateway", "Music On Hold", "Device Pilot", "CTI Port", "CTI Route Point", "Voice Mail Port", "Cisco IOS Software Media Termination Point (HDV2)", "Cisco Media Server (WS-SVC-CMM-MS)", "Cisco Video Conference Bridge (IPVC-35xx)", "Cisco IOS Heterogeneous Video Conference Bridge", "Cisco IOS Guaranteed Audio Video Conference Bridge", "Cisco IOS Homogeneous Video Conference Bridge", "Route List", "Load Simulator", "Media Termination Point", "Media Termination Point Hardware", "Cisco IOS Media Termination Point (HDV2)", "Cisco Media Termination Point (WS-SVC-CMM)", "Cisco 7941", "Cisco 7971", "MGCP Station", "MGCP Trunk", "GateKeeper", "7914 14-Button Line Expansion Module", "Trunk", "Tone Announcement Player", "SIP Trunk", "SIP Gateway", "WSM Trunk", "Remote Destination Profile", "7915 12-Button Line Expansion Module", "7915 24-Button Line Expansion Module", "7916 12-Button Line Expansion Module", "7916 24-Button Line Expansion Module", "CKEM 36-Button Line Expansion Module", "SPA8800", "Unknown MGCP Gateway", "Unknown", "Cisco 7985", "Cisco 7911", "Cisco 7961G-GE", "Cisco 7941G-GE", "Motorola CN622", "Third-party SIP Device (Basic)", "Cisco 7931", "Cisco Unified Personal Communicator", "Cisco 7921", "Cisco 7906", "Third-party SIP Device (Advanced)", "Cisco TelePresence", "Nokia S60", "Cisco 7962", "Cisco 3951", "Cisco 7937", "Cisco 7942", "Cisco 7945", "Cisco 7965", "Cisco 7975", "Cisco 3911", "Cisco Unified Mobile Communicator", "Cisco TelePresence 1000", "Cisco TelePresence 3000", "Cisco TelePresence 3200", "Cisco TelePresence 500-37", "Cisco 7925", "Cisco 9971", "Cisco 6921", "Cisco 6941", "Cisco 6961", "Cisco Unified Client Services Framework", "Cisco TelePresence 1300-65", "Cisco TelePresence 1100", "Transnova S3", "BlackBerry MVS VoWifi", "Cisco 9951", "Cisco 8961", "Cisco 6901", "Cisco 6911", "Cisco ATA 187", "Cisco TelePresence 200", "Cisco TelePresence 400", "Cisco Dual Mode for iPhone", "Cisco 6945", "Cisco Dual Mode for Android", "Cisco 7926", "Cisco E20", "Generic Single Screen Room System", "Generic Multiple Screen Room System", "Cisco TelePresence EX90", "Cisco 8945", "Cisco 8941", "Generic Desktop Video Endpoint", "Cisco TelePresence 500-32", "Cisco TelePresence 1300-47", "Cisco 3905", "Cisco Cius", "VKEM 36-Button Line Expansion Module", "Cisco TelePresence TX1310-65", "Cisco TelePresence MCU", "Ascom IP-DECT Device", "Cisco TelePresence Exchange System", "Cisco TelePresence EX60", "Cisco TelePresence Codec C90", "Cisco TelePresence Codec C60", "Cisco TelePresence Codec C40", "Cisco TelePresence Quick Set C20", "Cisco TelePresence Profile 42 (C20)", "Cisco TelePresence Profile 42 (C60)", "Cisco TelePresence Profile 52 (C40)", "Cisco TelePresence Profile 52 (C60)", "Cisco TelePresence Profile 52 Dual (C60)", "Cisco TelePresence Profile 65 (C60)", "Cisco TelePresence Profile 65 Dual (C90)", "Cisco TelePresence MX200", "Cisco TelePresence TX9000", "Cisco TelePresence TX9200", "Cisco 7821", "Cisco 7841", "Cisco 7861", "Cisco TelePresence SX20", "Cisco TelePresence MX300", "IMS-integrated Mobile (Basic)", "Third-party AS-SIP Endpoint", "Cisco Cius SP", "Cisco TelePresence Profile 42 (C40)", "Cisco VXC 6215", "CTI Remote Device", "Usage Profile", "Carrier-integrated Mobile", "Universal Device Template", "Cisco DX650", "Cisco Unified Communications for RTX", "Cisco Jabber for Tablet", "Cisco 8831", "Cisco ATA 190", "Cisco TelePresence SX10", "Cisco 8841", "Cisco 8851", "Cisco 8861", "Cisco TelePresence SX80", "Cisco TelePresence MX200 G2", "Cisco TelePresence MX300 G2", "Cisco 7905", "Cisco 7920", "Cisco 7970", "Cisco 7912", "Cisco 7902", "Cisco IP Communicator", "Cisco 7961", "Cisco 7936", "Analog Phone", "ISDN BRI Phone", "SCCP gateway virtual phone", "IP-STE", "Cisco TelePresence Conductor", "Cisco DX80", "Cisco DX70", "BEKEM 36-Button Line Expansion Module", "Cisco TelePresence MX700", "Cisco TelePresence MX800", "Cisco TelePresence IX5000", "Cisco 7811", "Cisco 8821", "Cisco 8811", "Interactive Voice Response", "Cisco 8845", "Cisco 8865", "Cisco TelePresence MX800 Dual", "Cisco 8851NR", "Cisco Spark Remote Device", "Cisco Webex DX80", "Cisco TelePresence DX70", "Cisco 7832", "Cisco 8865NR", "Cisco Meeting Server", "Cisco Webex Room Kit", "Cisco Webex Room 55", "Cisco Webex Room Kit Plus", "CP-8800-Video 28-Button Key Expansion Module", "CP-8800-Audio 28-Button Key Expansion Module", "Cisco 8832", "Cisco Webex Room 70 Single", "Cisco 8832NR", "Cisco ATA 191", "Cisco Collaboration Mobile Convergence", "Cisco Webex Room 70 Dual", "Cisco Webex Room Kit Pro", "Cisco Webex Room 55 Dual", "Cisco Webex Room 70 Single G2", "Cisco Webex Room 70 Dual G2", "SIP Station", "Cisco Webex Room Kit Mini", "Cisco Webex VDI Svc Framework", "Cisco Webex Board 55", "Cisco Webex Board 70", "Cisco Webex Board 85", "Cisco Webex Desk Pro", "Cisco Webex Room Panorama", "Cisco Webex Room 70 Panorama", "Cisco Webex Room Phone", "Cisco 860", "Cisco Webex Desk LE"]
			Ime E164Transformation Name									Field Name: Endpoints.[n].endpoint.imeE164TransformationName Type: ["String", "Null"] Target: device/cucm/ImeE164Transformation Target attr: name Cardinality: [0..1] Format: uri
			Lines									Field Name: lines Type: Object Cardinality: [0..1]
					Line						An XLine is an entry in the DeviceNumPlanMap table. The actual directory number is referenced inside the XLine object by the "dirn" or "dirnId" element. Not applicable to FXO ports	Field Name: line.[n] Type: Array Cardinality: [0..1]
						Display Ascii						Field Name: Endpoints.[n].endpoint.lines.line.[n].displayAscii Type: String Cardinality: [0..1] MaxLength: 50
						Associated Endusers						Field Name: associatedEndusers Type: ["Object", "Null"] Cardinality: [0..1]
