.. _add_hunt_group: Add, Edit, and Delete Hunt Groups ---------------------------------- .. _18.1-Patch-Bundle-3|EKB-796: .. _19.1.1|EKB-943: .. _19.3.4-PB4|EKB-5139: .. _21.2|EKB-9594: Add a Hunt Group ................. This procedure adds a hunt group in VOSS Automate and Cisco Unified Call Manager (CUCM). .. note:: When adding a hunt group, you will specify the parameters of the hunt pilot and the hunt list, and choose one or more new or existing line groups. If your administrator has enabled number inventory, you can choose the hunt pilot pattern from a list of available numbers. If number inventory is disabled, you will need to specify a hunt pilot pattern, or choose from a limited selection of available numbers. To allow the successful use of call forwarding in a hunt pilot, clear the defaults for **Max Callers In Queue** (``32``) and the default for **Max Wait Time In Queue** (``900``). To use queuing instead of call forwarding, change the default values, for example, to 33 and 901. **To add a hunt group**: 1. Log in as site administrator or higher. #. Choose the hierarchy (if necessary) where you want to add the hunt group. .. note:: Hunt groups can be configured at the customer level or at site level. #. Go to (default menus) **Subscriber Management > Hunt Groups**. #. On the **Hunt Groups** list view, click **Add**. #. Choose a network device list (NDL). .. note:: For hunt groups configured at the customer level: * Choose a NDL that identifies the CUCM where the hunt group is defined. * The system supports adding duplicate hunt groups (two hunt groups with the same hunt list name), provided multi-cluster CUCM is configured and you choose a different NDL. The second hunt group and hunt list are added to the second CUCM. #. On the **Hunt Groups/New Record** page, fill out at least the required fields. #. Click **Save**. A workflow is triggered to add the new hunt group: * A hunt list is added with the details you configured. * A hunt pilot is added with the details you configured. * One or more line groups are created with the specified directory numbers as members. Configure the New Hunt Group .............................. This section describes the configuration options when adding a hunt group. You will need to configure the following sections of the **Hunt Groups/New Record** page: * Pattern Definition * Forward Hunt No Answer * Forward Hunt Busy * Queueing * Park Monitoring * Calling Party Transformations * Connected Party Transformations * Called Party Transformations * AAR Group Settings * Hunt List * Line Groups and Line Group Members Configure Pattern Definition '''''''''''''''''''''''''''''''' For hunt groups configured at the customer level, define a unique hunt pilot pattern. The hunt pilot pattern is added to the customer-level DN inventory and is marked as in-use and unavailable. .. tabularcolumns:: |p{7cm}|p{8cm}| +-------------------------------+---------------------------------------------------------------------+ | Field | Description | +===============================+=====================================================================+ | Hunt Pilot Pattern | Specify a hunt pilot pattern, or choose one from the the drop-down. | | | | | | A hunt pilot pattern can include numbers and wildcards (no spaces). | | | wildcards (no spaces). For example, for NANP, enter 9.@ for | | | typical local access, or 8XXX for a typical private network | | | numbering plan. Valid characters include uppercase characters A, B, | | | C, D, and \+ (representing the international escape character +). | | | Ensure that the directory hunt pilot, which uses the chosen | | | partition, route filter, and numbering plan combination, is unique. | +-------------------------------+---------------------------------------------------------------------+ | Route Partition | Choose a route partition from the list if you want to use a | | | partition to restrict access to the hunt pilot, else, leave the | | | field blank. | +-------------------------------+---------------------------------------------------------------------+ | Route Filter | If your hunt pilot includes the '@' wildcard, choose a route filter | | | from the drop-down. Route filters restrict some number patterns. | | | The numbering plan you choose determines the route filters you can | | | choose from. | +-------------------------------+---------------------------------------------------------------------+ | Hunt List | Add the hunt list name to the **Name** field in the **Hunt List** | | | section to auto-populate this field. | +-------------------------------+---------------------------------------------------------------------+ | Call Pickup Group | Choose a call pickup group to associate with this hunt group. | | | | | | Choose a call pickup group at the same hierarchy as this hunt group | | | or if no call pickup groups are available at this hierarchy, choose | | | a call pickup group at the hierarchy directly above. | | | | | | Call pickup group is the number that can be dialed to answer calls | | | to this directory number (in the