[Index]

Model: device/cucm/RemoteDestinationProfile

Model Details: device/cucm/RemoteDestinationProfile

Title Description Details
Protocol * Protocol option is read-only,except when creating a device.
  • Field Name: protocol
  • Type: String
  • Cardinality: [1..1]
  • Choices: ["SCCP", "Digital Access PRI", "H.225", "Analog Access", "Digital Access T1", "Route Point", "Unicast Bridge", "Multicast Point", "Inter-Cluster Trunk", "RAS", "Digital Access BRI", "SIP", "MGCP", "Static SIP Mobile Subscriber", "SIP Connector", "Remote Destination", "Mobile Smart Client", "Digital Access E1 R2", "CTI Remote Device", "Protocol Not Specified"]
Network Hold MOH Audio Source Choose the audio source from the IOS gateway that provides multicasting audio source for Cisco Unified Mobility and Mobile Voice Access calls.
  • Field Name: networkHoldMohAudioSourceId
  • Type: ["String", "Null", "Integer"]
  • Target: device/cucm/MohAudioSource
  • Target attr: sourceId
  • Cardinality: [0..1]
  • Format: uri
  • Choices: ["0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30", "31", "32", "33", "34", "35", "36", "37", "38", "39", "40", "41", "42", "43", "44", "45", "46", "47", "48", "49", "50", "null", ""]
User ID * Choose the user to whom this profile is assigned. The selection must match the ID of a user in the End User Configuration window where Enable Mobility is checked.
  • Field Name: userId
  • Type: ["String", "Null"]
  • Target: device/cucm/User
  • Target attr: userid
  • Cardinality: [1..1]
  • Format: uri
User Hold Audio Source Choose the audio option for users on hold for Cisco Unified Mobility and Mobile Voice Access calls.
  • Field Name: userHoldMohAudioSourceId
  • Type: ["String", "Null", "Integer"]
  • Target: device/cucm/MohAudioSource
  • Target attr: sourceId
  • Cardinality: [0..1]
  • Format: uri
  • Choices: ["0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30", "31", "32", "33", "34", "35", "36", "37", "38", "39", "40", "41", "42", "43", "44", "45", "46", "47", "48", "49", "50", "null", ""]
Calling Search Space Choose the calling search space to be used for routing Mobile Voice Access or Enterprise Feature Access calls. Note    This calling search space setting applies only when you are routing calls from the remote destination, which specifies the outbound call leg to the dialed number for Mobile Voice Access and Enterprise Feature Access calls.
  • Field Name: callingSearchSpaceName
  • Type: ["String", "Null"]
  • Target: device/cucm/Css
  • Target attr: name
  • Cardinality: [0..1]
  • Format: uri
Mobile Smart Client Profile Name
  • Field Name: mobileSmartClientProfileName
  • Type: ["String", "Null"]
  • Target: device/cucm/MobileSmartClientProfile
  • Target attr: name
  • Cardinality: [0..1]
  • Format: uri
Network Locale
  • Field Name: networkLocale
  • Type: ["String", "Null"]
  • Target: device/cucm/Country
  • Target attr: name
  • Cardinality: [0..1]
  • Format: uri
  • Choices: ["Argentina", "Australia", "Austria", "Belgium", "Brazil", "Canada", "China", "Colombia", "Cyprus", "Czech Republic", "Denmark", "Egypt", "Finland", "France", "Germany", "Ghana", "Greece", "Hong Kong", "Hungary", "Iceland", "India", "Indonesia", "Ireland", "Israel", "Italy", "Japan", "Jordan", "Kenya", "Korea Republic", "Lebanon", "Luxembourg", "Malaysia", "Mexico", "Nepal", "Netherlands", "New Zealand", "Nigeria", "Norway", "Pakistan", "Panama", "Peru", "Philippines", "Poland", "Portugal", "Russian Federation", "Saudi Arabia", "Singapore", "Slovakia", "Slovenia", "South Africa", "Spain", "Sweden", "Switzerland", "Taiwan", "Thailand", "Turkey", "United Kingdom", "United States", "Venezuela", "Zimbabwe", "Itu", "Chile", "Bulgaria", "Croatia", "Romania", "Serbia and Montenegro", "United Arab Emirates", "Oman", "Kuwait", "Algeria", "Bahrain", "Iraq", "Mauritania", "Republic of Montenegro", "Morocco", "Qatar", "Republic of Serbia", "Sudan", "Tunisia", "Vietnam", "Yemen", "Lithuania", "Latvia", "Estonia", "Ukraine"]
Use Device Pool Calling Party Transformation CSS To use the Calling Party Transformation CSS that is configured in the device pool that is assigned to this device, check this check box. If you do not check this check box, the device uses the Calling Party Transformation CSS that you configured in the Remote Destination Profile Configuration window. Default: True
  • Field Name: useDevicePoolCgpnTransformCss
  • Type: Boolean
  • Cardinality: [0..1]
  • Default: True
Product * Product ID string. read-only except when creating a device.
