[Index]

Model: device/cuc/UserTemplate

Model Details: device/cuc/UserTemplate

Title Description Details
Voice Name The name of the WAV file containing the recorded audio (voice name, greeting, etc.) for the parent object.
  • Field Name: VoiceName
  • Type: String
Address Mode The default method the subscriber will use to address messages to other subscribers.
  • Field Name: AddressMode
  • Type: Integer
  • Choices: ["LastNameFirst", "Extension", "FirstNameFirst"]
Message Aging Policy URI
  • Field Name: MessageAgingPolicyURI
  • Type: String
  • Format: uri
Exit Target Handler The name of the specific object to send along to the target conversation.
  • Field Name: ExitTargetHandlerObjectId
  • Type: String
  • Target: device/cuc/Callhandler
  • Target attr: ObjectId
  • Format: uri
User Template Roles URI
  • Field Name: UserTemplateRolesURI
  • Type: String
  • Format: uri
Say Timestamp After A flag indicating whether Cisco Unity Connection announces the timestamp after it plays back each message for the subscriber.
  • Field Name: SayTimestampAfter
  • Type: Boolean
Department The name or number for the department or subdivision of an organization to which a person belongs.
  • Field Name: Department
  • Type: String
Greet By Name A flag indicating whether the subscriber hears his/her name when they log into their mailbox over the phone.
  • Field Name: GreetByName
  • Type: Boolean
Address The physical address such as a house number and street name where the user is located, or with which a user is associated.
  • Field Name: Address
  • Type: String
Send Quota The mailbox size (in bytes) send limit.
  • Field Name: SendQuota
  • Type: Integer
Speech Sensitivity A variable level of sound sensitivity that enables the speech engine to filter out background noise and not mistake it for speech. A higher value means higher sensitivity.
  • Field Name: SpeechSensitivity
  • Type: Integer
Ldap Type The LDAP configuration information for the user.
  • Field Name: LdapType
  • Type: Integer
Save Message On Hangup A flag indicating when hanging up while listening to a new message, whether the message is marked new again or is marked read.
  • Field Name: SaveMessageOnHangup
  • Type: Boolean
Enable Visual Message Locator A flag indicating whether the visual message locator feature is enabled for the subscriber. The visual message locator feature presents a list of messages on the subscriber's IP phone display for the subscriber to select from visually.
  • Field Name: EnableVisualMessageLocator
  • Type: Boolean
Repeat Menu The number of times to repeat a menu in TUI.
  • Field Name: RepeatMenu
  • Type: Integer
Building The name of the building where the user is based (e.g., SJ-21).
  • Field Name: Building
  • Type: String
Search By Extension Search Space URI
  • Field Name: SearchByExtensionSearchSpaceURI
  • Type: String
  • Format: uri
Conversation Vui The VUI conversation assigned to the subscriber.
  • Field Name: ConversationVui
  • Type: String
Object Id The primary key for this table. A globally unique, system-generated identifier for a User object. - template parameter [1]
  • Field Name: ObjectId
  • Type: String
Command Digit Timeout The amount of time (in milliseconds) between digits on a multiple digit menu command entry (i.e. different than the inter digit timeout that is used for strings of digits such as extensions and transfer strings).
  • Field Name: CommandDigitTimeout
  • Type: Integer
Jump To Messages On Login A flag indicating whether the subscriber conversation jumps directly to the first message in the message stack after subscriber sign-in.
  • Field Name: JumpToMessagesOnLogin
  • Type: Boolean
Say Sender A flag indicating whether Cisco Unity Connection announces the sender of a message during message playback for the subscriber.
  • Field Name: SaySender
  • Type: Boolean
URI
  • Field Name: URI
  • Type: String
  • Format: uri
Message Locator Sort Order The order in which Cisco Unity Connection will sort messages when the "Message Locator" feature is enabled.
  • Field Name: MessageLocatorSortOrder
  • Type: Integer
Mailbox Dn The distinguished name of the mailbox.