partition) | +-------------------------------+---------------------------------------------------------------------+ | Alerting Name | Specify an alerting name for the hunt pilot in UNICODE format. | | | | | | This name is displayed on phones that the hunt pilot dials when it | | | receives an incoming call, along with calling party information. | | | Phone users can use this information to answer the call | | | This name also displays on the calling phone. | | | | | | If you don't enter a name, the hunt pilot DN displays on the | | | phones. | +-------------------------------+---------------------------------------------------------------------+ | Provide Outside Dial Tone | Enable for each hunt pilot that routes the call off the local | | | network and provides outside dial tone to the calling device. | | | Disable if you want to route the call in the network. | +-------------------------------+---------------------------------------------------------------------+ Configure Forward Hunt No Answer '''''''''''''''''''''''''''''''''' 1. At **Forward Hunt No Answer Action**, choose the hunt call treatment action setting. * Choosing **Forward Unanswered Calls to Destination** enables these fields: ================= ==================================================================================== CFNA Destination Defines the directory number where calls are to be forwarded. CSS CFNA Applies to all devices using this directory number. The drop-down displays all CSSs in the system. The default is the default line CSS of the site. ================= ==================================================================================== * Choose **Use Forward Settings of Device that Forwarded to Hunt Pilot** to use the call forwarding settings of the line group member. 2. At **Maximum Hunt Timer**, specify the maximum time for hunting without queueing. .. note:: Do not use the same value for this field and for the **RNA Reversion Timeout** field in the associated line group. Configure Forward Hunt Busy '''''''''''''''''''''''''''''' At **Forward Hunt Busy Action**, choose the hunt call treatment action setting. * Choosing **Forward Busy Calls to Destination** enables these fields: ================= ==================================================================================== CFB Destination Defines the directory number where calls are to be forwarded. CSS CFB Applies to all devices using this directory number. The drop-down displays all CSSs in the system. The default is the default line CSS of the site. ================= ==================================================================================== * Choose **Use Forward Settings of Device that Forwarded to Hunt Pilot** to use the call forwarding settings of the line group member. Configure Queueing '''''''''''''''''' At **Queueing**, define whether to queue calls. Selecting this checkbox disables Forward Hunt Groups, and displays additional configuration options. .. note:: These mandatory fields are auto-populated with default values: * Maximum Number of Callers Allowed in Queue: ``32`` * Maximum Wait Time in Queue: ``900`` Configure Hunt List ''''''''''''''''''''''' .. tabularcolumns:: |p{7cm}|p{8cm}| +---------------------------------------------+---------------------------------------------------------------------+ | Field | Description | +=============================================+=====================================================================+ | Name | Maximum of 50 alphanumeric characters, and can contain combination | | | of spaces, periods (.), hyphens (-), and underscore characters (_). | | | Ensure each hunt list name is unique to the route plan. it is | | | recommended that you use short, descriptive names for your hunt | | | lists. The CompanynameLocationCalltype format provides enough | | | detail and is short enough so you can easily identify a hunt list. | +---------------------------------------------+---------------------------------------------------------------------+ | Cisco Unified Communications Manager Group | Choose a CUCM group from the list. The hunt list registers to the | | | first node in the CUCM group. Choosing a CUCM with only one node | | | configured triggers a system warning, so choose a group with more | | | than one node. | +---------------------------------------------+---------------------------------------------------------------------+ | Enable this Hunt List | Defines whether to enable your hunt list as soon as you save. No | | | system reset is required. | +---------------------------------------------+---------------------------------------------------------------------+ | For Voice Mail Usage | Define whether to use this hunt list for voicemail. Enabling this | | | setting allows the route list control process to keep a count of | | | the setups that are being served to the hunt list, and will not | | | allow more setups than the number of available devices. As a | | | result, each device in the hunt list is treated as if it has a | | | Busy Trigger and related Maximum Number of Calls of one. | +---------------------------------------------+---------------------------------------------------------------------+ Configure Line Groups '''''''''''''''''''''' Although you can configure an empty line group with no members (directory numbers), CUCM does not support this configuration for routing calls. If the line group contains no members, the hunt list stops hunting when the call gets routed to the empty line group. To avoid this scenario, ensure you configure at least one member in the line group. You must define one or more directory numbers before configuring a line group. You can remove members from the line group after you configure or update the line group. .. note:: For hunt groups configured at the customer-level, include lines defined at the customer level, and at any site within the customer. .. tabularcolumns:: |p{7cm}|p{8cm}| +------------------------------------------------+---------------------------------------------------------------------+ | Field | Description | +================================================+=====================================================================+ | Line Group Name | The drop-down displays all line groups available at the site. You | | | can choose a line group from the list or enter a name for the line | | | group in the field. | | | | | | Names you add can be up to 50 alphanumeric characters and can | | | contain any combination of spaces, periods (.), hyphens (-), and | | | underscore characters (_). Ensure that each line group name is | | | unique to the route plan. | | | | | | It is recommended that you use a short, descriptive name for your | | | line groups. The CompanynameLocationGroup format usually provides a | | | sufficient level of detail, and is short enough to be easily | | | identified. | +------------------------------------------------+---------------------------------------------------------------------+ | RNA Reversion Timeout | Specify a time, in seconds, after which CUCM will distribute a call | | | to the next available or idle member of this line group or to the | | | next line group if the call is not answered, and if the following | | | option is chosen for Hunt Options No Answer: *Try next number; then | | | try next group in Hunt List* | | | | | | The RNA Reversion Timeout applies at the line-group level to all | | | members. | +------------------------------------------------+---------------------------------------------------------------------+ | Hunt Options No Answer | Choose a hunt option for CUCM to use if a call is distributed to a | | | member of a line group that does not answer. This option is applied | | | at the member level. | +------------------------------------------------+---------------------------------------------------------------------+ | Automatically Logout Hunt Member on No Answer | Defines whether line members are automatically logged off the hunt | | | list. Line members can log back in using the "HLOG" softkey or PLK. | +------------------------------------------------+---------------------------------------------------------------------+ | Hunt Options Busy | Choose a hunt option for CUCM to use if a call is distributed to a | | | member of a line group that is busy. | +------------------------------------------------+---------------------------------------------------------------------+ | Hunt Options Not Available | Choose a hunt option for CUCM to use if a call is distributed to an | | | unavailable line group member. The *Not Available* | | | condition occurs when none of the phones that are associated with | | | the DN in question is registered. Not Available also occurs when | | | extension mobility is in use and the DN/user is not logged in. | +------------------------------------------------+---------------------------------------------------------------------+ Configure Line Group Members '''''''''''''''''''''''''''''' To configure line group members: * Choose a directory number. * Choose a partition. * Specify a position. Edit a Hunt Group ................... It is possible to edit hunt groups, for example, to add or delete line groups, or to add or delete line group members. When modifying a hunt group, the following workflow is executed (depending on the changes you made): * The line group details are modified. * Any new line groups are added. A removed line group is deleted *only* if it is the last instance. If a shared line group is removed, it is deleted from the specified hunt group *only*, but is still included in other hunt groups that are also using it. If the hunt group uses existing line groups, the existing line groups are updated when the hunt group is modified. * The hunt list is modified. * The hunt pilot is modified. Delete a Hunt Group ..................... When deleting a hunt group, the following workflow is executed: * The line groups that are members of the hunt list are deleted (if they are not used by any other hunt group in the system). If a shared line group is removed, it is deleted from the specified hunt group *only*, but is still included in other hunt groups that are also using it. * The hunt pilot is deleted * The hunt list is deleted