Update a SIP Local Gateway -------------------------- This procedure updates a SIP Local Gateway. You can also perform this task if you have updated the SIP Trunk associated with the SIP Local Gateway. **Perform these steps**: 1. Log in as provider, reseller, or customer administrator. 2. Set the hierarchy path to the customer whose SIP Local Gateway you are updating. 3. Choose **Apps Managment > IOS > SIP Local Gateways**. 4. Click the SIP Local Gateway to update. 5. On the **SIP Local Gateways** screen you can update only the following fields: +------------------------+-------------------------------------------+ | Field | Description | +========================+===========================================+ | Name | Enter a name for the SIP Local Gateway. | | | This field is mandatory. | +------------------------+-------------------------------------------+ | Description | Enter a description for the SIP Local | | | Gateway. | +------------------------+-------------------------------------------+ | Enable Command Builder | Select this check box to have Command | | | Builder generate commands when SIP Local | | | Gateway is added, deleted, or modified. | +------------------------+-------------------------------------------+ However, you can update the SIP Trunk in **Apps Management > CUCM > SIP Trunks**. 6. Click **Save**. * If you changed the SIP Local Gateway name, the Gateway Name for generated commands is updated in the IOS Commands log. * If the **Run on Every Node** check box is selected for SIP Trunk, the HcsUpdateSipLocalGw1EVT and HcsUpdateSipLocalGw1EVT events are generated. If the **Enable Command Builder** check box is selected, the IOS Command Builder generates the default IOS commands associated with the events.