								Enduser				Field Name: enduser.[n] Type: Array
									User Id *			Field Name: Endpoints.[n].endpoint.lines.line.[n].associatedEndusers.enduser.[n].userId Type: ["String", "Null"] Target: device/cucm/User Target attr: userid Cardinality: [1..1] Format: uri
						Ring Setting					Default: Ring	Field Name: Endpoints.[n].endpoint.lines.line.[n].ringSetting Type: String Cardinality: [0..1] Default: Ring Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
						Consecutive Ring Setting					Consecutive Rings Setting. Replaces the consective ring setting on IPPhone. Default: Use System Default	Field Name: Endpoints.[n].endpoint.lines.line.[n].consecutiveRingSetting Type: ["String", "Null"] Cardinality: [0..1] Default: Use System Default Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
						Recording Profile Name						Field Name: Endpoints.[n].endpoint.lines.line.[n].recordingProfileName Type: ["String", "Null"] Cardinality: [0..1]
						Index						Field Name: Endpoints.[n].endpoint.lines.line.[n].index Type: Integer Cardinality: [1..1]
						Ring Setting Active Pickup Alert					Applicable only for IP Phones Default: Use System Default	Field Name: Endpoints.[n].endpoint.lines.line.[n].ringSettingActivePickupAlert Type: ["String", "Null"] Cardinality: [0..1] Default: Use System Default Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
						Label						Field Name: Endpoints.[n].endpoint.lines.line.[n].label Type: String Cardinality: [0..1] MaxLength: 50
						Recording Media Source					Default: Gateway Preferred	Field Name: Endpoints.[n].endpoint.lines.line.[n].recordingMediaSource Type: String Cardinality: [0..1] Default: Gateway Preferred Choices: ["Gateway Preferred", "Phone Preferred"]
						Max Num Calls					Default: 2	Field Name: Endpoints.[n].endpoint.lines.line.[n].maxNumCalls Type: Integer Cardinality: [0..1] Default: 2
						Partition Usage					This tag cannot be modified. It can only be specified in the add request. Default: General	Field Name: Endpoints.[n].endpoint.lines.line.[n].partitionUsage Type: String Cardinality: [0..1] Default: General Choices: ["Intercom", "Call Control Discovery Learned Pattern", "General", "Directory URI"]
						Recording Flag					Default: Call Recording Disabled	Field Name: Endpoints.[n].endpoint.lines.line.[n].recordingFlag Type: String Cardinality: [0..1] Default: Call Recording Disabled Choices: ["Call Recording Disabled", "Automatic Call Recording Enabled", "Selective Call Recording Enabled"]
						Speed Dial						Field Name: Endpoints.[n].endpoint.lines.line.[n].speedDial Type: ["String", "Null"] Cardinality: [0..1]
						Monitoring Css Name						Field Name: Endpoints.[n].endpoint.lines.line.[n].monitoringCssName Type: ["String", "Null"] Cardinality: [0..1]
						E164Mask						Field Name: Endpoints.[n].endpoint.lines.line.[n].e164Mask Type: ["String", "Null"] Cardinality: [0..1] MaxLength: 255
						Missed Call Logging					Default: True	Field Name: Endpoints.[n].endpoint.lines.line.[n].missedCallLogging Type: Boolean Cardinality: [0..1] Default: True
						Call Info Display						Field Name: callInfoDisplay Type: ["Object", "Null"] Cardinality: [0..1]
							Dialed Number				Default: True	Field Name: Endpoints.[n].endpoint.lines.line.[n].callInfoDisplay.dialedNumber Type: Boolean Cardinality: [0..1] Default: True
							Redirected Number					Field Name: Endpoints.[n].endpoint.lines.line.[n].callInfoDisplay.redirectedNumber Type: Boolean Cardinality: [0..1]
							Caller Number					Field Name: Endpoints.[n].endpoint.lines.line.[n].callInfoDisplay.callerNumber Type: Boolean Cardinality: [0..1]
							Caller Name				Default: True	Field Name: Endpoints.[n].endpoint.lines.line.[n].callInfoDisplay.callerName Type: Boolean Cardinality: [0..1] Default: True
						Dirn					Only uuid attribute is returned in response	Field Name: dirn Type: ["Object", "Null"] Cardinality: [1..1]
							Pattern *					Field Name: Endpoints.[n].endpoint.lines.line.[n].dirn.pattern Type: String Cardinality: [1..1]
							Route Partition Name *					Field Name: Endpoints.[n].endpoint.lines.line.[n].dirn.routePartitionName Type: ["String", "Null"] Target: device/cucm/RoutePartition Target attr: name Cardinality: [1..1] Format: uri
						Mwl Policy					Default: Use System Policy	Field Name: Endpoints.[n].endpoint.lines.line.[n].mwlPolicy Type: String Cardinality: [0..1] Default: Use System Policy Choices: ["Use System Policy", "Light and Prompt", "Prompt Only", "Light Only", "None"]
						Ring Setting Idle Pickup Alert					Applicable only for IP Phones Default: Use System Default	Field Name: Endpoints.[n].endpoint.lines.line.[n].ringSettingIdlePickupAlert Type: ["String", "Null"] Cardinality: [0..1] Default: Use System Default Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
						Busy Trigger					Default: 1	Field Name: Endpoints.[n].endpoint.lines.line.[n].busyTrigger Type: Integer Cardinality: [0..1] Default: 1
						Audible Mwi					Not applicable for gatewayEndpointAnalogAccess and CiscoCatalyst600024PortFXSGateway Default: Default	Field Name: Endpoints.[n].endpoint.lines.line.[n].audibleMwi Type: String Cardinality: [0..1] Default: Default Choices: ["Off", "On", "Default"]
						Display						Field Name: Endpoints.[n].endpoint.lines.line.[n].display Type: String Cardinality: [0..1] MaxLength: 50
		Unit *										Field Name: Endpoints.[n].unit Type: Integer Cardinality: [1..1]
		Domain Name										Field Name: Endpoints.[n].domainName Type: String Cardinality: [0..1]
Gateway Dat												Field Name: GatewayDAT Type: Object
	Domain Name *										Domain Name	Field Name: GatewayDAT.domainName Type: String MaxLength: 1024