  • Field Name: MailboxDn
  • Type: String
User Template Notification Devices URI
  • Field Name: UserTemplateNotificationDevicesURI
  • Type: String
  • Format: uri
Synch Schedule URI
  • Field Name: SynchScheduleURI
  • Type: String
  • Format: uri
Client Matter Code The client matter code to transmit to Call Manger when a phone number is dialed on an outbound call. The CMC is entered after a phone number is dialed so that the customer can assigning account or billing codes to the call. Whether or not the CMC will be transmitted is dictated by a setting on outbound call. The subscriber's CMC is used only if the outbound call doesn't have its own CMC.
  • Field Name: ClientMatterCode
  • Type: String
Confirm Delete Deleted Message A flag indicating whether Cisco Unity Connection will request confirmation from a subscriber before proceeding with a deletion of a single deleted message.
  • Field Name: ConfirmDeleteDeletedMessage
  • Type: Boolean
Enable Save Draft A flag indicating whether the save draft message feature is enabled for the subscriber.
  • Field Name: EnableSaveDraft
  • Type: Boolean
Voice File URI
  • Field Name: VoiceFileURI
  • Type: String
  • Format: uri
Cant Change A flag indicating whether the user can set/change their credential (i.e., the credential specified by the associated credential policy).
  • Field Name: CantChange
  • Type: Boolean
Exit Call Action The name of the CallAction object that is taken when a caller exits the subscriber conversation by pressing the * key or timing out.
  • Field Name: ExitCallActionObjectId
  • Type: String
  • Target: device/cuc/Callhandler
  • Target attr: ObjectId
  • Format: uri
Say Msg Number A flag indicating whether Cisco Unity Connection announces the position of each message in the stack (i.e., 'Message 1', 'Message 2' ,etc.) during message playback for the subscriber.
  • Field Name: SayMsgNumber
  • Type: Boolean
Say Total New Voice A flag indicating whether Cisco Unity Connection announces the total number of new voice messages in the subscriber mailbox.
  • Field Name: SayTotalNewVoice
  • Type: Boolean
Read Only If set to 1 (true) user is read-only and cannot be modified.
  • Field Name: ReadOnly
  • Type: Boolean
Say Sender Extension A flag indicating whether Cisco Unity Connection during message playback, plays the primary extension information of the subscriber who sent the message after playing the sender's voice name.
  • Field Name: SaySenderExtension
  • Type: Boolean
Saved Message Stack Order The order in which Cisco Unity Connection plays the following types of "saved" messages: * Urgent voice messages * Non-urgent voice messages * Urgent fax messages * Non-urgent fax messages * Urgent e-mail messages * Non-urgent e-mail messages * Receipts and notices
  • Field Name: SavedMessageStackOrder
  • Type: String
Say Sender Extension After This flag works exactly the same as the SaySenderExtension flag on a user, except the conversation plays the sender's extension in the message footer.
  • Field Name: SaySenderExtensionAfter
  • Type: Boolean
Message Aging Policy The name of the MessageAgingPolicy object that applies to the mailbox created for a new subscriber created with this template.
  • Field Name: MessageAgingPolicyObjectId
  • Type: String
  • Target: device/cuc/MessageAgingPolicy
  • Target attr: ObjectId
  • Format: uri
Display Name * The preferred text name of a person to be used when displaying entries such as in the administrative console, e.g. Cisco Unity Connection Administration.
  • Field Name: DisplayName
  • Type: String
Inbox Auto Refresh The rate (in minutes) at which Unity Inbox performs a refresh.
  • Field Name: InboxAutoRefresh
  • Type: Integer
Use Default Time Zone Set to true (1) if the TimeZone is derived from the location to which this call handler belongs.
  • Field Name: UseDefaultTimeZone
  • Type: Boolean
Warning Quota The mailbox size (in bytes) warning limit.
  • Field Name: WarningQuota
  • Type: Integer
Phone System URI
  • Field Name: PhoneSystemURI
  • Type: String
  • Format: uri
State The full name of the state or province where this user is located, or with which a user is associated.
  • Field Name: State
  • Type: String
Doesnt Expire A flag indicating whether or not the user credential will automatically expire (and the user required to change the credential upon its expiration) based on a defined schedule. Regardless, the user still may change the credential (if allowed by CantChange).