  • Field Name: product
  • Type: String
  • Cardinality: [1..1]
  • Choices: ["7914 14-Button Line Expansion Module", "7915 12-Button Line Expansion Module", "7915 24-Button Line Expansion Module", "7916 12-Button Line Expansion Module", "7916 24-Button Line Expansion Module", "AIM-VOICE-30", "Analog Phone", "Annunciator", "BEKEM 36-Button Line Expansion Module", "C881V", "C887VA-V", "CKEM 36-Button Line Expansion Module", "CP-8800-Audio 28-Button Key Expansion Module", "CP-8800-Video 28-Button Key Expansion Module", "CTI Port", "CTI Remote Device", "CTI Route Point", "Carrier-integrated Mobile", "Cisco IAD2400", "Cisco 12 S", "Cisco 12 SP", "Cisco 12 SP+", "Cisco 1751", "Cisco 1760", "Cisco 1861", "Cisco 269X", "Cisco 26XX", "Cisco 2801", "Cisco 2811", "Cisco 2821", "Cisco 2851", "Cisco 2901", "Cisco 2911", "Cisco 2921", "Cisco 2951", "Cisco 30 SP+", "Cisco 30 VIP", "Cisco 362X", "Cisco 364X", "Cisco 366X", "Cisco 3725", "Cisco 3745", "Cisco 3825", "Cisco 3845", "Cisco 3905", "Cisco 3911", "Cisco 3925", "Cisco 3925E", "Cisco 3945", "Cisco 3945E", "Cisco 3951", "Cisco 6901", "Cisco 6911", "Cisco 6921", "Cisco 6941", "Cisco 6945", "Cisco 6961", "Cisco 7811", "Cisco 7821", "Cisco 7832", "Cisco 7841", "Cisco 7861", "Cisco 7902", "Cisco 7905", "Cisco 7906", "Cisco 7910", "Cisco 7911", "Cisco 7912", "Cisco 7920", "Cisco 7921", "Cisco 7925", "Cisco 7926", "Cisco 7931", "Cisco 7935", "Cisco 7936", "Cisco 7937", "Cisco 7940", "Cisco 7941", "Cisco 7941G-GE", "Cisco 7942", "Cisco 7945", "Cisco 7960", "Cisco 7961", "Cisco 7961G-GE", "Cisco 7962", "Cisco 7965", "Cisco 7970", "Cisco 7971", "Cisco 7975", "Cisco 7985", "Cisco 881", "Cisco 8811", "Cisco 8821", "Cisco 8831", "Cisco 8832", "Cisco 8832NR", "Cisco 8841", "Cisco 8845", "Cisco 8851", "Cisco 8851NR", "Cisco 8861", "Cisco 8865", "Cisco 8865NR", "Cisco 888/887/886", "Cisco 8941", "Cisco 8945", "Cisco 8961", "Cisco 9951", "Cisco 9971", "Cisco ATA 186", "Cisco ATA 187", "Cisco ATA 190", "Cisco ATA 191", "Cisco Catalyst 4000 Access Gateway Module", "Cisco Catalyst 4224 Voice Gateway Switch", "Cisco Catalyst 6000 12 port FXO Gateway", "Cisco Catalyst 6000 24 port FXS Gateway", "Cisco Catalyst 6000 E1 VoIP Gateway", "Cisco Catalyst 6000 T1 VoIP Gateway", "Cisco Cius", "Cisco Cius SP", "Cisco Collaboration Mobile Convergence", "Cisco Conference Bridge (WS-SVC-CMM)", "Cisco Conference Bridge Hardware", "Cisco Conference Bridge Software", "Cisco DX650", "Cisco DX70", "Cisco DX80", "Cisco Dual Mode for Android", "Cisco Dual Mode for iPhone", "Cisco E20", "Cisco ENCS 5400 ISRV", "Cisco IOS Conference Bridge", "Cisco IOS Enhanced Conference Bridge", "Cisco IOS Enhanced Media Termination Point", "Cisco IOS Enhanced