.. _reset_sip_trunks:

Reset SIP Trunks
----------------

This procedure shuts down a SIP trunk and brings it back into
service. This procedure does not physically reset the hardware; it only
re-initializes the configuration that is loaded by the Cisco Unified
Communications Manager (CUCM) cluster. To restart a SIP trunk without shutting it
down, use **Restart SIP Trunks**.

**Perform these steps**:

1. Log in as provider, reseller or customer administrator.
2. Perform one of:

   * If you logged in as Provider or Reseller administrator, go to **Device Management > CUCM > SIP Trunks**.
   * If you logged in as Customer administrator, go to **Device Management > Advanced > SIP Trunks**.
3. From the list of SIP trunks, click the SIP trunk to be reset, then choose **Action > Reset**.