  • Field Name: DoesntExpire
  • Type: Boolean
Announce Upcoming Meetings The amount ahead of time, in minutes, that Connection will warn the subscriber of upcoming meetings when the subscriber calls into the system.
  • Field Name: AnnounceUpcomingMeetings
  • Type: Integer
Say Ani A flag indicating whether Cisco Unity Connection plays the Automatic Number Identification (ANI) information during message playback for voice messages from unidentified callers.
  • Field Name: SayAni
  • Type: Boolean
New Message Sort Order The order in which Cisco Unity Connection will sort new messages.
  • Field Name: NewMessageSortOrder
  • Type: Integer
Notification Type The notification type to use for this mailbox created with this subscriber. See definitions under custom type - NotificationType for more details.
  • Field Name: NotificationType
  • Type: Integer
Fax Server The name of the FaxServer object for the subscriber.
  • Field Name: FaxServerObjectId
  • Type: String
  • Target: device/cuc/FaxServer
  • Target attr: ObjectId
  • Format: uri
Location The name of the LocationVMS object to which this user belongs.
  • Field Name: LocationObjectId
  • Type: String
  • Target: device/cuc/Location
  • Target attr: ObjectId
  • Format: uri
Country The two-letter ISO 3166-1 country code where the user is located, or with which a user is associated.
  • Field Name: Country
  • Type: String
Prompt Speed The audio speed Cisco Unity Connection uses to play back prompts to the subscriber.
  • Field Name: PromptSpeed
  • Type: Integer
En Alt Greet Prevent Skip A flag indicating whether callers can skip the greeting while it is playing when the alternate greeting is turned on.
  • Field Name: EnAltGreetPreventSkip
  • Type: Boolean
Continuous Add Mode A flag indicating whether when addressing, after entering one recipient name, whether the subscriber is asked to enter another name or assume the subscriber is finished adding names and is ready to move on to recording the message or applying message options.
  • Field Name: ContinuousAddMode
  • Type: Boolean
Assistant Rows Per Page This controls the number of entries to display per page for all tables in the Unity Assistant, e.g. the Private List Members table.
  • Field Name: AssistantRowsPerPage
  • Type: Integer
Confirm Delete Multiple Messages A flag indicating whether Cisco Unity Connection allows the subscriber to choose which message they want to delete or whether Cisco Unity Connection permanently deletes the specified type of messages. Changes what Cisco Unity Connection does when subscribers press 3 > 2 > 2 from the Main menu to permanently delete multiple deleted messages at once.
  • Field Name: ConfirmDeleteMultipleMessages
  • Type: Boolean
Enable Message Bookmark A flag indicating whether Message Bookmark is enabled for the subscriber
  • Field Name: EnableMessageBookmark
  • Type: Boolean
Inbox Messages Per Page The number of messages Unity Inbox displays in a page.
  • Field Name: InboxMessagesPerPage
  • Type: Integer
Pab Last Imported The date and time when the personal address book was last imported from a groupware package into the personal groups for a user.
  • Field Name: PabLastImported
  • Type: String
Pca Home Page The Home Page is the first page that is displayed after logging in to the PCA.
  • Field Name: PcaHomePage
  • Type: String
Update Broadcast Msg A flag indicating whether the subscriber has the ability to update broadcast messages that are active or will be active in the future.
  • Field Name: UpdateBroadcastMsg
  • Type: Boolean
Say Copied Names A flag indicating whether Cisco Unity Connection announces the "copied" names during message playback for a subscriber.
  • Field Name: SayCopiedNames
  • Type: Boolean
Inbox Auto Resolve Message Recipients A flag indicating whether Cisco Unity Connection automatically resolves a recipient address entered in the To, Cc or Bcc fields to a subscriber or distribution list. Known as the "AutoResolve" feature.
  • Field Name: InboxAutoResolveMessageRecipients
  • Type: Boolean
Skip Forward Time Indicates the amount of time (in milliseconds) to jump forward when skipping ahead in a voice or TTS message using either DTMF or voice commands while reviewing messages.