Software Media Termination Point", "Cisco IOS Guaranteed Audio Video Conference Bridge", "Cisco IOS Heterogeneous Video Conference Bridge", "Cisco IOS Homogeneous Video Conference Bridge", "Cisco IOS Media Termination Point", "Cisco IP Communicator", "Cisco ISR 4321", "Cisco ISR 4331", "Cisco ISR 4351", "Cisco ISR 4431", "Cisco ISR 4451", "Cisco ISR 4461", "Cisco Jabber for Tablet", "Cisco MGCP BRI Port", "Cisco MGCP E1 Port", "Cisco MGCP FXO Port", "Cisco MGCP FXS Port", "Cisco MGCP T1 Port", "Cisco Media Server (WS-SVC-CMM-MS)", "Cisco Media Termination Point (WS-SVC-CMM)", "Cisco Media Termination Point Hardware", "Cisco Media Termination Point Software", "Cisco Meeting Server", "Cisco Spark Remote Device", "Cisco TelePresence", "Cisco TelePresence 1000", "Cisco TelePresence 1100", "Cisco TelePresence 1300-47", "Cisco TelePresence 1300-65", "Cisco TelePresence 200", "Cisco TelePresence 3000", "Cisco TelePresence 3200", "Cisco TelePresence 400", "Cisco TelePresence 500-32", "Cisco TelePresence 500-37", "Cisco TelePresence Codec C40", "Cisco TelePresence Codec C60", "Cisco TelePresence Codec C90", "Cisco TelePresence Conductor", "Cisco TelePresence DX70", "Cisco TelePresence EX60", "Cisco TelePresence EX90", "Cisco TelePresence Exchange System", "Cisco TelePresence IX5000", "Cisco TelePresence MCU", "Cisco TelePresence MX200", "Cisco TelePresence MX200 G2", "Cisco TelePresence MX300", "Cisco TelePresence MX300 G2", "Cisco TelePresence MX700", "Cisco TelePresence MX800", "Cisco TelePresence MX800 Dual", "Cisco TelePresence Profile 42 (C20)", "Cisco TelePresence Profile 42 (C40)", "Cisco TelePresence Profile 42 (C60)", "Cisco TelePresence Profile 52 (C40)", "Cisco TelePresence Profile 52 (C60)", "Cisco TelePresence Profile 52 Dual (C60)", "Cisco TelePresence Profile 65 (C60)", "Cisco TelePresence Profile 65 Dual (C90)", "Cisco TelePresence Quick Set C20", "Cisco TelePresence SX10", "Cisco TelePresence SX20", "Cisco TelePresence SX80", "Cisco TelePresence TX1310-65", "Cisco TelePresence TX9000", "Cisco TelePresence TX9200", "Cisco Unified Client Services Framework", "Cisco Unified Communications for RTX", "Cisco Unified Mobile Communicator", "Cisco Unified Personal Communicator", "Cisco VG200", "Cisco VG248 Gateway", "Cisco VGC Phone", "Cisco VGC Virtual Phone", "Cisco VGD-1T3", "Cisco VXC 6215", "Cisco Video Conference Bridge(IPVC-35xx)", "Cisco Voice Mail Port", "Cisco Webex DX80", "Cisco Webex Room 55", "Cisco Webex Room 55 Dual", "Cisco Webex Room 70 Dual", "Cisco Webex Room 70 Dual G2", "Cisco Webex Room 70 Single", "Cisco Webex Room 70 Single G2", "Cisco Webex Room Kit", "Cisco Webex Room Kit Mini", "Cisco Webex Room Kit Plus", "Communication