	IOS Device *										IOS Device	Field Name: GatewayDAT.iosDevice Type: String Target: data/HcsIOSDeviceDAT Target attr: name MaxLength: 512 Format: uri
	Product											Field Name: GatewayDAT.product Type: String MaxLength: 1024
	Protocol											Field Name: GatewayDAT.protocol Type: String MaxLength: 1024
	CCM Group											Field Name: GatewayDAT.ccmGroup Type: String MaxLength: 1024
	Description											Field Name: GatewayDAT.description Type: String MaxLength: 1024
	Enable Command Builder										Generate IOS Commands for this gateway and ports Default: true	Field Name: GatewayDAT.generateIOSCommands Type: Boolean Default: true
	Gateway Network Interface											Field Name: GatewayDAT.networkInterface Type: String MaxLength: 1024 Choices: ["FastEthernet0/0", "FastEthernet0/1", "GigabitEthernet0/0", "GigabitEthernet0/1", "GigabitEthernet0/2"]
	Call Disconnect Timeout											Field Name: GatewayDAT.disconnectTimeout Type: Integer
	CP Tone											Field Name: GatewayDAT.cpTone Type: String MaxLength: 1024 Choices: ["ar", "au", "at", "be", "br", "ca", "cn", "co", "cz", "dk", "de", "eg", "fi", "fr", "gh", "gb", "gr", "hk", "hu", "is", "in", "id", "ie", "il", "it", "jp", "jo", "ke", "kr", "lb", "lu", "my", "mx", "np", "nl", "nz", "ng", "no", "pk", "pa", "pe", "ph", "pl", "pt", "ru", "sa", "sg", "sk", "si", "za", "es", "se", "ch", "tw", "th", "tr", "us", "ve", "zw"]
	Signal											Field Name: GatewayDAT.signal Type: String MaxLength: 1024 Choices: ["loop-start", "ground-start"]
	M Endpoints											Field Name: mEndpoints.[n] Type: Array
		Subunit *										Field Name: mEndpoints.[n].subunit Type: ["Integer", "Null"] Cardinality: [1..1]
		Endpoint										Field Name: endpoint Type: ["Object", "Null"] Cardinality: [1..1]
			Protocol *								Protocol option is read-only,except when creating a device.	Field Name: mEndpoints.[n].endpoint.protocol Type: String Cardinality: [1..1] Choices: ["SCCP", "Digital Access PRI", "H.225", "Analog Access", "Digital Access T1", "Route Point", "Unicast Bridge", "Multicast Point", "Inter-Cluster Trunk", "RAS", "Digital Access BRI", "SIP", "MGCP", "Static SIP Mobile Subscriber", "SIP Connector", "Remote Destination", "Mobile Smart Client", "Digital Access E1 R2", "CTI Remote Device", "Protocol Not Specified"]
			Geo Location Filter Name									Field Name: mEndpoints.[n].endpoint.geoLocationFilterName Type: ["String", "Null"] Cardinality: [0..1]
			Calling Party Strip Digits									Field Name: mEndpoints.[n].endpoint.callingPartyStripDigits Type: ["Integer", "Null"] Cardinality: [0..1]
				Vendor Config								Field Name: vendorConfig.[n] Type: Array
					Value							Field Name: mEndpoints.[n].endpoint.vendorConfig.[n].value Type: Any
					Key							Field Name: mEndpoints.[n].endpoint.vendorConfig.[n].key Type: String
			Calling Party Unknown Transformation Css Name									Field Name: mEndpoints.[n].endpoint.callingPartyUnknownTransformationCssName Type: ["String", "Null"] Cardinality: [0..1]
			Calling Search Space Name									Field Name: mEndpoints.[n].endpoint.callingSearchSpaceName Type: ["String", "Null"] Target: device/cucm/Css Target attr: name Cardinality: [0..1] Format: uri
			Index *									Field Name: mEndpoints.[n].endpoint.index Type: Integer Cardinality: [1..1]
			Packet Capture Duration									Field Name: mEndpoints.[n].endpoint.packetCaptureDuration Type: ["Integer", "Null"] Cardinality: [0..1]
			Use Trusted Relay Point								Default: Default	Field Name: mEndpoints.[n].endpoint.useTrustedRelayPoint Type: String Cardinality: [0..1] Default: Default Choices: ["Off", "On", "Default"]
			Port									Field Name: port Type: ["Object", "Null"] Cardinality: [1..1]
				Trunk Level								Field Name: mEndpoints.[n].endpoint.port.trunkLevel Type: String Cardinality: [0..1] Choices: ["AAL(A)", "AAL(D)", "A/TT", "DAL", "ICS", "ISD/TT", "IST", "ONS", "OPS", "S/ATT", "S/DTT", "A/TO"]
					Vendor Config						Arbitrary XML defined by 3rd party vendors.	Field Name: vendorConfig.[n] Type: Array
						Value						Field Name: mEndpoints.[n].endpoint.port.vendorConfig.[n].value Type: Any
						Key						Field Name: mEndpoints.[n].endpoint.port.vendorConfig.[n].key Type: String
				Timer4 *								Field Name: mEndpoints.[n].endpoint.port.timer4 Type: Integer Cardinality: [1..1]
				Prefix Dn								Field Name: mEndpoints.[n].endpoint.port.prefixDn Type: ["String", "Null"] Cardinality: [0..1] MaxLength: 255
				Start Dial Protocol							Default: Not Set	Field Name: mEndpoints.[n].endpoint.port.startDialProtocol Type: String Cardinality: [0..1] Default: Not Set Choices: ["Not Set", "Immediate", "Wink Start Feature Group B", "Delay Dial", "Wink Start Feature Group D"]
				Port Number *								Field Name: mEndpoints.[n].endpoint.port.portNumber Type: Integer Cardinality: [1..1]
				Silence Suppression Threshold								Field Name: mEndpoints.[n].endpoint.port.silenceSuppressionThreshold Type: String Cardinality: [0..1] Choices: ["Disable", "-48dbm0", "-45dbm0", "-42dbm0", "-39dbm0", "-36dbm0", "-33dbm0", "-30dbm0"]
				Sig Digits *							The value for sigDigits must be between 0 to 32. enable attribute is read only.	Field Name: mEndpoints.[n].endpoint.port.sigDigits Type: Integer Cardinality: [1..1]
				Caller Id Dn								Field Name: mEndpoints.[n].endpoint.port.callerIdDn Type: ["String", "Null"] Cardinality: [0..1] MaxLength: 255
				Timer6 *								Field Name: mEndpoints.[n].endpoint.port.timer6 Type: Integer Cardinality: [1..1]
				Timer5 *								Field Name: mEndpoints.[n].endpoint.port.timer5 Type: Integer Cardinality: [1..1]