  • Field Name: SkipForwardTime
  • Type: Integer
Say Message Length After This flag works exactly the same as the SayMessageLength flag on a user, except the conversation plays the message length in the message footer.
  • Field Name: SayMessageLengthAfter
  • Type: Boolean
Use Vui A flag indicating whether the speech recognition conversation is the default conversation for the subscriber.
  • Field Name: UseVui
  • Type: Boolean
Speech Confidence Threshold When the engine matches a spoken phrase, it associates a confidence level with that conclusion. This parameter determines what confidence level should be considered a successful match. A higher value means the engine is will report fewer successful matches, but it will be more confident in the matches that it reports.
  • Field Name: SpeechConfidenceThreshold
  • Type: Integer
First Digit Timeout The amount of time to wait (in milliseconds) for first digit when collecting touch tones.
  • Field Name: FirstDigitTimeout
  • Type: Integer
Address After Record A flag indicating whether the subscriber will be prompted to address message before or after it is recorded.
  • Field Name: AddressAfterRecord
  • Type: Boolean
Phone System The name of the MediaSwitch object to be used for subscriber Telephone Record and Playback (TRAP) sessions and to dial MWI on or off requests when the CUC system has a dual switch integration.
  • Field Name: MediaSwitchObjectId
  • Type: String
  • Target: device/cuc/PhoneSystem
  • Target attr: ObjectId
  • Format: uri
Exit Target Conversation The name of the conversation to which the caller is routed.
  • Field Name: ExitTargetConversation
  • Type: String
Saved Message Sort Order The order in which Cisco Unity Connection will sort saved messages.
  • Field Name: SavedMessageSortOrder
  • Type: Integer
Partition URI
  • Field Name: PartitionURI
  • Type: String
  • Format: uri
Use Brief Prompts A flag indicating whether the subscriber hears brief or full phone menus when accessing Cisco Unity Connection over the phone.
  • Field Name: UseBriefPrompts
  • Type: Boolean
Skip Password For Known Device A flag indicating whether the subscriber will be asked for his/her PIN when attempting to sign-in from a known device.
  • Field Name: SkipPasswordForKnownDevice
  • Type: Boolean
Message Type Menu A flag indicating whether Cisco Unity Connection plays the message type menu when the subscriber logs on to Cisco Unity Connection over the phone.
  • Field Name: MessageTypeMenu
  • Type: Boolean
Skip Reverse Time Indicates the amount of time (in milliseconds) to jump backward when skipping in reverse in a voice or TTS message using either DTMF or voice commands while reviewing messages.
  • Field Name: SkipReverseTime
  • Type: Integer
Route NDR To Sender A flag indicating, for an undeliverable message, whether NDR messages will appear in the subscriber's mailbox or are deleted by the system.
  • Field Name: RouteNDRToSender
  • Type: Boolean
Interdigit Delay The amount of time to wait (in milliseconds) for input between touch tones when collecting digits in TUI.
  • Field Name: InterdigitDelay
  • Type: Integer
Voice Name URI
  • Field Name: VoiceNameURI
  • Type: String
  • Format: uri
Say Timestamp Before A flag indicating whether Cisco Unity Connection announces the timestamp before it plays back each for the subscriber.
  • Field Name: SayTimestampBefore
  • Type: Boolean
Send Read Receipts A flag indicating whether the mailbox created with this subscriber allows the system to send read receipts on its behalf.
  • Field Name: SendReadReceipts
  • Type: Integer
  • Choices: ["Disable", "Enable"]
User Template Video Service Accounts URI
  • Field Name: UserTemplateVideoServiceAccountsURI
  • Type: String
  • Format: uri
Partition Name The name of the Partition to which a subscriber's DtmfAccessId created with this template will be assigned.
  • Field Name: PartitionObjectId
  • Type: String
  • Target: device/cuc/Partition
  • Target attr: ObjectId
  • Format: uri
Say Msg Number After This flag works exactly the same as the SayMsgNumber flag on a user, except the conversation plays the message number in the message footer.