Media Module", "EMCC Base Phone", "FLEX_SLOT", "Gatekeeper", "Generic Desktop Video Endpoint", "Generic Multiple Screen Room System", "Generic Single Screen Room System", "H.225 Trunk (Gatekeeper Controlled)", "H.323 Client", "H.323 Gateway", "Hunt List", "IAD2400_ANALOG", "IAD2400_DIGITAL", "IMS-integrated Mobile (Basic)", "IP-STE", "ISDN BRI Phone", "Inter-Cluster Trunk (Gatekeeper Controlled)", "Inter-Cluster Trunk (Non-Gatekeeper Controlled)", "Interactive Voice Response", "Load Simulator", "Motorola CN622", "Music On Hold", "NM-1V", "NM-2V", "NM-4VWIC-MBRD", "NM-HD-1V", "NM-HD-2V", "NM-HD-2VE", "NM-HDA", "NM-HDV", "NM-HDV2-0PORT", "NM-HDV2-1PORT", "NM-HDV2-2PORT", "Nokia S60", "PA-MCX", "PA-VXA", "PA-VXB", "PA-VXC", "Pilot", "Remote Destination Profile", "Route List", "SCCP Device", "SCCP gateway virtual phone", "SIP Trunk", "SIP WSM Connection", "SPA8800", "Third-party AS-SIP Endpoint", "Third-party SIP Device (Advanced)", "Third-party SIP Device (Basic)", "Transnova S3", "Universal Device Template", "Unknown", "VG202", "VG204", "VG224", "VG310", "VG320", "VG350", "VG400", "VG450", "VGC Port", "VIC_SLOT", "VKEM 36-Button Line Expansion Module", "VNM-HDA", "VWIC_SLOT", "WS-SVC-CMM-MS", "WS-X6600"]
Description Enter a text description of the remote destination profile. This field can comprise up to 128 characters. You can use all characters except quotes (“), close angle bracket (>), open angle bracket (<), backslash (\), ampersand (&), and percent sign (%).
  • Field Name: description
  • Type: ["String", "Null"]
  • Cardinality: [0..1]
Ignore Presentation Indicators (internal calls only) Check the check box if you want to ignore the connected line ID presentation. Use this configuration for internal calls.
  • Field Name: ignorePresentationIndicators
  • Type: Boolean
  • Cardinality: [0..1]
User Locale From the drop-down list box, choose the locale that is associated with the phone user interface. The user locale identifies a set of detailed information, including language and font, to support users. Cisco Unified Communications Manager makes this field available only for phone models that support localization. Note    If the users require information to display (on the phone) in any language other than English, verify that the locale installer is installed before you configure user locale. See the Cisco Unified Communications Manager Locale Installer documentation.
  • Field Name: userLocale
  • Type: ["String", "Null"]
  • Target: device/cucm/UserLocale
  • Target attr: name
  • Cardinality: [0..1]
  • Format: uri
  • Choices: ["English United States"]
Class * Class ID string. Class information is read-only except when creating a device.
