Configure Calling Party Transformation Patterns ----------------------------------------------- The parameters in the Calling Party Transformation Patterns window provide appropriate caller information using the Calling Party Transformation calling search space on the destination device. Be aware that calls through transformation patterns are not routable. When this pattern is matched, the call does not route to any device. You use calling party transformation patterns with the calling party normalization feature. 1. Log in as the Provider, Reseller, or Customer Administrator. 2. Perform one of the following: * If you logged in as the Provider or Reseller Administrator, select# **Device Management > CUCM > Calling Party Transformation Patterns**. * If you logged in as the Customer Administrator, select **Device Management > Advanced > Calling Party Transformation Patterns**. 3. Make sure that the hierarchy path is set to the correct level. 4. Perform one of the following: * To add a new calling party transformation pattern, click **Add**, then go to step 5. * To edit an existing calling party transformation pattern, click on the line item in the table. Go to step 6. 5. In the popup, select from the drop-down the network device list (NDL) to which you are adding the calling party transformation pattern, and click **OK**. .. note:: The NDL popup will only appear when you are adding a new calling party transformation pattern. If you are updating an existing pattern, go to Step 6. If you are adding the calling party transformation pattern to a Site hierarchy node, the NDL popup will not appear. You will go right to the Calling Party Transformation Pattern add tabs using the NDL associated to the site. 6. From the **Pattern Definition** tab, modify the following fields as required. .. tabularcolumns:: |p{4cm}|p{11cm}| +-----------------+------------------------------------------+ | Option | Description | +=================+==========================================+ | Pattern | Enter the transformation pattern, | | (Mandatory) | including numbers and wildcards (do not | | | use spaces); for example, for NANP, | | | enter 9.@ for typical local access or | | | 8XXX for a typical private network | | | numbering plan. Valid characters include | | | the uppercase characters A, B, C, and D | | | and \+, which represents the | | | international escape character +. | | | | | | Note | | | | | | Ensure that the pattern is | | | unique. Check the transformation | | | pattern, route pattern, | | | translation pattern, directory | | | number, call park number, call | | | pickup number, message waiting | | | on/off, or meet me number if you | | | receive an error that indicates | | | duplicate entries. You can also | | | check the route plan report. | | | | | | Default value: None | +-----------------+------------------------------------------+ | Partition | If you want to use a partition to | | | restrict access to the transformation | | | pattern, choose the desired partition | | | from the drop-down list box. | | | | | | Note | | | | | | Configure transformation | | | patterns in different non-null | | | partitions rather than dialing | | | patterns such as route patterns | | | and directory numbers. For | | | transformation pattern lookups, | | | Cisco Unified Communications | | | Manager ignores the patterns in | | | null partitions. | | | | | | Make sure that the combination | | | of pattern, route filter, and | | | partition is unique within the | | | Cisco Unified Communications | | | Manager cluster. | +-----------------+------------------------------------------+ | Description | Enter a description of the | | | transformation pattern. | +-----------------+------------------------------------------+ | Numbering Plan | Choose a numbering plan. | +-----------------+------------------------------------------+ | Route Filter | If your transformation pattern includes | | | the @ wildcard, you may choose a route | | | filter. The optional act of choosing a | | | route filter restricts certain number | | | patterns. | | | | | | The route filters that display depend on | | | the numbering plan that you choose from | | | the Numbering Plan drop-down list box. | +-----------------+------------------------------------------+ | MLPP Preemption | Check this box to make the numbers in a | | Disabled | transformation pattern non-preemptable. | +-----------------+------------------------------------------+ 7. From the **Calling Party Transformations** tab, modify the following fields as required. .. tabularcolumns:: |p{4cm}|p{11cm}| +----------------------+-------------------------------------+ | Option | Description | +======================+=====================================+ | Use Calling Party's | Choose On from the drop-down list | | External Phone | if you want the full external phone | | Number Mask | number to be used for calling line | | | identification (CLID) on outgoing | | | calls. Choose Off or Default if you | | | do not want to use the full | | | external phone number for CLID on | | | outgoing calls. You may also | | | configure an External Phone Number | | | Mask on all phone devices. | +----------------------+-------------------------------------+ | Digit Discards | Choose the discard digit | | | instructions that you want to be | | | associated with this calling party | | | transformation pattern. | +----------------------+-------------------------------------+ | Calling Party | Enter a transformation mask value. | | Transformation Mask | Valid entries include the digits 0 | | | through 9; the wildcard characters | | | X, asterisk (*), and octothorpe | | | (#); and the international escape | | | character +. | | | | | | If the Digit Discards field is | | | blank, the Prefix Digits field is | | | blank, the Calling Party | | | Transformation Mask field is blank, | | | and Use Calling Party's External | | | Phone Number Mask is set to Off or | | | Default, no calling party | | | transformation takes place. | +----------------------+-------------------------------------+ | Prefix Digits | Enter prefix digits in the field. | | | Valid entries include the digits 0 | | | through 9, the wildcard characters | | | asterisk (*) and octothorpe (#), | | | and the international escape | | | character +. | | | | | | Note | | | | | | The appended prefix digit | | | does not affect which | | | directory numbers route to | | | the assigned device. | +----------------------+-------------------------------------+ | Calling Line ID | Cisco Unified Communications | | Presentation | Manager uses calling line ID | | | presentation (CLIP/CLIR) as a | | | supplementary service to allow or | | | restrict the originating caller | | | phone number on a call-by-call | | | basis. | | | | | | Choose whether you want the Cisco | | | Unified Communications Manager to | | | allow or restrict the display of | | | the calling party phone number on | | | the called party phone display for | | | this route pattern. | | | | | | Choose Default if you do not want | | | to change calling line ID | | | presentation. Choose Allowed if you | | | want Cisco Unified Communications | | | Manager to allow the display of the | | | calling number. Choose Restricted | | | if you want Cisco Unified | | | Communications Manager to block the | | | display of the calling number. | +----------------------+-------------------------------------+ .. tabularcolumns:: |p{4cm}|p{11cm}| +----------------------+-------------------------------------+ | Option | Description | +======================+=====================================+ | Calling Party Number | Choose the format for the number | | Type | type in calling party directory | | | numbers. | | | | | | Cisco Unified Communications | | | Manager sets the calling directory | | | number (DN) type. Cisco recommends | | | that you do not change the default | | | value unless you have advanced | | | experience with dialing plans such | | | as NANP or the European dialing | | | plan. You may need to change the | | | default in Europe because Cisco | | | Unified Communications Manager does | | | not recognize European national | | | dialing patterns. You can also | | | change this setting when you are | | | connecting to a PBX that expects | | | the calling directory number to be | | | encoded to a non national type | | | numbering plan. | | | | | | Choose one of the following | | | options: | | | | | | * Cisco CallManager - Use when | | | the Cisco Unified | | | Communications Manager sets the | | | directory number type. | | | * Unknown - Use when the dialing | | | plan is unknown. | | | * National - Use when you are | | | dialing within the dialing plan | | | for your country. | | | * International - Use when you | | | are dialing outside the dialing | | | plan for your country. | | | * Subscriber - Use when you are | | | dialing a subscriber by using a | | | shortened subscriber number. | +----------------------+-------------------------------------+ | Calling Party | Choose the format for the numbering | | Numbering Plan | plan in calling party directory | | | numbers. | | | | | | Cisco Unified Communications | | | Manager sets the calling DN | | | numbering plan. Cisco recommends | | | that you do not change the default | | | value unless you have advanced | | | experience with dialing plans such | | | as NANP or the European dialing | | | plan. You may need to change the | | | default in Europe because Cisco | | | Unified Communications Manager does | | | not recognize European national | | | dialing patterns. You can also | | | change this setting when you are | | | connecting to PBXs by using routing | | | as a non-national type number. | | | | | | Choose one of the following | | | options: | | | | | | * Cisco CallManager - Use when | | | the Cisco Unified | | | Communications Manager sets the | | | Numbering Plan in the directory | | | number. | | | * ISDN - Use when you are dialing | | | outside the dialing plan for | | | your country. | | | * National Standard - Use when | | | you are dialing within the | | | dialing plan for your country. | | | * Private - Use when you are | | | dialing within a private | | | network. | | | * Unknown - Use when the dialing | | | plan is unknown. | +----------------------+-------------------------------------+ 8. Click **Save**. The calling party transformation pattern appears in the list. To modify any of these characteristics, click the item in the list, make your changes, and click **Save**. To delete a calling party transformation pattern, check the box to the left of the Name column in the group list, and click **Delete**.