				Calling Party Selection								Field Name: mEndpoints.[n].endpoint.port.callingPartySelection Type: String Cardinality: [0..1] Choices: ["Originator", "First Redirect Number", "Last Redirect Number", "First Redirect Number (External)", "Last Redirect Number (External)"]
				Timer3 *								Field Name: mEndpoints.[n].endpoint.port.timer3 Type: Integer Cardinality: [1..1]
				Timer2 *								Field Name: mEndpoints.[n].endpoint.port.timer2 Type: Integer Cardinality: [1..1]
				Timer1 *								Field Name: mEndpoints.[n].endpoint.port.timer1 Type: Integer Cardinality: [1..1]
				Expected Digits *								Field Name: mEndpoints.[n].endpoint.port.expectedDigits Type: Integer Cardinality: [1..1]
				Digit Sending							Default: DTMF	Field Name: mEndpoints.[n].endpoint.port.digitSending Type: String Cardinality: [0..1] Default: DTMF Choices: ["DTMF", "MF", "PULSE"]
				Smdi Port Number *							Not used by T1 Ports	Field Name: mEndpoints.[n].endpoint.port.smdiPortNumber Type: Integer Cardinality: [1..1]
				Attendant Dn							Mandatory for ground start and loop start	Field Name: mEndpoints.[n].endpoint.port.attendantDn Type: String Cardinality: [0..1] MaxLength: 255
				Trunk								Field Name: mEndpoints.[n].endpoint.port.trunk Type: String Cardinality: [0..1] Choices: ["Ground Start", "Loop Start", "DID", "POTS", "EANDM"]
				Presentation Bit								Field Name: mEndpoints.[n].endpoint.port.presentationBit Type: String Cardinality: [0..1] Choices: ["Default", "Allowed", "Restricted"]
				Lines								Field Name: lines Type: Object Cardinality: [0..1]
						Line					An XLine is an entry in the DeviceNumPlanMap table. The actual directory number is referenced inside the XLine object by the "dirn" or "dirnId" element. Not applicable to FXO ports	Field Name: line.[n] Type: Array Cardinality: [0..1]
							Display Ascii					Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].displayAscii Type: String Cardinality: [0..1] MaxLength: 50
							Associated Endusers					Field Name: associatedEndusers Type: ["Object", "Null"] Cardinality: [0..1]
									Enduser			Field Name: enduser.[n] Type: Array
										User Id *		Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].associatedEndusers.enduser.[n].userId Type: ["String", "Null"] Target: device/cucm/User Target attr: userid Cardinality: [1..1] Format: uri
							Ring Setting				Default: Ring	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].ringSetting Type: String Cardinality: [0..1] Default: Ring Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
							Consecutive Ring Setting				Consecutive Rings Setting. Replaces the consective ring setting on IPPhone. Default: Use System Default	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].consecutiveRingSetting Type: ["String", "Null"] Cardinality: [0..1] Default: Use System Default Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
							Recording Profile Name					Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].recordingProfileName Type: ["String", "Null"] Cardinality: [0..1]
							Index					Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].index Type: Integer Cardinality: [1..1]
							Ring Setting Active Pickup Alert				Applicable only for IP Phones Default: Use System Default	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].ringSettingActivePickupAlert Type: ["String", "Null"] Cardinality: [0..1] Default: Use System Default Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
							Label					Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].label Type: String Cardinality: [0..1] MaxLength: 50
							Recording Media Source				Default: Gateway Preferred	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].recordingMediaSource Type: String Cardinality: [0..1] Default: Gateway Preferred Choices: ["Gateway Preferred", "Phone Preferred"]
							Max Num Calls				Default: 2	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].maxNumCalls Type: Integer Cardinality: [0..1] Default: 2
							Partition Usage				This tag cannot be modified. It can only be specified in the add request. Default: General	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].partitionUsage Type: String Cardinality: [0..1] Default: General Choices: ["Intercom", "Call Control Discovery Learned Pattern", "General", "Directory URI"]
							Recording Flag				Default: Call Recording Disabled	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].recordingFlag Type: String Cardinality: [0..1] Default: Call Recording Disabled Choices: ["Call Recording Disabled", "Automatic Call Recording Enabled", "Selective Call Recording Enabled"]
							Speed Dial					Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].speedDial Type: ["String", "Null"] Cardinality: [0..1]
							Monitoring Css Name					Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].monitoringCssName Type: ["String", "Null"] Cardinality: [0..1]
							E164Mask					Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].e164Mask Type: ["String", "Null"] Cardinality: [0..1] MaxLength: 255
							Missed Call Logging				Default: True	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].missedCallLogging Type: Boolean Cardinality: [0..1] Default: True
							Call Info Display					Field Name: callInfoDisplay Type: ["Object", "Null"] Cardinality: [0..1]
								Dialed Number			Default: True	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].callInfoDisplay.dialedNumber Type: Boolean Cardinality: [0..1] Default: True
								Redirected Number				Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].callInfoDisplay.redirectedNumber Type: Boolean Cardinality: [0..1]
								Caller Number				Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].callInfoDisplay.callerNumber Type: Boolean Cardinality: [0..1]
