[Index]
To access the latest documentation, go to Documentation and Resources at: https://voss.portalshape.com
Before You Begin
Create a self-signed or third-party-signed system certificate before you configure self-service SSO. For more information, see SSO Certificate Management.
The VOSS Automate server and the IdP (identify provider) server must be configured so that their clocks are synchronized.
Follow these steps to configure self-service Single Sign-On (SSO) for VOSS Automate. The configuration applies to the customers and customer administrators associated with the IdP.
Note
Administrators are configured for SSO use via the Users form (default menu User Management > Users).
Procedure
Log in to VOSS Automate as hcsadmin.
Choose Single Sign On > SSO SP Settings.
Click Add.
Note: Configure only one instance of SSO SP Settings.
On the Base tab, from the mandatory System Certificate drop-down, choose the System Certificate to use. To allow the SSO SP Setting to expire, enter a number of hours in the Validity (Hours) field.
Note:
On the SAML SP Settings tab, enter the mandatory FQDN of the Server.
Note
The FQDN of the Server is stored in the SP metadata that is uploaded to the IdP.
The SSO login URL then contains the fully qualified domain name (FQDN) :
https://<FQDN of the Server>/sso/<login_URI>/login
If you have configured a custom hostname for SSO user login, enter it here.
Upon login, the IdP will redirect you to this FQDN.
Select the Sign Authn Requests and Want Assertions Signed check boxes as required by your security environment.
Note that if a secure connection is required with the secure attribute set on the cookies, the URL values for bindings of End Points must be specified with https.
Click Save.
To view the location of the VOSS Automate SP metadata that you will upload to the IdP, choose Single Sign On > SSO SP Metadata. Point your browser to the URL shown here, and then save a copy of the SP metadata.
Upload the SP metadata to the IdP.
Refer to your IdP documentation for details on configuring SSO on your IdP.
Note:
The IdP must release the UID and map it to an appropriate attribute. For example, an IdP that authenticates with Active Directory can map the uid SAML attribute to sAMAccountName in the Active Directory server.
Download the IdP metadata from the IdP server.
Refer to your IdP documentation for details on downloading IdP metadata.
Note:
If an expired SSO certificate is being renewed and the IdP metadata has not changed, then the download, configure and upload of the IdP metadata is not required.
Log in as provider, reseller, or customer administrator, depending on your IdP configuration level.
Choose Administration Tools > File Management and upload the IdP metadata.
Choose Single Sign On > SSO Identity Provider.
Click Add to add the SSO Identity Provider configuration.
Note: Only one instance of an SSO Identity Provider can be configured for a hierarchy node.
On the SSO Identity Provider screen, complete at minimum, the mandatory SSO Identity Provider fields (see SSO Identity Provider fields).
Click Save to save the SSO Identity Provider Configuration and enable SSO if selected.
Choose User Management > Users and filter on Auth Method equals SSO to display enabled SSO users.
Use this URL for your SSO login:
https://<FQDN of the Server>/sso/<login_URI>/login
Upon login, the IdP will redirect you to this FQDN.
SSO Identity Provider Fields
Field | Description |
---|---|
Entity Id * | Entity ID of the IdP. This can be extracted from the IdP metadata file. This field is mandatory. |
Login URI * | Login URI for the IdP. This is the URI that will be embedded in SSO Login URL. It can contain only alphanumeric characters and forward slashes. This field is mandatory. |
Local Metadata File * | Choose the IdP metadata file. This field is mandatory and must be unique across the system. |
SSO Enabled | Select the check box to enable SSO for users synced in or created at the current hierarchy level. Clear this check box to disable SSO for the users associated with the defined IdP. |
Note | Reminder to upload the IdP metadata file |
SSO Login URL | Read-only field displays the SSO Login URL to use. |
Integrating with an SSO Identity Provider
This procedure configures integration with a SSO identity provider (IdP).
Log in as Provider, Reseller, or Customer administrator (depending on your IdP configuration level).
Choose Administration Tools > File Management and upload the IdP metadata.
Choose Single Sign On > SSO Identity Provider.
Click Add to add the SSO Identity Provider configuration.
Note
Only one instance of an SSO Identity Provider can be configured for a hierarchy node.
