.. _configure_device_pools: .. rst-class:: chapter-with-expand Configure Device Pools ----------------------- Device pools define sets of common characteristics for devices. The device pool structure supports the separation of user and location information. The device pool contains system, device, and location-related information. After adding a new device pool, you can use it to configure devices such as Cisco Unified IP Phones, gateways, conference bridges, transcoders, media termination points, voice-mail ports, CTI route points, and so on. **Perform these steps**: 1. Log in as provider, reseller, or customer administrator. 2. If you're logged in as: * Provider or reseller administrator: Go to **Apps Management > CUCM > Device Pools**. * Customer administrator: Go to **Apps Management > Advanced > CUCM > Device Pools**. 3. Do you want to ... * Add a new device pool? Click **Add**. On the dialog, choose the network device list (NDL) where you're adding the device pool; then, click **OK**. .. note:: The dialog to choose a NDL does not display if you're adding the device pool instance to to site hierarchy node (you won't need to choose a NDL). In this case, you will add the device pool using the NDL associated with the site. * Edit an existing device pool? Click the line item in the table. Go to step 4. 4. Click through the following tabs to complete at least the mandatory details: * Device Pool Settings tab * Local Route Group Settings tab * Roaming Sensitive Settings tab * Device Mobility Related Information tab * Geolocation Configuration** tab * Incoming Calling Party Settings tab * Incoming Called Party Settings tab * Caller ID for Calls from This Phone tab * Connected Party Settings tab * Redirecting Party Settings tab 5. Click **Save**. The route partition appears in the device pool list. To modify any of these properties, make your changes and click **Save**. To delete a device pool, select the check box adjacent to the **Name** column in the group list, and click **Delete**. .. _device_pool_settings_fields: Device Pool Settings Tab ......................... .. tabularcolumns:: |p{3.5cm}|p{12cm}| +--------------------------+-------------------------------------------+ | Option | Description | +==========================+===========================================+ | | Enter the name of the new device pool | | | that you are creating. You can enter up | | | to 50 characters, which include | | Device Pool Name \* | alphanumeric characters, periods (.), | | | hyphens (-), underscores (_), and blank | | | spaces. | | | | | | Default value: None | +--------------------------+-------------------------------------------+ | | Choose the Cisco Unified Communications | | | Manager group to assign to devices in | | | this device pool. A Unified CM group | | Cisco Unified | specifies a prioritized list of up to | | CM Group \* | three Unified CMs. The first Unified CM | | | in the list serves as the primary one | | | for that group. The other members of | | | the group serve as backup Unified CMs | | | for redundancy. | +--------------------------+-------------------------------------------+ | | Choose the calling search space to | | | assign to devices in this device pool | | Calling Search Space for | that auto-register with Unified CM. The | | Auto-registration | calling search space specifies | | | partitions that devices can search when | | | attempting to complete a call. | +--------------------------+-------------------------------------------+ | | From the drop-down list, choose an | | | existing Calling Search Space (CSS) to | | | use for the devices in this device | | | profile as an adjunct CSS for the | | | Extension Mobility Cross Cluster (EMCC) | | | feature. To configure a new CSS or | | | modify an existing CSS, choose **Call | | | Routing > Class of Control > Calling | | | Search Space** in Unified CM | | | Administration. | | | | | Adjunct CSS | When configuring the EMCC feature, the | | | administrator must configure a device | | | pool for each remote cluster. If the | | | remote cluster is located in a | | | different country, the adjunct CSS must | | | embrace the partition with which the | | | emergency patterns of that country | | | associate. This configuration | | | facilitates country-specific emergency | | | call routing. | | | | | | Default value: None | +--------------------------+-------------------------------------------+ | | Choose a clusterwide priority setting | | | for reverted calls that the hold | | | reversion feature invokes. This setting | | | specifies which call type, incoming | | | calls or reverted calls, have priority | | | for user actions, such as going off | | | hook. | | | | | | * **Default**-If you choose this option, | | | incoming calls have priority. | | | * **Highest**-If you choose this option, | | Reverted Call Focus | reverted calls have priority. | | Priority | | | | The **Not Selected** setting specifies | | | the reverted call focus priority setting | | | for the default device pool at | | | installation. At installation, incoming | | | calls have priority. You cannot choose | | | this setting in Unified CM. | | | | | | Note: This setting applies specifically | | | to hold reverted calls; it does not | | | apply to parked reverted calls. | +--------------------------+-------------------------------------------+ | Intercompany Media | Choose an **Intercompany Media Services | | Services Enrolled Group | Enrolled Group** from the drop-down list. | +--------------------------+-------------------------------------------+ .. _local_route_group_settings_fields: Local Route Group Settings Tab ............................... .. tabularcolumns:: |p{3.5cm}|p{12cm}| +-------------+-----------------------------------------------------------+ | Option | Description | +=============+===========================================================+ | Local Route | From the drop-down, choose the name of the local route | | Group | group to associate with this device pool. | +-------------+-----------------------------------------------------------+ | Route Group | From the drop-down, choose the value for the local route | | | group to associate with this device pool. | +-------------+-----------------------------------------------------------+ .. _roaming_sensitive_settings_fields: Roaming Sensitive Settings Tab ............................... .. tabularcolumns:: |p{3.5cm}|p{12cm}| +----------------------+-------------------------------------------------+ | Option | Description | +======================+=================================================+ | | Choose the date/time group to assign to | | | devices in this device pool. The date/time | | Date/Time Group \* | group specifies the time zone and the | | | display formats for date and time. | | | | | | Default value: None | +----------------------+-------------------------------------------------+ | | Choose the Unified CM region to assign to | | | devices in this device pool. The Unified CM | | | region settings specify voice codec that | | Region \* | can be used for calls within a region and | | | between other regions. | | | | | | Default value: None | +----------------------+-------------------------------------------------+ | | From the drop-down list, choose a media | | | resource group list. A media resource group | | | list specifies a prioritized list of media | | | resource groups. An application selects the | | | required media resource (for example, a | | Media Resource Group | music on hold server, transcoder, or | | List | conference bridge) from the available media | | | resource groups according to the priority | | | order defined in a media resource group | | | list. | | | | | | Default value: None | +----------------------+-------------------------------------------------+ | | Use locations to implement call admission | | | control (CAC) in a centralized | | | call-processing system. CAC enables you to | | | regulate audio quality and video | | | availability. It works by limiting the | | | amount of bandwidth that is available for | | | audio and video calls over links between | | | locations. The location specifies the total | | | bandwidth that is available for calls to | | | and from this location. | | | | | Location | From the drop-down list, choose the | | | appropriate location for this device pool. | | | | | | A location setting of **None** or **Hub_None** | | | means that the locations feature does not | | | track the bandwidth that the devices in | | | this pool consume. A location setting of | | | **Phantom** specifies a location that enables | | | successful CAC across intercluster trunks | | | that use H.323 protocol or SIP. | | | | | | Default value: None | +----------------------+-------------------------------------------------+ | | From the drop-down list, choose the | | | locale that is associated with phones and | | | gateways. The network locale contains a | | | definition of the tones and cadences that | | | the phones and gateways in the device pool | | | in a specific geographic area use. Make | | | sure that you select a network locale that | | | all of the phones and gateways that use | | | this device pool can support. | | | | | | Note: | | | | | | If the user does not choose a network | | | locale, the locale that is specified in the | | Network Locale | Unified CM clusterwide parameters as | | | Default Network Locale applies. | | | | | | Note: | | | | | | Choose only a network locale that is | | | already installed and supported by the | | | associated devices. The list contains all | | | available network locales for this setting, | | | but not all are necessarily installed. When | | | a device is associated with a network | | | locale that it does not support in the | | | firmware, the device fails to come up. | | | | | | Default value: None | +----------------------+-------------------------------------------------+ .. tabularcolumns:: |p{3.5cm}|p{12cm}| +----------------------+-------------------------------------------------+ | Option | Description | +======================+=================================================+ | | From the drop-down list, choose a | | | survivable remote site telephony (SRST) | | | reference to assign to devices in this | | | device pool. Choose from these options: | | | | | | * **Disable** - When you choose this option, | | | devices in this device pool do not have | | | SRST reference gateways that are | | SRST Reference \* | available to them. | | | * **Use Default Gateway** - When you choose | | | this option, devices in this device | | | pool use the default gateway for SRST. | | | * **Existing SRST references** - When you | | | choose an SRST reference from the | | | drop-down list, devices in this device | | | pool use this SRST reference gateway. | | | | | | Default value: None | +----------------------+-------------------------------------------------+ | | This setting defines the time that the | | | Cisco Unified IP Phone monitors its | | | connection to Unified CM before it | | | unregisters from SRST and reregisters to | | | Unified CM. | | | | | | To use the configuration for the enterprise | | | parameter, you can enter "1" or leave | | | the field blank. The default value for the | | Connection Monitor | enterprise parameter equals 120 seconds. | | Duration | | | | Tip: | | | | | | When you change the value of the connection | | | monitor duration, it applies only to the | | | device pool that is being updated. All | | | other device pools use the value in their | | | own connection monitor duration fields or | | | use the value that is configured in the | | | enterprise parameter. | +----------------------+-------------------------------------------------+ | | This setting determines whether the devices | | | or phone users in this device pool have | | | single-button access for barge and cBarge. | | | From the drop-down list, choose from | | | these options: | | | | | | * **Off** - When you choose this option, the | | | devices in this device pool have the | | | Single Button Barge/cBarge feature | | | disabled. | | | * **Barge** - When you choose this option, | | | the devices in this device pool have | | Single Button Barge | the Single Button Barge feature | | | enabled. | | | * **CBarge** - When you choose this option, | | | the devices in this device pool have | | | the Single Button cBarge feature | | | enabled. | | | * **Default** - When you choose this option, | | | the devices in this device pool use the | | | service parameter setting for the | | | Single Button Barge/cBarge feature. | | | | | | Default value: Default | +----------------------+-------------------------------------------------+ | | This setting determines whether the Join | | | Access Lines feature is enabled for the | | | devices or phone users in this device pool. | | | From the drop-down list, choose from | | | these options: | | | | | | * **Off** - When you choose this option, the | | | devices in this device pool have the | | | Join Access Lines feature disabled. | | Join Access Lines | * **On** - When you choose this option, the | | | devices in this device pool have the | | | Join Access Lines feature enabled. | | | * **Default** - When you choose this option, | | | the devices in this device pool use the | | | service parameter setting for the Join | | | Access Lines feature. | | | | | | Default value: Default | +----------------------+-------------------------------------------------+ | | Select the physical location for this | | | device pool. The system uses physical | | | location with the device mobility feature | | Physical Location | to identify the parameters that relate to a | | | specific geographical location. | | | | | | Default value: None | +----------------------+-------------------------------------------------+ .. tabularcolumns:: |p{3.5cm}|p{12cm}| +----------------------+-------------------------------------------------+ | Option | Description | +======================+=================================================+ | | Device mobility groups represent the | | | highest level geographic entities in your | | Device Mobility | network and are used to support the device | | Group | mobility feature. | | | | | | Default value: None | +----------------------+-------------------------------------------------+ | | Choose a wireless LAN profile group from | | | the drop-down list. | | | | | Wireless LAN Profile | Note: | | Group | | | | You can specify the Wireless LAN Profile | | | Group at the Device Pool level or the | | | individual phone level. | +----------------------+-------------------------------------------------+ .. _device_mobility_related_information_fields: Device Mobility Related Information Tab ........................................... .. tabularcolumns:: |p{3.5cm}|p{12cm}| +-------------------------+----------------------------------------------+ | Option | Description | +=========================+==============================================+ | | Choose the appropriate calling search | | | space to be used as the device calling | | Device Mobility Calling | search space when the device is roaming | | Search Space | and in the same device mobility group. | | | | | | Default value: None | +-------------------------+----------------------------------------------+ | | Choose the appropriate calling search | | | space for the device to use when | | | automated alternate routing (AAR) is | | | performed. The AAR calling search space | | AAR Calling Search | specifies the collection of route | | Space | partitions that are searched to | | | determine how to route a collected | | | (originating) number that is otherwise | | | blocked due to insufficient bandwidth. | | | | | | Default value: None | +-------------------------+----------------------------------------------+ | | Choose the automated alternate routing | | | (AAR) group for this device. The AAR | | | group provides the prefix digits that | | | are used to route calls that are | | AAR Group | otherwise blocked due to insufficient | | | bandwidth. An AAR group setting of **None** | | | specifies that no rerouting of blocked | | | calls is attempted. | | | | | | Default value: None | +-------------------------+----------------------------------------------+ | | This setting allows you to localize the | | | calling party number on the device. Make | | | sure that the Calling Party | | | Transformation CSS that you choose | | | contains the calling party | | | transformation pattern that you want to | | | assign to this device pool. | | | | | | Tip: Before the call occurs, the device | | Calling Party | must apply the transformation by using | | Transformation CSS | digit analysis. | | | | | | Note: | | | | | | If you configure the Calling Party | | | Transformation CSS as **None** for the | | | device pool and you select the | | | **Use Device Pool Calling Party | | | Transformation CSS** check box in the | | | device configuration window, the | | | transformation does not match and does | | | not get applied. Ensure that you | | | configure the Calling Party | | | Transformation Pattern in a non-null | | | partition that is not used for routing. | | | | | | Default value: None | +-------------------------+----------------------------------------------+ | | This setting allows you to localize the | | | called party number on the device. Make | | | sure that the Called Party | | | Transformation CSS that you choose | | | contains the called party transformation | | | pattern that you want to assign to this | | | device pool. | | | | | Called Party | Note: | | Transformation CSS | | | | If you configure the Called Party | | | Transformation CSS as **None**, the | | | transformation does not match and does | | | not get applied. Ensure that you | | | configure the Called Party | | | Transformation pattern in a non-null | | | partition that is not used for routing. | | | | | | Default value: None | +-------------------------+----------------------------------------------+ .. _geolocation_configuration_fields: Geolocation Configuration Tab ................................. .. tabularcolumns:: |p{3.5cm}|p{12cm}| +--------------------+---------------------------------------------+ | Option | Description | +====================+=============================================+ | | From the drop-down list, choose a | | | geolocation. | | | | | | You can choose the Unspecified geolocation, | | Geolocation | which designates that the devices in this | | | device pool do not associate with a | | | geolocation. | | | | | | Default value: None | +--------------------+---------------------------------------------+ | | From the drop-down list, choose a | | | geolocation filter. | | | | | Geolocation Filter | If you leave the setting, no | | | geolocation filter gets applied for the | | | devices in this device pool. | | | | | | Default value: None | +--------------------+---------------------------------------------+ .. _incoming_calling_party_settings_fields: Incoming Calling Party Settings Tab ....................................... .. tabularcolumns:: |p{3.5cm}|p{12cm}| +------------------------+------------------------------------------------+ | Option | Description | +========================+================================================+ | | Unified CM applies the prefix that you | | | enter in this field to calling party | | | numbers that use **National** for the Calling | | | Party Numbering Type. | | | | | | You can enter up to eight characters, which | | | include digits, the international escape | | National Prefix | character (\+), asterisk (*), or the pound | | | sign (#). You can enter the word "Default" | | | instead of entering a prefix. If the word | | | "Default" displays in the **Prefix** field, | | | Unified CM applies the service parameter | | | configuration for the incoming calling | | | party prefix, which supports both the | | | prefix and strip digit functionality. | +------------------------+------------------------------------------------+ | | Enter the number of digits, up to the | | | number 24, that you want Unified