Quick Add SIP Gateway allows you to configure a new SIP gateway at the site level, with minimum details. Saving the form triggers a background process that uses the information you provide, along with configuration templates, and automatically creates the required elements at the correct hierarchies:

Note

Quick Add SIP Gateway does not support incremental configuration of the gateway. Activities such as adding additional ports must be done via the appropriate menus.
While the Quick Add SIP Gateway tool automates the creation and configuration of elements required for the SIP gateway at the customer and site level, you can manually create these elements, if required. For example, to associate an unused or old gateway that was previously associated with a site, to a new site.

In this case, you would need to add these elements at customer and site hierarchies, as follows:
- At customer level:
  - Add the IOS device
  - Add the SIP trunk
  - Add the SIP LBO gateway
- At the site level:
  - Associate the gateway to the site
  - Add the E1/T1 ports (optional)

Model Details: view/GS_IOSGateway_QuickAdd_View

An asterisk * in the title indicates the field is mandatory.
If a field has a default value, it is shown in the Description column.
If the field type is an array, the Field Name has a .[n] suffix, where n is the array index placeholder.
Object and array field names are listed to provide context. If a field belongs to an object or an array, the full field name is shown in dot separated notation.

Title			Description	Details
IOS Device Name *				Field Name: iosName Type: String
IOS Device Description				Field Name: iosDescription Type: String
Prime Collaboration				Field Name: iosPrimeCollab Type: String
	Network Addresses			Field Name: networkAddresses.[n] Type: Array
		Address Space *		Field Name: networkAddresses.[n].addressSpace Type: String Choices: ["APPLICATION_SPACE", "SERVICE_PROVIDER_SPACE", "CUSTOMER_SPACE"]
		IPv4 Address *		Field Name: networkAddresses.[n].iPAddrV4 Type: String Format: ip-address
		Description		Field Name: networkAddresses.[n].description Type: String
		Domain		Field Name: networkAddresses.[n].domain Type: String
		Hostname		Field Name: networkAddresses.[n].hostname Type: String
	Credentials			Field Name: credentials.[n] Type: Array
		Credential Type *		Field Name: credentials.[n].credentialType Type: String Choices: ["SNMP_V2", "SNMP_V3", "CLI"]
		UserId *		Field Name: credentials.[n].userid Type: String
		Password *		Field Name: credentials.[n].password Type: String Is Password: True
		Access Type	Default: RO	Field Name: credentials.[n].accessType Type: String Default: RO Choices: ["RO", "RW"]
		Description		Field Name: credentials.[n].description Type: String
SIP trunk template *				Field Name: sipTrunkTemplate Type: String
SIP Gateway name *				Field Name: sipGatewayName Type: String
SIP Gateway Description				Field Name: sipGatewayDescription Type: String
Country				Field Name: country Type: String
Run On Every Node			Default: true	Field Name: runOnEveryNode Type: Boolean Default: true
Enable Command Builder			Default: true	Field Name: enableCommandBuilder Type: Boolean Default: true
Override Voice Translation Limit				Field Name: overrideVoiceTranslationLimit Type: Boolean
	T1/E1 Ports			Field Name: ports.[n] Type: Array
		Port Number *	e.g. 1/0/0	Field Name: ports.[n].portNumber Type: String
		Description		Field Name: ports.[n].description Type: String
		Port Template *		Field Name: ports.[n].portTemplate Type: String

SIP Gateway Name	Mandatory.
Run On Every Node	Enabled by default. Defines whether the Unified CM hosts the trunk everywhere.
Enable Command Builder	Enabled by default.

Model: view/GS_IOSGateway_QuickAdd_View

Quick Add SIP Gateway

Model Details: view/GS_IOSGateway_QuickAdd_View