  • Field Name: SayMsgNumberAfter
  • Type: Boolean
Speech Complete Timeout Specifies the required length of silence (in milliseconds) following user speech before the recognizer finalizes a result (either accepting it or throwing a nomatch event). The SpeechCompleteTimeout property is used when the speech prior to the silence matches an active grammar. A long SpeechCompleteTimeout value delays the result completion and therefore makes the system's response slow. A short SpeechCompleteTimeout value may lead to the inappropriate break up of an utterance. Reasonable SpeechCompleteTimeout values are typically in the range of 0.3 seconds to 1.0 second. See Appendix D?Timing properties of the VoiceXML Specification for details.
  • Field Name: SpeechCompleteTimeout
  • Type: Integer
Forced Authorization Code A valid authorization code that is entered prior to extending calls to classes of dialed numbers, for example, external, toll and international calls.
  • Field Name: ForcedAuthorizationCode
  • Type: String
En Alt Greet Prevent Msg A flag indicating whether callers can leave a message after the greeting when the subscriber alternate greeting is turned on.
  • Field Name: EnAltGreetPreventMsg
  • Type: Boolean
Auto Advance Msgs A flag indicating that the conversation will, during playback, advance to the next message in the playback stack automatically after it is done playing the after message menu.
  • Field Name: AutoAdvanceMsgs
  • Type: Boolean
En Alt Greet Dont Ring Phone A flag indicating whether a caller is prevented from being transferred to the subscriber phone when the subscriber alternate greeting is turned on.
  • Field Name: EnAltGreetDontRingPhone
  • Type: Boolean
Template Alias Query parameter
  • Field Name: templateAlias
  • Type: ["String"]
  • Target: device/cuc/UserTemplate
  • Target attr: Alias
  • Format: uri
Enable Message Locator A flag indicating whether the message locator feature is enabled for the subscriber.
  • Field Name: EnableMessageLocator
  • Type: Boolean
Create Smtp Proxy From Corp Flag indicating whether an SMTP proxy address matching the corporate e-mail address (column EmailAddress) should be created for this User.
  • Field Name: CreateSmtpProxyFromCorp
  • Type: Boolean
Display Name Rule The format for generating the user display name.
  • Field Name: DisplayNameRule
  • Type: Integer
  • Choices: ["FirstLast", "LastFirst"]
Is Set For Vm Enrollment Temporary placeholder until IsVmEnrolled can be phased out. At that point, delete this column and rename tbl_UserSubscriber.IsVmEnrolled to IsSetForVmEnrollment. A flag indicating whether Cisco Unity Connection plays the enrollment conversation (record a voice name, indicate if they are listed in the directory, etc.) for the subscriber when they login.
  • Field Name: IsSetForVmEnrollment
  • Type: Boolean
Creation Time The date and time the user account was created.
  • Field Name: CreationTime
  • Type: String
Default User Template URI The URI to change default usertemplate.
  • Field Name: DefaultUserTemplateURI
  • Type: String
Clock Mode The time format used for the message timestamps that the subscriber hears when they listen to their messages over the phone.
  • Field Name: ClockMode
  • Type: Integer
  • Choices: ["SystemDefaultClock", "HourClock12", "HourClock24"]
Retain Urgent Message Flag A flag that indicates whether the urgent message flag on a message is retained for both reply and forward message actions. The default value is 0; the urgent message flag is NOT retained for both reply and forward message actions.
  • Field Name: RetainUrgentMessageFlag
  • Type: Boolean
Ldap Ccm User Id The userid of associated end user in the sleeping SeaDragon database.
  • Field Name: LdapCcmUserId
  • Type: String
Conversation Tui The name of the conversation the subscriber uses to set up, send, and retrieve messages.
  • Field Name: ConversationTui
  • Type: String
Ring Primary Phone First A flag indicating whether a subscriber's primary phone should be rung before trying other destinations in a personal group.
  • Field Name: RingPrimaryPhoneFirst
  • Type: Boolean
Postal Code For users in the United States, the zip code where the user is located. For users in Canada, Mexico, and other countries, the postal code where the user is located.
  • Field Name: PostalCode
  • Type: String
Xfer String The alternate transfer option. If null the primary dtmf id will be used.