On the SSO Identity Provider screen, complete at least the mandatory fields (Entity ID, Login URI, Local Metadata File, User lookup field at minimum, the mandatory SSO Identity Provider fields (see SSO Identity Provider fields):
If a customer is using a custom domain, the Service Provider Domain Name is filled in at the hierarchy level and the login and metadata URLs used will be tied to the IdP as follows:
SSO Login URL: ``https://<Service Provider Domain Name>/sso/<Login URI>/login`` Admin Portal: ``https://<Service Provider Domain Name>/admin/sso/<Login URI>/login``
The metadata is obtained from: https://<Service Provider Domain Name>/sso/<Login URI>/metadata
If the Service Provider Domain Name is specified, the metadata XML file from VOSS-4UC then contains Service.Provider.Domain.Name in the assertion consumer service URL as shown in the example below:
<md:AssertionConsumerService Binding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" Location="https://Service.Provider.Domain.Name/sso/acs/" index="1"/>
This metadata needs to be uploaded to the IdP (not the generic metadata obtained from SSO Service Provider Configuration).
Important
If you have previously uploaded metadata to the IDP and you subsequently complete this Service Provider Domain Name field, you need to remove the previous record from the IDP and re-upload the metadata so that it contains this field.
Click Save to save the SSO Identity Provider Configuration and enable SSO if selected.
Choose User Management > Users and filter on Auth Method equals SSO to display enabled SSO users.
When the Service Provider Domain Name is not specified for a given IDP, these URLs are used for SSO login:
SSO Login URL: ``https://<FQDN of the Service Provider>/sso/<login_URI>/login`` Admin Portal: ``https://<FQDN of the Service Provider>/admin/sso/<Login URI>/login``
See SAML SP Settings FQDN in SSO SP Settings.
The IdP redirects to this FQDN on login.
Note
While an IdP may exist at more than one hierarchy in VOSS Automate, a user will only be permitted to log in if the user exists at or below the hierarchy of a single IdP.
SSO Identity Provider: Field Reference
Field | Description |
---|---|
Entity Id | Mandatory. Entity ID of the IDP. This field must exactly match the entity ID in the IdP metadata file. |
Login URI | Mandatory. Login URI for the IDP. This is the URI that will be embedded in SSO Login URL. It can contain only alphanumeric characters and forward slashes. |
Service Provider Domain Name | The FQDN that will be embedded in the SP metadata for this IdP for URLs that refer back to the Service Provider. |
Local Metadata File | Mandatory. Choose the IdP metadata file. This field must be unique across the system. |
SSO Enabled | Select the check box to enable SSO for users synced in or created at the current hierarchy level. Clear this check box to disable SSO for the users associated with the defined IDP. |
Note | Reminder to upload the IdP metadata file |
SSO Login URL | Read-only field displays the SSO Login URL to use. Users with selfservice role and no Authorized Admin Hierarchy will be redirected to Self-service. |
Admin SSO Login URL | Read-only. Displays the new Admin Portal SSO Login URL to use. |
Business Admin SSO Login URL | Read-only. Displays the new Business Admin Login URL to use. From release 21.4, this will always redirect to the new Admin Portal. |
User lookup field | Mandatory. Select the field to bind the VOSS and SSO user - typically username. |
Authentication Scope | Hierarchical scope this server applies to.
|
User sync type | Type of users that can authenticate against this server.
|
For Authentication Scope, also see User Login Options by Authentication Method and Server Authentication Scope.
SSO Scenarios for User Roles
The table below shows the interface a user will be directed to when using a specific SSO URL, according to the user's role: either single role or multiple role (includes Authorized Admin Hierarchy).
User Role | Auth Admin? | URL used | UI (Session Limiting) | Expected Behavior |
---|---|---|---|---|
selfservice | Yes | https:/<hostname>/sso/<login-uri>/login | administrator | Redirect to Classic Admin |
selfservice | Yes | https:/<hostname>/admin/sso/<login-uri>/login | administrator | Redirect to Admin |
selfservice | No | https:/<hostname>/sso/<login-uri>/login | selfservice | Redirect to Self-service |
administration | Yes | https:/<hostname>/sso/<login-uri>/login | administrator | Redirect to Classic Admin |
administration | Yes | https:/<hostname>/admin/sso/<login-uri>/login | administrator | Redirect to Admin |
administration | No | https:/<hostname>/sso/<login-uri>/login | administrator | Redirect to Classic Admin |
administration | No | https:/<hostname>/admin/sso/<login-uri>/login | administrator | Redirect to Admin |
Administrators set up with SSO but who have multiple user roles and who wish to access the Self-service interface must navigate to the Self-service portal URL upon login:
https://<Hostname>/selfservice/#/
HcsSpMetadataDAT
Title | Description | Details | |||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Note |
|
||||||||||||||||||||||||||||||||||||||||||||||||
Metadata URL | The URL to SSO SP metadata |
|