								Caller Name			Default: True	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].callInfoDisplay.callerName Type: Boolean Cardinality: [0..1] Default: True
							Dirn				Only uuid attribute is returned in response	Field Name: dirn Type: ["Object", "Null"] Cardinality: [1..1]
								Pattern *				Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].dirn.pattern Type: String Cardinality: [1..1]
								Route Partition Name *				Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].dirn.routePartitionName Type: ["String", "Null"] Target: device/cucm/RoutePartition Target attr: name Cardinality: [1..1] Format: uri
							Mwl Policy				Default: Use System Policy	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].mwlPolicy Type: String Cardinality: [0..1] Default: Use System Policy Choices: ["Use System Policy", "Light and Prompt", "Prompt Only", "Light Only", "None"]
							Ring Setting Idle Pickup Alert				Applicable only for IP Phones Default: Use System Default	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].ringSettingIdlePickupAlert Type: ["String", "Null"] Cardinality: [0..1] Default: Use System Default Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
							Busy Trigger				Default: 1	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].busyTrigger Type: Integer Cardinality: [0..1] Default: 1
							Audible Mwi				Not applicable for gatewayEndpointAnalogAccess and CiscoCatalyst600024PortFXSGateway Default: Default	Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].audibleMwi Type: String Cardinality: [0..1] Default: Default Choices: ["Off", "On", "Default"]
							Display					Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].display Type: String Cardinality: [0..1] MaxLength: 50
				Caller Id Enable *								Field Name: mEndpoints.[n].endpoint.port.callerIdEnable Type: Boolean Cardinality: [1..1]
				Unattended Port								Field Name: mEndpoints.[n].endpoint.port.unattendedPort Type: ["Boolean", "Null"] Cardinality: [0..1]
				Trunk Direction *								Field Name: mEndpoints.[n].endpoint.port.trunkDirection Type: String Cardinality: [1..1] Choices: ["Inbound", "Outbound", "Bothways"]
				Trunk Pad Tx								Field Name: mEndpoints.[n].endpoint.port.trunkPadTx Type: String Cardinality: [0..1] Choices: ["Minus32db", "Minus31db", "Minus30db", "Minus29db", "Minus28db", "Minus27db", "Minus26db", "Minus25db", "Minus24db", "Minus23db", "Minus22db", "Minus21db", "Minus20db", "Minus19db", "Minus18db", "Minus17db", "Minus16db", "Minus15db", "Minus14db", "Minus13db", "Minus12db", "Minus11db", "Minus10db", "Minus9db", "Minus8db", "Minus7db", "Minus6db", "Minus5db", "Minus4db", "Minus3db", "Minus2db", "Minus1db", "NoDbPadding", "Plus1db", "Plus2db", "Plus3db", "Plus4db", "Plus5db", "Plus6db", "Plus7db", "Plus8db", "Plus9db", "Plus10db", "Plus11db", "Plus12db", "Plus13db", "Plus14db", "Plus15db", "Plus16db", "Plus17db", "Plus18db", "Plus19db", "Plus20db", "Plus21db", "Plus22db", "Plus23db", "Plus24db", "Plus25db", "Plus26db", "Plus27db", "Plus28db", "Plus29db", "Plus30db", "Plus31db", "Plus32db"]
				Trunk Pad Rx								Field Name: mEndpoints.[n].endpoint.port.trunkPadRx Type: String Cardinality: [0..1] Choices: ["Minus32db", "Minus31db", "Minus30db", "Minus29db", "Minus28db", "Minus27db", "Minus26db", "Minus25db", "Minus24db", "Minus23db", "Minus22db", "Minus21db", "Minus20db", "Minus19db", "Minus18db", "Minus17db", "Minus16db", "Minus15db", "Minus14db", "Minus13db", "Minus12db", "Minus11db", "Minus10db", "Minus9db", "Minus8db", "Minus7db", "Minus6db", "Minus5db", "Minus4db", "Minus3db", "Minus2db", "Minus1db", "NoDbPadding", "Plus1db", "Plus2db", "Plus3db", "Plus4db", "Plus5db", "Plus6db", "Plus7db", "Plus8db", "Plus9db", "Plus10db", "Plus11db", "Plus12db", "Plus13db", "Plus14db", "Plus15db", "Plus16db", "Plus17db", "Plus18db", "Plus19db", "Plus20db", "Plus21db", "Plus22db", "Plus23db", "Plus24db", "Plus25db", "Plus26db", "Plus27db", "Plus28db", "Plus29db", "Plus30db", "Plus31db", "Plus32db"]
			Pstn Access								Default: True	Field Name: mEndpoints.[n].endpoint.pstnAccess Type: Boolean Cardinality: [0..1] Default: True
			Common Device Config Name									Field Name: mEndpoints.[n].endpoint.commonDeviceConfigName Type: ["String", "Null"] Cardinality: [0..1]
			Network Locale									Field Name: mEndpoints.[n].endpoint.networkLocale Type: ["String", "Null"] Cardinality: [0..1] Choices: ["Argentina", "Australia", "Austria", "Belgium", "Brazil", "Canada", "China", "Colombia", "Cyprus", "Czech Republic", "Denmark", "Egypt", "Finland", "France", "Germany", "Ghana", "Greece", "Hong Kong", "Hungary", "Iceland", "India", "Indonesia", "Ireland", "Israel", "Italy", "Japan", "Jordan", "Kenya", "Korea Republic", "Lebanon", "Luxembourg", "Malaysia", "Mexico", "Nepal", "Netherlands", "New Zealand", "Nigeria", "Norway", "Pakistan", "Panama", "Peru", "Philippines", "Poland", "Portugal", "Russian Federation", "Saudi Arabia", "Singapore", "Slovakia", "Slovenia", "South Africa", "Spain", "Sweden", "Switzerland", "Taiwan", "Thailand", "Turkey", "United Kingdom", "United States", "Venezuela", "Zimbabwe", "Itu", "Chile", "Bulgaria", "Croatia", "Romania", "Serbia and Montenegro", "United Arab Emirates", "Oman", "Kuwait", "Algeria", "Bahrain", "Iraq", "Mauritania", "Republic of Montenegro", "Morocco", "Qatar", "Republic of Serbia", "Sudan", "Tunisia", "Vietnam", "Yemen", "Lithuania", "Latvia", "Estonia", "Ukraine"]
			Media Resource List Name									Field Name: mEndpoints.[n].endpoint.mediaResourceListName Type: ["String", "Null"] Cardinality: [0..1]
			Packet Capture Mode								Default: None	Field Name: mEndpoints.[n].endpoint.packetCaptureMode Type: String Cardinality: [0..1] Default: None Choices: ["None", "Batch Processing Mode"]