  • Field Name: XferString
  • Type: String
Confirmation Confidence Threshold Voice Recognition Confirmation Confidence Threshold
  • Field Name: ConfirmationConfidenceThreshold
  • Type: Integer
Undeletable A flag indicating whether this subscriber can be deleted via an administrative application such as Cisco Unity Connection Administration. It is used to prevent deletion of factory defaults.
  • Field Name: Undeletable
  • Type: Boolean
Delay After Greeting The amount of time (in milliseconds) Cisco Unity Connection will delay after playing greeting.
  • Field Name: DelayAfterGreeting
  • Type: Integer
Encrypt Private Messages A flag indicating whether Cisco Unity Connection encrypts messages from the subscriber that are marked private.
  • Field Name: EncryptPrivateMessages
  • Type: Boolean
User Template Notification Device URI The URI to change NotificationDevices of the template.
  • Field Name: UserTemplateNotificationDeviceURI
  • Type: String
Say Total Receipts A flag indicating whether Cisco Unity Connection announces the total number of new receipts in the subscriber mailbox.
  • Field Name: SayTotalReceipts
  • Type: Boolean
New Message Stack Order The order in which Cisco Unity Connection plays the following types of "new" messages: * Urgent voice messages * Non-urgent voice messages * Urgent fax messages * Non-urgent fax messages * Urgent e-mail messages * Non-urgent e-mail messages * Receipts and notices
  • Field Name: NewMessageStackOrder
  • Type: String
User Template Web Password URI The URI to change the web application password.
  • Field Name: UserTemplateWebPasswordURI
  • Type: String
User Template Voice Pin URI The URI to change the voice mail pin of the template.
  • Field Name: UserTemplateVoicePinURI
  • Type: String
Is Vm Enrolled A flag indicating whether Cisco Unity Connection plays the enrollment conversation (record a voice name, indicate if they are listed in the directory, etc.) for the subscriber when they login.
  • Field Name: IsVmEnrolled
  • Type: Boolean
Enable Tts A flag indicating whether TTS is enabled for the subscriber. Only relevant if TTS enabled in User's COS also.
  • Field Name: EnableTts
  • Type: Boolean
Mailbox Store The name of the MailboxStore object where a mailbox is created for a new subscriber created with this template.
  • Field Name: MailboxStoreObjectId
  • Type: String
  • Target: device/cuc/MailboxStore
  • Target attr: ObjectId
  • Format: uri
Search By Extension Search Space The name of the SearchSpace which is used to limit the visibility to dialable/addressable objects when searching by extension (dial string).
  • Field Name: SearchByExtensionSearchSpaceObjectId
  • Type: String
  • Target: device/cuc/SearchSpace
  • Target attr: ObjectId
  • Format: uri
Pca Address Book Rows Per Page Controls the number of matching entries the Address Book displays per page, when a search is performed. The Address Book is used across multiple PCA applications and so this setting applies globally.
  • Field Name: PcaAddressBookRowsPerPage
  • Type: Integer
Location URI
  • Field Name: LocationURI
  • Type: String
  • Format: uri
Say Distribution List A flag indicating whether Cisco Unity Connection announces the distribution list that sends a message, if applicable.
  • Field Name: SayDistributionList
  • Type: Boolean
City The name of a locality, such as a city, county or other geographic region where the user is located, or with which a user is associated.
  • Field Name: City
  • Type: String
Send Broadcast Msg A flag indicating whether the subscriber may send broadcast messages.
  • Field Name: SendBroadcastMsg
  • Type: Boolean
Exit Action The type of call action to take, e.g., hang-up, goto another object, etc.
  • Field Name: ExitAction
  • Type: Integer
Voice Name Required A flag indicating whether a recorded voice name is required for this subscriber.
  • Field Name: VoiceNameRequired
  • Type: Boolean
Say Total New Fax A flag indicating whether Cisco Unity Connection announces the total number of new fax messages in the subscriber mailbox.
  • Field Name: SayTotalNewFax
  • Type: Boolean
Call Handler The name of the primary CallHandler object for the subscriber.
  • Field Name: CallHandlerObjectId
  • Type: String
  • Target: device/cuc/Callhandler
  • Target attr: ObjectId
  • Format: uri
Time Zone The time zone to which this user account is associated.
