To view and update information related to Microsoft Teams dial plans, go to (default menu) MS Teams Dial Plan Management, and select the relevant menu:

An asterisk * in the title indicates the field is mandatory.
If a field has a default value, it is shown in the Description column.
If the field type is an array, the Field Name has a .[n] suffix, where n is the array index placeholder.
Object and array field names are listed to provide context. If a field belongs to an object or an array, the full field name is shown in dot separated notation.

Title	Description	Details
Bypass Mode	Possible values are "None", "Always" and "OnlyForLocalUsers". By setting "Always" mode you indicate that your network is fully routable. If a user usually in site "Seattle", travels to site "Tallinn" and tries to use SBC located in Seattle we will try to deliver the traffic to Seattle assuming that there is connection between Tallinn and Seattle offices. With "OnlyForLocaUsers" you indicate that there is no direct connection between sites. In example above, the traffic will not be send directly from Tallinn to Seattle.	Field Name: BypassMode Type: ["String", "Null"] Choices: ["None", "Always", "OnlyForLocalUsers"]
Description		Field Name: Description Type: ["String", "Null"]
Enabled	Used to enable this SBC for outbound calls. Can be used to temporarily remove the SBC from service while it is being updated or during maintenance. Note if the parameter is not set the SBC will be created as disabled (default value -Enabled $false).	Field Name: Enabled Type: Boolean
Failover Response Codes	Comma separated numbers between 400 and 599	Field Name: FailoverResponseCodes Type: String
Failover Time Seconds	When set to 10 (default value), outbound calls that are not answered by the gateway within 10 seconds are routed to the next available trunk; if there are no additional trunks, then the call is automatically dropped. In an organization with slow networks and slow gateway responses, that could potentially result in calls being dropped unnecessarily. The default value is 10.	Field Name: FailoverTimeSeconds Type: Integer
Forward Call History	Indicates whether call history information will be forwarded through the trunk. If enabled, the Office 365 PSTN Proxy sends two headers: History-info and Referred-By. The default value is False ($False).	Field Name: ForwardCallHistory Type: Boolean
Forward PAI	Indicates whether the P-Asserted-Identity (PAI) header will be forwarded along with the call. The PAI header provides a way to verify the identity of the caller. The default value is False ($False). Setting this parameter to $true will render the from header anonymous, in accordance of RFC5379 and RFC3325.	Field Name: ForwardPai Type: Boolean
FQDN	Fully qualified domain name	Field Name: Fqdn Type: String
Gateway LBR Enabled User Override		Field Name: GatewayLbrEnabledUserOverride Type: Boolean
Gateway Site ID	PSTN Gateway Site ID.	Field Name: GatewaySiteId Type: String
Gateway Site LBR Enabled	Used to enable this SBC to report assigned site location. Site location is used for Location Based Routing. When this parameter is turned on, the SBC will report the site name as defined by tenant administrator. On incoming call to a Teams user the value of the site assigned to the SBC is compared with the value of the site assigned to the user to make a routing decision. The parameter is mandatory for enabling Location Based Routing feature. The default value is False ($False).	Field Name: GatewaySiteLbrEnabled Type: Boolean
Name *	The parameter is mandatory when modifying an existing SBC.	Field Name: Identity Type: String
Inbound PSTN Number Translation Rules	Creates an ordered list of Teams translation rules, that apply to PSTN number on inbound direction.	Field Name: InboundPstnNumberTranslationRules Type: ["Array", "Null"]
Inbound Teams Number Translation Rules	This parameter assigns an ordered list of Teams translation rules, that apply to Teams numbers on inbound direction.	Field Name: InboundTeamsNumberTranslationRules Type: ["Array", "Null"]
Max Concurrent Sessions	Used by the alerting system. When any value is set, the alerting system will generate an alert to the tenant administrator when the number of concurrent session is 90% or higher than this value. If this parameter is not set, the alerts are not generated. However, the monitoring system will report the number of concurrent sessions every 24 hours.	Field Name: MaxConcurrentSessions Type: ["Integer", "Null"]
Media Bypass	Parameter indicated of the SBC supports Media Bypass and the administrator wants to use it for this SBC.	Field Name: MediaBypass Type: Boolean
Media Relay Routing Location Override	This parameter is reserved for use with managed carriers. Allows selecting path for media manually. Direct Routing assigns a datacenter for media path based on the public IP of the SBC. We always select closest to the SBC datacenter. However, in some cases a public IP from for example a US range can be assigned to an SBC located in Europe. In this case we will be using not optimal media path. This parameter allows manually set the preferred region for media traffic. We only recommend setting this parameter if the call logs clearly indicate that automatic assignment of the datacenter for media path does not assign the closest to the SBC datacenter	Field Name: MediaRelayRoutingLocationOverride Type: ["String", "Null"]
Outbound PSTN Number Translation Rules	Assigns an ordered list of Teams translation rules, that apply to PSTN number on outbound direction.	Field Name: OutboundPstnNumberTranslationRules Type: ["Array", "Null"]
Outbound Teams Number Translation Rules	Assigns an ordered list of Teams translation rules, that apply to Teams numbers on outbound direction.	Field Name: OutboundTeamsNumberTranslationRules Type: ["Array", "Null"]
PIDF-LO Supported	Enables PIDF-LO support on the PSTN Gateway. If turned on the .xml body payload is sent to the SBC with the location details of the user.	Field Name: PidfLoSupported Type: Boolean
Proxy SBC		Field Name: ProxySbc Type: ["String", "Null"]
Send SIP Options	Defines if an SBC will or will not send the SIP options. If disabled, the SBC will be excluded from Monitoring and Alerting system. We highly recommend that you enable SIP options. Default value is True.	Field Name: SendSipOptions Type: Boolean
SIP Signaling Port *	Listening port used for communicating with Direct Routing services by using the Transport Layer Security (TLS) protocol. The value must be between 1 and 65535.	Field Name: SipSignalingPort Type: Integer

Model: device/msteamsonline/CsOnlinePstnGateway

Tenant Dialplan

Model Details: device/msteamsonline/CsOnlinePstnGateway