			Use Device Pool Cgpn Transform Css								Default: True	Field Name: mEndpoints.[n].endpoint.useDevicePoolCgpnTransformCss Type: Boolean Cardinality: [0..1] Default: True
			Product *								Product ID string. read-only except when creating a device.	Field Name: mEndpoints.[n].endpoint.product Type: String Cardinality: [1..1] Choices: ["7914 14-Button Line Expansion Module", "7915 12-Button Line Expansion Module", "7915 24-Button Line Expansion Module", "7916 12-Button Line Expansion Module", "7916 24-Button Line Expansion Module", "AIM-VOICE-30", "Analog Phone", "Annunciator", "BEKEM 36-Button Line Expansion Module", "C881V", "C887VA-V", "CKEM 36-Button Line Expansion Module", "CP-8800-Audio 28-Button Key Expansion Module", "CP-8800-Video 28-Button Key Expansion Module", "CTI Port", "CTI Remote Device", "CTI Route Point", "Carrier-integrated Mobile", "Cisco IAD2400", "Cisco 12 S", "Cisco 12 SP", "Cisco 12 SP+", "Cisco 1751", "Cisco 1760", "Cisco 1861", "Cisco 269X", "Cisco 26XX", "Cisco 2801", "Cisco 2811", "Cisco 2821", "Cisco 2851", "Cisco 2901", "Cisco 2911", "Cisco 2921", "Cisco 2951", "Cisco 30 SP+", "Cisco 30 VIP", "Cisco 362X", "Cisco 364X", "Cisco 366X", "Cisco 3725", "Cisco 3745", "Cisco 3825", "Cisco 3845", "Cisco 3905", "Cisco 3911", "Cisco 3925", "Cisco 3925E", "Cisco 3945", "Cisco 3945E", "Cisco 3951", "Cisco 6901", "Cisco 6911", "Cisco 6921", "Cisco 6941", "Cisco 6945", "Cisco 6961", "Cisco 7811", "Cisco 7821", "Cisco 7832", "Cisco 7841", "Cisco 7861", "Cisco 7902", "Cisco 7905", "Cisco 7906", "Cisco 7910", "Cisco 7911", "Cisco 7912", "Cisco 7920", "Cisco 7921", "Cisco 7925", "Cisco 7926", "Cisco 7931", "Cisco 7935", "Cisco 7936", "Cisco 7937", "Cisco 7940", "Cisco 7941", "Cisco 7941G-GE", "Cisco 7942", "Cisco 7945", "Cisco 7960", "Cisco 7961", "Cisco 7961G-GE", "Cisco 7962", "Cisco 7965", "Cisco 7970", "Cisco 7971", "Cisco 7975", "Cisco 7985", "Cisco 860", "Cisco 881", "Cisco 8811", "Cisco 8821", "Cisco 8831", "Cisco 8832", "Cisco 8832NR", "Cisco 8841", "Cisco 8845", "Cisco 8851", "Cisco 8851NR", "Cisco 8861", "Cisco 8865", "Cisco 8865NR", "Cisco 888/887/886", "Cisco 8941", "Cisco 8945", "Cisco 8961", "Cisco 9951", "Cisco 9971", "Cisco ATA 186", "Cisco ATA 187", "Cisco ATA 190", "Cisco ATA 191", "Cisco C8200/L-1N-4T", "Cisco C8300-1N1S-4T2X", "Cisco C8300-1N1S-6T", "Cisco C8300-2N2S-4T2X/6T", "Cisco Catalyst 4000 Access Gateway Module", "Cisco Catalyst 4224 Voice Gateway Switch", "Cisco Catalyst 6000 12 port FXO Gateway", "Cisco Catalyst 6000 24 port FXS Gateway", "Cisco Catalyst 6000 E1 VoIP Gateway", "Cisco Catalyst 6000 T1 VoIP Gateway", "Cisco Cius", "Cisco Cius SP", "Cisco Collaboration Mobile Convergence", "Cisco Conference Bridge (WS-SVC-CMM)", "Cisco Conference Bridge Hardware", "Cisco Conference Bridge Software", "Cisco DX650", "Cisco DX70", "Cisco DX80", "Cisco Dual Mode for Android", "Cisco Dual Mode for iPhone", "Cisco E20", "Cisco ENCS 5400 ISRV", "Cisco IOS Conference Bridge", "Cisco IOS Enhanced Conference Bridge", "Cisco IOS Enhanced Media Termination Point", "Cisco IOS Enhanced Software Media Termination Point", "Cisco IOS Guaranteed Audio Video Conference Bridge", "Cisco IOS Heterogeneous Video Conference Bridge", "Cisco IOS Homogeneous Video Conference Bridge", "Cisco IOS Media Termination Point", "Cisco IP Communicator", "Cisco ISR 4321", "Cisco ISR 4331", "Cisco ISR 4351", "Cisco ISR 4431", "Cisco ISR 4451", "Cisco ISR 4461", "Cisco Jabber for Tablet", "Cisco MGCP BRI Port", "Cisco MGCP E1 Port", "Cisco MGCP FXO Port", "Cisco MGCP FXS Port", "Cisco MGCP T1 Port", "Cisco Media Server (WS-SVC-CMM-MS)", "Cisco Media Termination Point (WS-SVC-CMM)", "Cisco Media Termination Point Hardware", "Cisco Media Termination Point Software", "Cisco Meeting Server", "Cisco SIP FXS Port", "Cisco Spark Remote Device", "Cisco TelePresence", "Cisco TelePresence 1000", "Cisco TelePresence 1100", "Cisco TelePresence 1300-47", "Cisco TelePresence 1300-65", "Cisco TelePresence 200", "Cisco TelePresence 3000", "Cisco TelePresence 3200", "Cisco TelePresence 400", "Cisco TelePresence 500-32", "Cisco TelePresence 500-37", "Cisco TelePresence Codec C40", "Cisco TelePresence Codec C60", "Cisco TelePresence Codec C90", "Cisco TelePresence Conductor", "Cisco TelePresence DX70", "Cisco TelePresence EX60", "Cisco TelePresence EX90", "Cisco TelePresence Exchange System", "Cisco TelePresence IX5000", "Cisco TelePresence MCU", "Cisco TelePresence MX200", "Cisco TelePresence MX200 G2", "Cisco TelePresence MX300", "Cisco TelePresence MX300 G2", "Cisco TelePresence MX700", "Cisco TelePresence MX800", "Cisco TelePresence MX800 Dual", "Cisco TelePresence Profile 42 (C20)", "Cisco TelePresence Profile 42 (C40)", "Cisco TelePresence Profile 42 (C60)", "Cisco TelePresence Profile 52 (C40)", "Cisco TelePresence Profile 52 (C60)", "Cisco TelePresence Profile 52 Dual (C60)", "Cisco TelePresence Profile 65 (C60)", "Cisco TelePresence Profile 65 Dual (C90)", "Cisco TelePresence Quick Set C20", "Cisco TelePresence SX10", "Cisco TelePresence SX20", "Cisco TelePresence SX80", "Cisco TelePresence TX1310-65", "Cisco TelePresence TX9000", "Cisco TelePresence TX9200", "Cisco Unified Client Services Framework", "Cisco Unified Communications for RTX", "Cisco Unified Mobile Communicator", "Cisco Unified Personal Communicator", "Cisco VG200", "Cisco VG248 Gateway", "Cisco VGC Phone", "Cisco VGC Virtual Phone", "Cisco VGD-1T3", "Cisco VXC 6215", "Cisco Video Conference Bridge(IPVC-35xx)", "Cisco Voice Mail Port", "Cisco Webex Board 55", "Cisco Webex Board 70", "Cisco Webex Board 85", "Cisco Webex DX80", "Cisco Webex Desk LE", "Cisco Webex Desk