  • Field Name: TimeZone
  • Type: Integer
Say Sender After This flag works exactly the same as the SaySender flag on a user, except the conversation plays the sender in the message footer.
  • Field Name: SaySenderAfter
  • Type: Boolean
Name Confirmation Indicates whether the voice name of the subscriber or distribution list added to an address list when a subscriber addresses a message to other subscribers is played. The default value for this is off (no voice name played) since the voice name was just played as part of the list of matches . To most users this sounds redundant when on, but some users prefer it.
  • Field Name: NameConfirmation
  • Type: Boolean
Search By Name Search Space URI
  • Field Name: SearchByNameSearchSpaceURI
  • Type: String
  • Format: uri
Enable Personal Rules A flag indicating whether a subscriber's personal rules are enabled. Subscribers can use this setting to disable all personal rules at once.
  • Field Name: EnablePersonalRules
  • Type: Boolean
Confirm Delete Message A flag indicating whether Cisco Unity Connection will request confirmation from a subscriber before proceeding with a deletion of a single new or saved message.
  • Field Name: ConfirmDeleteMessage
  • Type: Boolean
Synch Schedule The name of the Schedule object to use for synchronization Calendar information from groupware (such as Exchange).
  • Field Name: SynchScheduleObjectId
  • Type: String
  • Target: device/cuc/Schedule
  • Target attr: ObjectId
  • Format: uri
Language The preferred language of this user. For a user with a voice mailbox, it is the language in which the subscriber hears instructions played to them. If the subscriber has TTS enabled by their COS, it is the language used for TTS.
  • Field Name: Language
  • Type: Integer
Template External Service Accounts URI
  • Field Name: TemplateExternalServiceAccountsURI
  • Type: String
  • Format: uri
Manager The name of the person who is the manager or supervisor of the user.
  • Field Name: Manager
  • Type: String
Call Answer Timeout The number of rings to wait for a subscriber destination to answer before the call is forwarded to the subscriber's primary phone.
  • Field Name: CallAnswerTimeout
  • Type: Integer
Volume The audio volume expressed as a percentage that Cisco Unity Connection uses to play back message.
  • Field Name: Volume
  • Type: Integer
Say Total Saved A flag indicating whether Cisco Unity Connection announces the total number of saved messages in the subscriber mailbox.
  • Field Name: SayTotalSaved
  • Type: Boolean
Receive Quota The mailbox size (in bytes) receive limit.
  • Field Name: ReceiveQuota
  • Type: Integer
Cos URI
  • Field Name: CosURI
  • Type: String
  • Format: uri
Localization Key Localization Key.
  • Field Name: LocalizationKey
  • Type: String
Class of Service The name of the Class of Service object with which this user account is associated.
  • Field Name: CosObjectId
  • Type: String
  • Target: device/cuc/Cos
  • Target attr: ObjectId
  • Format: uri
Say Message Length A flag indicating whether Cisco Unity Connection announces the length of each message during message playback.
  • Field Name: SayMessageLength
  • Type: Boolean
List In Directory A flag indicating whether Cisco Unity Connection should list the subscriber in the phone directory for outside callers.
  • Field Name: ListInDirectory
  • Type: Boolean
Callhandler URI
  • Field Name: CallhandlerURI
  • Type: String
  • Format: uri
Say Alt Greet Warning A flag indicating whether Cisco Unity Connection notifies the subscriber when they login via the phone (plays conversation) or CPCA (displays a warning banner) if their alternate greeting is turned on.
  • Field Name: SayAltGreetWarning
  • Type: Boolean
User Template Message Action URI The URI to change MessageAction of the template.
  • Field Name: UserTemplateMessageActionURI
  • Type: String
Alias * The unique text name for either a user, distribution list, or personal group.
  • Field Name: Alias
  • Type: String
Prompt Volume The volume level for playback of system prompts.
  • Field Name: PromptVolume
  • Type: Integer
Tenant The name of the tenant to which the user belongs.