CM to | | National Strip Digits | strip from the calling party number of | | | National type before it applies the | | | prefixes. | +------------------------+------------------------------------------------+ | | This setting allows you to globalize the | | | calling party number of National calling | | | party number type on the device. Make | | | sure that the calling search space that | | | you choose contains the calling party | | | transformation pattern that you want to | | National Calling | assign to this device. Before the call | | Search Space | occurs, the device must apply the | | | transformation by using digit analysis. | | | If you configure the CSS as **None**, the | | | transformation does not match and does | | | not get applied. Make sure that you | | | configure the calling party | | | transformation pattern in a non-null | | | partition that is not used for routing. | +------------------------+------------------------------------------------+ | | Unified CM applies the prefix that you | | | enter in this field to calling party | | | numbers that use **International** for the | | | Calling Party Numbering Type. You can | | | enter up to eight characters, which | | | include digits, the international escape | | | character (\+), asterisk (*), or the pound | | International Prefix | sign (#). You can enter the word "Default" | | | instead of entering a prefix. If the word | | | "Default" displays in the **Prefix** field in | | | the **Device Pool Configuration** window, | | | Unified CM applies the service parameter | | | configuration for the incoming calling | | | party prefix, which supports both the | | | prefix and strip digit functionality. | +------------------------+------------------------------------------------+ | | Enter the number of digits, up to the | | International Strip | number 24, that you want Unified CM to | | Digits | strip from the calling party number of | | | International type before it applies the | | | prefixes. | +------------------------+------------------------------------------------+ | | This setting allows you to globalize the | | | calling party number of International | | | calling party number type on the device. | | | Make sure that the calling party | | | transformation CSS that you choose | | | contains the calling party transformation | | | pattern that you want to assign to this | | International Calling | device. Before the call occurs, the | | Search Space | device must apply the transformation by | | | using digit analysis. If you configure | | | the CSS as **None**, the transformation does | | | not match and does not get applied. | | | Ensure that you configure the calling | | | party transformation pattern in a | | | non-null partition that is not used for | | | routing. | +------------------------+------------------------------------------------+ .. tabularcolumns:: |p{3.5cm}|p{12cm}| +------------------------+------------------------------------------------+ | Option | Description | +========================+================================================+ | | Unified CM applies the prefix that you | | | enter in this field to calling party | | | numbers that use **Unknown** for the Calling | | | Party Numbering Type. You can enter up to | | | eight characters, which include digits, | | | the international escape character (\+), | | Unknown Prefix | asterisk (*), or the pound sign (#). If | | | the word "Default" displays in the **Prefix** | | | field in the Device Pool Configuration | | | window, Unified CM applies the service | | | parameter configuration for the incoming | | | calling party prefix, which supports both | | | the prefix and strip digit functionality. | +------------------------+------------------------------------------------+ | | Enter the number of digits, up to the | | | number 24, that you want Unified CM to | | Unknown Strip Digits | strip from the calling party number of | | | Unknown type before it applies the | | | prefixes. | +------------------------+------------------------------------------------+ | | This setting allows you to globalize the | | | calling party number of "Unknown" calling | | | party number type on the device. Make | | | sure that the calling party | | | transformation CSS that you choose | | | contains the calling party transformation | | | pattern that you want to assign to this | | Unknown Calling Search | device. Before the call occurs, the | | Space | device must apply the transformation by | | | using digit analysis. If you configure | | | the CSS as **None**, the transformation does | | | not match and does not get applied. | | | Ensure that you configure the calling | | | party transformation pattern in a | | | non-null partition that is not used for | | | routing. | +------------------------+------------------------------------------------+ | | Unified CM applies the prefix that you | | | enter in this field to calling party | | | numbers that use **Subscriber** for the | | | Calling Party Numbering Type. You can | | | enter