Pro", "Cisco Webex Room 55", "Cisco Webex Room 55 Dual", "Cisco Webex Room 70 Dual", "Cisco Webex Room 70 Dual G2", "Cisco Webex Room 70 Panorama", "Cisco Webex Room 70 Single", "Cisco Webex Room 70 Single G2", "Cisco Webex Room Kit", "Cisco Webex Room Kit Mini", "Cisco Webex Room Kit Plus", "Cisco Webex Room Kit Pro", "Cisco Webex Room Panorama", "Cisco Webex Room Phone", "Cisco Webex VDI Svc Framework", "Communication Media Module", "EMCC Base Phone", "FLEX_SLOT", "Gatekeeper", "Generic Desktop Video Endpoint", "Generic Multiple Screen Room System", "Generic Single Screen Room System", "H.225 Trunk (Gatekeeper Controlled)", "H.323 Client", "H.323 Gateway", "Hunt List", "IAD2400_ANALOG", "IAD2400_DIGITAL", "IMS-integrated Mobile (Basic)", "IP-STE", "ISDN BRI Phone", "Inter-Cluster Trunk (Gatekeeper Controlled)", "Inter-Cluster Trunk (Non-Gatekeeper Controlled)", "Interactive Voice Response", "Load Simulator", "Motorola CN622", "Music On Hold", "NM-1V", "NM-2V", "NM-4VWIC-MBRD", "NM-HD-1V", "NM-HD-2V", "NM-HD-2VE", "NM-HDA", "NM-HDV", "NM-HDV2-0PORT", "NM-HDV2-1PORT", "NM-HDV2-2PORT", "Nokia S60", "PA-MCX", "PA-VXA", "PA-VXB", "PA-VXC", "Pilot", "Remote Destination Profile", "Route List", "SCCP Device", "SCCP gateway virtual phone", "SIP Trunk", "SIP WSM Connection", "SPA8800", "Third-party AS-SIP Endpoint", "Third-party SIP Device (Advanced)", "Third-party SIP Device (Basic)", "Transnova S3", "Universal Device Template", "Unknown", "VG202", "VG204", "VG224", "VG310", "VG320", "VG350", "VG400", "VG420", "VG450", "VGC Port", "VIC_SLOT", "VKEM 36-Button Line Expansion Module", "VNM-HDA", "VWIC_SLOT", "WS-SVC-CMM-MS", "WS-X6600"]
			Calling Party Number Prefix									Field Name: mEndpoints.[n].endpoint.callingPartyNumberPrefix Type: String Cardinality: [0..1] MaxLength: 16
			Description								Optional description of the device	Field Name: mEndpoints.[n].endpoint.description Type: String Cardinality: [0..1] MaxLength: 128
			Use Device Pool Cgpn Transform Css Unknown								Default: True	Field Name: mEndpoints.[n].endpoint.useDevicePoolCgpnTransformCssUnknown Type: Boolean Cardinality: [0..1] Default: True
			Use Device Pool Cdpn Transform Css								Default: True	Field Name: mEndpoints.[n].endpoint.useDevicePoolCdpnTransformCss Type: Boolean Cardinality: [0..1] Default: True
			Geo Location Name									Field Name: mEndpoints.[n].endpoint.geoLocationName Type: ["String", "Null"] Cardinality: [0..1]
			Elin Group									Field Name: mEndpoints.[n].endpoint.elinGroup Type: ["String", "Null"] Cardinality: [0..1]
			Cdpn Transformation Css Name									Field Name: mEndpoints.[n].endpoint.cdpnTransformationCssName Type: ["String", "Null"] Cardinality: [0..1]
			Class *								Class ID string. Class information is read-only except when creating a device.	Field Name: mEndpoints.[n].endpoint.class Type: String Cardinality: [1..1] Choices: ["Phone", "Gateway", "Conference Bridge", "Media Termination Point", "Route List", "Voice Mail", "CTI Route Point", "Music On Hold", "Simulation", "Pilot", "GateKeeper", "Add-on modules", "Hidden Phone", "Trunk", "Tone Announcement Player", "Remote Destination Profile", "EMCC Base Phone Template", "EMCC Base Phone", "Remote Destination Profile Template", "Gateway Template", "UDP Template", "Phone Template", "Device Profile", "Invalid", "Interactive Voice Response"]
			Hotline Device								This tag is applicable for MGCP FXS ports,which supports PLAR.	Field Name: mEndpoints.[n].endpoint.hotlineDevice Type: Boolean Cardinality: [0..1]
			Name *								The device name,using only URL-friendly characters	Field Name: mEndpoints.[n].endpoint.name Type: String Cardinality: [1..1] MaxLength: 128
			Retry Video Call As Audio								Default: True	Field Name: mEndpoints.[n].endpoint.retryVideoCallAsAudio Type: Boolean Cardinality: [0..1] Default: True
			Protocol Side *								Side information is read-only except when creating a device Default: User	Field Name: mEndpoints.[n].endpoint.protocolSide Type: String Cardinality: [1..1] Default: User Choices: ["Network", "User"]
			Trunk Selection Order *									Field Name: mEndpoints.[n].endpoint.trunkSelectionOrder Type: String Cardinality: [1..1] Choices: ["Bottom Up", "Top Down"]
			Mlpp Domain Id								This setting only effects devices that support MLPP. Use -1 to set to null	Field Name: mEndpoints.[n].endpoint.mlppDomainId Type: ["String", "Null"] Cardinality: [0..1] MaxLength: 128
			Aar Neighborhood Name									Field Name: mEndpoints.[n].endpoint.aarNeighborhoodName Type: ["String", "Null"] Cardinality: [0..1]
			Location Name *									Field Name: mEndpoints.[n].endpoint.locationName Type: String Cardinality: [1..1]
			Transmit Utf8									Field Name: mEndpoints.[n].endpoint.transmitUtf8 Type: Boolean Cardinality: [0..1]
			Cgpn Transformation Css Name									Field Name: mEndpoints.[n].endpoint.cgpnTransformationCssName Type: ["String", "Null"] Cardinality: [0..1]
			Automated Alternate Routing Css Name									Field Name: mEndpoints.[n].endpoint.automatedAlternateRoutingCssName Type: ["String", "Null"] Cardinality: [0..1]
			Device Pool Name *									Field Name: mEndpoints.[n].endpoint.devicePoolName Type: ["String", "Null"] Cardinality: [1..1]