  • Field Name: TenantObjectId
  • Type: String
  • Target: device/cuc/Tenant
  • Target attr: ObjectId
  • Format: uri
Say Total Draft Msg A flag indicating whether Cisco Unity Connection announces the total number of draft messages in the subscriber mailbox
  • Field Name: SayTotalDraftMsg
  • Type: Boolean
Say Total New A flag indicating whether Cisco Unity Connection announces the total number of new messages in the subscriber mailbox.
  • Field Name: SayTotalNew
  • Type: Boolean
Say Total New Email A flag indicating whether Cisco Unity Connection announces the total number of new e-mail messages in the subscriber mailbox.
  • Field Name: SayTotalNewEmail
  • Type: Boolean
Speech Incomplete Timeout Specifies the required length of silence (in milliseconds) from when the speech prior to the silence matches an active grammar, but where it is possible to speak further and still match the grammar. By contrast, the SpeechCompleteTimeout property is used when the speech prior to the silence matches an active grammar and no further words can be spoken. A long SpeechIncompleteTimeout value delays the result completion and therefore makes the system's response slow. A short SpeechIncompleteTimeout value may lead to the inappropriate break up of an utterance. The SpeechIncompleteTimeout value is usually longer than the completetimeout value to allow users to pause mid-utterance (for example, to breathe). Note that values set for the completetimeout property are only supported if they are less than the incompletetimeout property. See Appendix D?Timing properties of the VoiceXML Specification for details.
  • Field Name: SpeechIncompleteTimeout
  • Type: Integer
Use Dynamic Name Search Weight Use dynamic name search weight. When this user addresses objects, the name search weight for those objects will automatically be incremented.
  • Field Name: UseDynamicNameSearchWeight
  • Type: Boolean
Ldap Ccm Pkid The pkid of associated end user in the sleeping SeaDragon database.
  • Field Name: LdapCcmPkid
  • Type: String
Send Message On Hangup An enum indicating when hanging up while addressing a message that has a recording and at least one recipient, whether the message is discarded, sent or saved as a draft message if the subscriber explicitly issues the command to send the message either via DTMF or voice input.
  • Field Name: SendMessageOnHangup
  • Type: Integer
  • Choices: ["Discard", "Send", "Save"]
Say Ani After This flag works exactly the same as the SayAni flag on a user, except the conversation plays the ani in the message footer.
  • Field Name: SayAniAfter
  • Type: Boolean
Is Clock Mode24Hour The time format used for the message timestamps that the subscriber hears when they listen to their messages over the phone.
  • Field Name: IsClockMode24Hour
  • Type: Boolean
Use Short Poll For Cache A flag indicating whether the user's polling cycle for retrieving calendar information will be the shorter "power user" polling cycle.
  • Field Name: UseShortPollForCache
  • Type: Boolean
Record Unknown Caller Name A flag indicating whether a caller should be promoted to record his/her name if Unity does not receive caller id.
  • Field Name: RecordUnknownCallerName
  • Type: Boolean
Fax Server URI
  • Field Name: FaxServerURI
  • Type: String
  • Format: uri
Billing Id Accounting information or project code associated with this user.
  • Field Name: BillingId
  • Type: String
Search By Name Search Space The name of the SearchSpace which is used to limit the visibility to dialable/addressable objects when searching by name (character string).
  • Field Name: SearchByNameSearchSpaceObjectId
  • Type: String
  • Target: device/cuc/SearchSpace
  • Target attr: ObjectId
  • Format: uri
Deleted Message Sort Order The order in which Cisco Unity Connection presents deleted messages to the subscriber.
  • Field Name: DeletedMessageSortOrder
  • Type: Integer
Speech Speed Vs Accuracy Tunes the engine towards Performance or Accuracy. A higher value for this setting means faster matches that may be less accurate. A lower value for this setting means more accurate matches along with more processing and higher CPU utilization.
  • Field Name: SpeechSpeedVsAccuracy
  • Type: Integer
Use Default Language Set to true (1) if call handler is using default language from the location it belongs to.
  • Field Name: UseDefaultLanguage
  • Type: Boolean
Speed The audio speed Cisco Unity Connection uses to play back messages to the subscriber.
  • Field Name: Speed
  • Type: Integer