up to eight characters, which | | | include digits, the international escape | | Subscriber Prefix | character (\+), asterisk (*), or the pound | | | sign (#). If the word "Default" displays in | | | the **Prefix** field in the **Device Pool | | | Configuration** window, Unified CM applies | | | the service parameter configuration for | | | the incoming calling party prefix, which | | | supports both the prefix and strip digit | | | functionality. | +------------------------+------------------------------------------------+ | | Enter the number of digits, up to the | | Subscriber Strip | number 24, that you want Unified CM to | | Digits | strip from the calling party number of | | | Subscriber type before it applies the | | | prefixes. | +------------------------+------------------------------------------------+ | | This setting allows you to globalize the | | | calling party number of **Subscriber** | | | calling party number type on the device. | | | Make sure that the CSS that you choose | | | contains the calling party transformation | | | pattern that you want to assign to this | | Subscriber Calling | device. Before the call occurs, the | | Search Space | device must apply the transformation by | | | using digit analysis. If you configure | | | the CSS as **None**, the transformation does | | | not match and does not get applied. | | | Ensure that you configure the calling | | | party transformation pattern in a | | | non-null partition that is not used for | | | routing. | +------------------------+------------------------------------------------+ .. _incoming_called_party_settings_fields: Incoming Called Party Settings Tab ................................... .. tabularcolumns:: |p{3.5cm}|p{12cm}| +------------------------+-------------------------------------------------+ | Option | Description | +========================+=================================================+ | | Unified CM applies the prefix that you | | | enter in this field to calling party | | | numbers that use **National** for the Called | | | Party Numbering Type. | | | | | | You can enter up to sixteen (16) characters, | | | which include digits, the international escape | | National Prefix | character (\+), asterisk (*), or the pound sign | | | (#). You can enter the word "Default" instead | | | of entering a prefix. | | | | | | Tip: | | | | | | If the word "Default" displays in the | | | **Gateway** or **Trunk Configuration** window, | | | you cannot configure the **Strip Digits** field | | | in the Gateway or Trunk Configuration window. | | | In this case, Unified CM takes the configuration| | | for the **Prefix** and **Strip Digits** fields | | | from the device pool that is applied to the | | | device. If the word "Default" displays in the | | | **Prefix** field in the **Device Pool | | | Configuration** window, Unified CM applies the | | | service parameter configuration for the | | | incoming called party prefix, which supports | | | both the prefix and strip digit functionality. | | | | | | Tip: | | | | | | To configure the **Strip Digits** field, leave | | | the **Prefix** field blank or enter a valid | | | configuration in the **Prefix** field. To | | | configure the **Strip Digits** fields, do not | | | enter the word "Default" in the **Prefix** | | | field. | +------------------------+-------------------------------------------------+ | National Strip Digits | Enter the number of digits, that you want | | | Unified CM to strip from the called party | | | number of "Unknown" type before it applies the | | | prefixes. | +------------------------+-------------------------------------------------+ | National Calling | This setting allows you to transform the called | | Search Space | party number of "Unknown" called party number | | | type on the device. If you choose **None**, no | | | transformation occurs for the incoming called | | | party number. Make sure that the calling search | | | space that you choose contains the called party | | | transformation pattern that you want to assign | | | to this device. | +------------------------+-------------------------------------------------+ | | Unified CM applies the prefix that you enter in | | | this field to called party numbers that use | | | **National** for the Called Party Numbering | | | Type. You can enter up to 16 characters, which | | | include digits, the international escape | | | character (+), asterisk (*), or the pound sign | | | (#). You can enter the word "Default" instead | | International Prefix | of entering a prefix. | | | | | | Tip: | | | | | | If the word "Default" displays in the | | | **Prefix** field in the Gateway or Trunk | | | Configuration window, you cannot configure the | | | **Strip Digits** field in the Gateway or Trunk | | | Configuration window. In this case, Unified CM | | | takes the configuration for the **Prefix** and | | | **Strip Digits** fields from the device pool | | | that is applied to the device. If the word | | | "Default" displays in the **Prefix** field in | | | the