			Model								Model ID string. Read Only	Field Name: mEndpoints.[n].endpoint.model Type: String Cardinality: [0..1] Choices: ["Cisco 30 SP+", "Cisco 12 SP+", "Cisco 12 SP", "Cisco 12 S", "Cisco 30 VIP", "Cisco 7910", "Cisco 7960", "Cisco 7940", "Cisco 7935", "Cisco VGC Phone", "Cisco VGC Virtual Phone", "Cisco ATA 186", "EMCC Base Phone", "SCCP Phone", "Analog Access", "Digital Access", "Digital Access+", "Digital Access WS-X6608", "Analog Access WS-X6624", "VGC Gateway", "Conference Bridge", "Conference Bridge WS-X6608", "Cisco IOS Conference Bridge (HDV2)", "Cisco Conference Bridge (WS-SVC-CMM)", "H.323 Phone", "H.323 Gateway", "Music On Hold", "Device Pilot", "CTI Port", "CTI Route Point", "Voice Mail Port", "Cisco IOS Software Media Termination Point (HDV2)", "Cisco Media Server (WS-SVC-CMM-MS)", "Cisco Video Conference Bridge (IPVC-35xx)", "Cisco IOS Heterogeneous Video Conference Bridge", "Cisco IOS Guaranteed Audio Video Conference Bridge", "Cisco IOS Homogeneous Video Conference Bridge", "Route List", "Load Simulator", "Media Termination Point", "Media Termination Point Hardware", "Cisco IOS Media Termination Point (HDV2)", "Cisco Media Termination Point (WS-SVC-CMM)", "Cisco 7941", "Cisco 7971", "MGCP Station", "MGCP Trunk", "GateKeeper", "7914 14-Button Line Expansion Module", "Trunk", "Tone Announcement Player", "SIP Trunk", "SIP Gateway", "WSM Trunk", "Remote Destination Profile", "7915 12-Button Line Expansion Module", "7915 24-Button Line Expansion Module", "7916 12-Button Line Expansion Module", "7916 24-Button Line Expansion Module", "CKEM 36-Button Line Expansion Module", "SPA8800", "Unknown MGCP Gateway", "Unknown", "Cisco 7985", "Cisco 7911", "Cisco 7961G-GE", "Cisco 7941G-GE", "Motorola CN622", "Third-party SIP Device (Basic)", "Cisco 7931", "Cisco Unified Personal Communicator", "Cisco 7921", "Cisco 7906", "Third-party SIP Device (Advanced)", "Cisco TelePresence", "Nokia S60", "Cisco 7962", "Cisco 3951", "Cisco 7937", "Cisco 7942", "Cisco 7945", "Cisco 7965", "Cisco 7975", "Cisco 3911", "Cisco Unified Mobile Communicator", "Cisco TelePresence 1000", "Cisco TelePresence 3000", "Cisco TelePresence 3200", "Cisco TelePresence 500-37", "Cisco 7925", "Cisco 9971", "Cisco 6921", "Cisco 6941", "Cisco 6961", "Cisco Unified Client Services Framework", "Cisco TelePresence 1300-65", "Cisco TelePresence 1100", "Transnova S3", "BlackBerry MVS VoWifi", "Cisco 9951", "Cisco 8961", "Cisco 6901", "Cisco 6911", "Cisco ATA 187", "Cisco TelePresence 200", "Cisco TelePresence 400", "Cisco Dual Mode for iPhone", "Cisco 6945", "Cisco Dual Mode for Android", "Cisco 7926", "Cisco E20", "Generic Single Screen Room System", "Generic Multiple Screen Room System", "Cisco TelePresence EX90", "Cisco 8945", "Cisco 8941", "Generic Desktop Video Endpoint", "Cisco TelePresence 500-32", "Cisco TelePresence 1300-47", "Cisco 3905", "Cisco Cius", "VKEM 36-Button Line Expansion Module", "Cisco TelePresence TX1310-65", "Cisco TelePresence MCU", "Ascom IP-DECT Device", "Cisco TelePresence Exchange System", "Cisco TelePresence EX60", "Cisco TelePresence Codec C90", "Cisco TelePresence Codec C60", "Cisco TelePresence Codec C40", "Cisco TelePresence Quick Set C20", "Cisco TelePresence Profile 42 (C20)", "Cisco TelePresence Profile 42 (C60)", "Cisco TelePresence Profile 52 (C40)", "Cisco TelePresence Profile 52 (C60)", "Cisco TelePresence Profile 52 Dual (C60)", "Cisco TelePresence Profile 65 (C60)", "Cisco TelePresence Profile 65 Dual (C90)", "Cisco TelePresence MX200", "Cisco TelePresence TX9000", "Cisco TelePresence TX9200", "Cisco 7821", "Cisco 7841", "Cisco 7861", "Cisco TelePresence SX20", "Cisco TelePresence MX300", "IMS-integrated Mobile (Basic)", "Third-party AS-SIP Endpoint", "Cisco Cius SP", "Cisco TelePresence Profile 42 (C40)", "Cisco VXC 6215", "CTI Remote Device", "Usage Profile", "Carrier-integrated Mobile", "Universal Device Template", "Cisco DX650", "Cisco Unified Communications for RTX", "Cisco Jabber for Tablet", "Cisco 8831", "Cisco ATA 190", "Cisco TelePresence SX10", "Cisco 8841", "Cisco 8851", "Cisco 8861", "Cisco TelePresence SX80", "Cisco TelePresence MX200 G2", "Cisco TelePresence MX300 G2", "Cisco 7905", "Cisco 7920", "Cisco 7970", "Cisco 7912", "Cisco 7902", "Cisco IP Communicator", "Cisco 7961", "Cisco 7936", "Analog Phone", "ISDN BRI Phone", "SCCP gateway virtual phone", "IP-STE", "Cisco TelePresence Conductor", "Cisco DX80", "Cisco DX70", "BEKEM 36-Button Line Expansion Module", "Cisco TelePresence MX700", "Cisco TelePresence MX800", "Cisco TelePresence IX5000", "Cisco 7811", "Cisco 8821", "Cisco 8811", "Interactive Voice Response", "Cisco 8845", "Cisco 8865", "Cisco TelePresence MX800 Dual", "Cisco 8851NR", "Cisco Spark Remote Device", "Cisco Webex DX80", "Cisco TelePresence DX70", "Cisco 7832", "Cisco 8865NR", "Cisco Meeting Server", "Cisco Webex Room Kit", "Cisco Webex Room 55", "Cisco Webex Room Kit Plus", "CP-8800-Video 28-Button Key Expansion Module", "CP-8800-Audio 28-Button Key Expansion Module", "Cisco 8832", "Cisco Webex Room 70 Single", "Cisco 8832NR", "Cisco ATA 191", "Cisco Collaboration Mobile Convergence", "Cisco Webex Room 70 Dual", "Cisco Webex Room Kit Pro", "Cisco Webex Room 55 Dual", "Cisco Webex Room 70 Single G2", "Cisco Webex Room 70 Dual G2", "SIP Station", "Cisco Webex Room Kit Mini", "Cisco Webex VDI Svc Framework", "Cisco Webex Board 55", "Cisco Webex Board 70", "Cisco Webex Board 85", "Cisco Webex Desk Pro", "Cisco Webex Room Panorama", "Cisco Webex Room 70 Panorama", "Cisco Webex Room Phone", "Cisco 860", "Cisco Webex Desk LE"]
			Ime E164Transformation Name									Field Name: mEndpoints.[n].endpoint.imeE164TransformationName Type: ["String", "Null"] Cardinality: [0..1]
			Ime E164Directory Number									Field Name: mEndpoints.[n].endpoint.imeE164DirectoryNumber Type: String Cardinality: [0..1] MaxLength: 16
		Unit *										Field Name: mEndpoints.[n].unit Type: Integer Cardinality: [1..1]
		Domain Name										Field Name: mEndpoints.[n].domainName Type: String Cardinality: [0..1]

Model: relation/HcsAnalogGatewayREL

Analog Gateways

Analog Gateways

Model Details: relation/HcsAnalogGatewayREL