Device Pool Configuration window, Unified | | | CM applies the service parameter configuration | | | for the incoming called party prefix, which | | | supports both the prefix and strip digit | | | functionality. | | | | | | Tip: | | | | | | To configure the **Strip Digits** field, | | | leave the **Prefix** field blank or enter a | | | valid configuration in the **Prefix** field. | | | To configure the **Strip Digits** fields, | | | do not enter the word "Default" in the | | | **Prefix** field. | +------------------------+-------------------------------------------------+ | International Strip | Enter the number of digits that you want | | Digits | Unified CM to strip from the called party | | | number of International type before it applies | | | the prefixes. | +------------------------+-------------------------------------------------+ | International Calling | This setting allows you to transform the | | Search Space | called party number of International called | | | party number type on the device. If you choose | | | **None**, no transformation occurs for the | | | incoming called party number. Make sure that | | | the calling search space that you choose | | | contains the called party transformation | | | pattern that you want to assign to this device. | +------------------------+-------------------------------------------------+ .. tabularcolumns:: |p{3.5cm}|p{12cm}| +------------------------+------------------------------------------------+ | Option | Description | +========================+================================================+ | | Unified CM applies the prefix that you | | | enter in this field to called numbers that use | | | **Unknown** for the Called Party Numbering | | | Type. You can enter up to sixteen characters, | | | which include digits, the international escape | | | character (\+), asterisk (*), or the pound | | | sign (#). You can enter the word "Default" | | | instead of entering a prefix. | | | | | Unknown Prefix | Tip: | | | | | | If the word "Default" displays in the | | | **Prefix** in the Gateway or Trunk window, | | | you cannot configure the **Strip Digits** in | | | the Gateway or Trunk Configuration window. In | | | this case, Unified CM takes the configuration | | | for the **Prefix** and **Strip Digits** fields | | | from the device pool that is applied to the | | | device. If the word "Default" displays in the | | | **Prefix** field in the Device Pool | | | Configuration window, Unified CM applies the | | | service parameter configuration for the | | | incoming called party prefix, which supports | | | both the prefix and strip digit functionality. | | | | | | Tip: | | | | | | To configure the **Strip Digits** field, leave | | | the **Prefix** field blank or enter a valid | | | configuration in the **Prefix field**. To | | | configure the **Strip Digits** fields, do not | | | enter the word "Default" in the **Prefix** | | | field. | +------------------------+------------------------------------------------+ | Unknown Strip Digits | Enter the number of digits, that you want | | | Unified CM to strip from the called party | | | number of "Unknown" type before it applies the | | | prefixes. | +------------------------+------------------------------------------------+ | Unknown Calling Search | This setting allows you to transform the | | Space | called party number of "Unknown" called party | | | number type on the device. If you choose | | | **None** no transformation occurs for the | | | incoming called party number. Make sure that | | | the calling search space that you choose | | | contains the called party transformation | | | pattern that you want to assign to this device.| +------------------------+------------------------------------------------+ | Subscriber Prefix | Unified CM applies the prefix that you | | | enter in this field to called numbers that use | | | **Subscriber** for the Called Party Numbering | | | Type. You can enter up to sixteen characters, | | | which include digits, the international escape | | | character (\+), asterisk (*), or the pound | | | sign (#). You can enter the word "Default" | | | instead of entering a prefix. | | | | | | Tip: | | | | | | If the word "Default" displays in the | | | **Prefix** field in the Gateway or Trunk | | | Configuration window, you cannot configure the | | | **Strip Digits** field in the Gateway or Trunk | | | Configuration window. In this case, Unified CM | | | takes the configuration for the **Prefix** and | | | **Strip Digits** fields from the device pool | | | that is applied to the device. If the word | | | "Default" displays in the **Prefix** field in | | | the Device Pool Configuration window, Unified | | | CM applies the service parameter configuration | | | for the incoming called party prefix, which | | | supports both the prefix and strip digit | | | functionality. | | | | | | Tip: | | | | | | To configure the **Strip Digits** field, leave | | | the **Prefix** field blank or enter a valid | | | configuration in the **Prefix** field. To | | | configure the **Strip Digits** fields, do not | | | enter the word "Default" in the **Prefix** | | | field. | +------------------------+------------------------------------------------+ | Subscriber Strip | Enter the number of digits, that you want | | Digits | Unified CM to strip from the called party | | | number of Subscriber type before it applies | | | the prefixes. | +------------------------+------------------------------------------------+ | Subscriber Calling | This setting allows you to transform the | | Search Space | called party number of Subscriber called party | | | number type on the device. If you choose | | | **None**, no transformation occurs for the | | | incoming called party number. Make sure that | | | the calling search space that you choose | | | contains the called party transformation | | | pattern that you want to assign to this device.| +------------------------+------------------------------------------------+ .. _caller_id_for_calls_from_this_phone_fields: Caller ID For Calls From This Phone Tab ........................................ .. tabularcolumns:: |p{3.5cm}|p{12cm}| +--------------------+-----------------------------------------------+ | Option | Description | +====================+===============================================+ | | From the drop-down list, choose the | | | CSS that contains the Calling Party | | Calling Party | Transformation Pattern that you want to | | Transformation CSS | apply to devices in this device pool. | | | | | | When Unified CM receives a call from a device | | | in this device pool on an inbound line, | | | Unified CM immediately applies the calling | | | party transformation patterns in this CSS to | | | the digits in the calling party number before | | | it routes the call. This setting allows you | | | to apply digit transformations to the calling | | | party number before Unified CM routes the | | | call. For example, a transformation pattern | | | can change a phone extension to appear as | | | an E.164 number. | +--------------------+-----------------------------------------------+ .. _connected_party_settings_fields: Connected Party Settings Tab ............................. .. tabularcolumns:: |p{3.5cm}|p{12cm}| +--------------------+-----------------------------------------------+ | Option | Description | +====================+===============================================+ | | This setting is applicable for inbound calls | | | only. This setting allows you to transform | | | the connected party number on the device to | | | display the connected number in another | | | format, such as a DID or E164 number. Unified | | | CM includes the transformed number in the | | | headers of various SIP messages, including | | | 200 OK and mid-call update/reinvite messages | | | for SIP calls and in the Connected Number | | | Information Element of CONNECT and NOTIFY | | Connected Party | messages for H.323 and MGCP calls. Make sure | | Transformation CSS | that the Connected Party Transformation CSS | | | that you choose contains the called party | | | transformation pattern that you want to | | | assign to this device pool. | | | | | | Note: | | | | | | If you configure the Connected Party | | | Transformation CSS as **None**, the | | | transformation does not match and does not | | | get applied. Ensure that you configure the | | | Calling Party Transformation pattern used for | | | Connected Party Transformation in a non-null | | | partition that is not used for routing. | +--------------------+-----------------------------------------------+ .. _redirecting_party_settings_fields: Redirecting Party Settings Tab ............................... .. tabularcolumns:: |p{3.5cm}|p{12cm}| +--------------------+-----------------------------------------------+ | Option | Description | +====================+===============================================+ | | This setting allows you to transform the | | | redirecting party number on the device to E164| | | format. Unified CM includes the transformed | | | number in the diversion header of invite | | | messages for SIP trunks and in the Redirecting| | Redirecting Party | Number Information Element of setup message | | Transformation CSS | (for H.323 and MGCP) sent out of Unified CM. | | | Make sure that the Redirecting Party | | | Transformation CSS that you choose contains | | | the called party transformation pattern that | | | you want to assign to this device pool. | | | that the Connected Party Transformation CSS | | | that you choose contains the called party | | | transformation pattern that you want to | | | assign to this device pool. | | | | | | Note: | | | | | | If you configure the Redirecting Party | | | Transformation CSS as **None**, the | | | transformation does not match and does not | | | get applied. Ensure that you configure the | | | Redirecting Party Transformation CSS in a | | | non-null partition that is not used for | | | routing. | +--------------------+-----------------------------------------------+