  • Field Name: class
  • Type: String
  • Cardinality: [1..1]
  • Choices: ["Phone", "Gateway", "Conference Bridge", "Media Termination Point", "Route List", "Voice Mail", "CTI Route Point", "Music On Hold", "Simulation", "Pilot", "GateKeeper", "Add-on modules", "Hidden Phone", "Trunk", "Tone Announcement Player", "Remote Destination Profile", "EMCC Base Phone Template", "EMCC Base Phone", "Remote Destination Profile Template", "Gateway Template", "UDP Template", "Phone Template", "Device Profile", "Invalid", "Interactive Voice Response"]
Primary Phone Name
  • Field Name: primaryPhoneName
  • Type: ["String", "Null"]
  • Target: device/cucm/Phone
  • Target attr: name
  • Cardinality: [0..1]
  • Format: uri
Dnd Option This Call Reject option specifies that no incoming call information gets presented to the user. Note    For mobile devices, dual-mode phones, and phones that are running SCCP, you can only choose the Call Reject option. When you activate DND Call Reject on a mobile device or dual-mode phone, no call information gets presented to the device. Default: Ringer Off
  • Field Name: dndOption
  • Type: String
  • Cardinality: [0..1]
  • Default: Ringer Off
  • Choices: ["Ringer Off", "Call Reject", "Use Common Phone Profile Setting"]
Dnd Status Check this check box to enable Do Not Disturb on the phone.
  • Field Name: dndStatus
  • Type: Boolean
  • Cardinality: [0..1]
Name * Enter a text name for the remote destination profile. This name can comprise up to 50 characters. Valid characters include letters, numbers, dashes, dots (periods), spaces, and underscores.
  • Field Name: name
  • Type: String
  • Cardinality: [1..1]
Privacy * Choose a privacy option for the remote destination profile. If you choose the Default value for this field, the setting matches the value of the Privacy Setting service parameter. Note    If you change and save the value of the Privacy Setting service parameter, you must return to the Remote Destination Profile Configuration window for a remote destination profile that specifies Default and click Save for the service parameter change to take effect. Note    You cannot transfer a call from a cell phone to a desk phone if the Remote Destination Profile Privacy specifies On, and the "Enforce Privacy Setting on Held Calls" service parameter specifies True. Default: Default
  • Field Name: callInfoPrivacyStatus
  • Type: String
  • Cardinality: [1..1]
  • Default: Default
  • Choices: ["Off", "On", "Default"]
Rerouting Calling Search Space Choose a calling search space to be used to route Cisco Unified Mobility calls. Note    Ensure that the gateway that is configured for routing mobile calls is assigned to the partition that belongs to the Rerouting Calling Search Space. Cisco Unified Communications Manager determines how to route calls based on the remote destination number and the Rerouting Calling Search Space. Note    The Rerouting Calling Search Space setting applies only when you are routing calls to the remote destination or mobility identity, which specifies the outbound call leg toward the remote destination or mobility identity when a call comes in to the user enterprise number. Note    Cisco Unified Mobility calls do not get routed to the dual-mode mobility identity number that corresponds to the dual-mode mobile phone number if the device associates with the enterprise WLAN and registers with Cisco Unified Communications Manager. Cisco Unified Mobility calls get routed to the dual-mode mobility identity number only when the device is outside the enterprise.
  • Field Name: rerouteCallingSearchSpaceName
  • Type: ["String", "Null"]
  • Target: device/cucm/Css
  • Target attr: name
  • Cardinality: [0..1]
  • Format: uri
Protocol Side * Side information is read-only except when creating a device Default: User
  • Field Name: protocolSide
  • Type: String
  • Cardinality: [1..1]
  • Default: User
  • Choices: ["Network", "User"]
Lines
  • Field Name: lines
  • Type: ["Null", "Object"]
  • Cardinality: [0..1]
Line An XLine is an entry in the DeviceNumPlanMap table. The actual directory number is referenced inside the XLine object by the "dirn" or "dirnId" element.
  • Field Name: line.[n]
  • Type: Array
Display Ascii
  • Field Name: lines.line.[n].displayAscii
  • Type: String
  • Cardinality: [0..1]
  • MaxLength: 50
Associated Endusers
  • Field Name: associatedEndusers
  • Type: ["Object", "Null"]
  • Cardinality: [0..1]
Enduser
  • Field Name: enduser.[n]
  • Type: Array
User Id *
  • Field Name: lines.line.[n].associatedEndusers.enduser.[n].userId
  • Type: ["String", "Null"]
  • Target: device/cucm/User
  • Target attr: userid
  • Cardinality: [1..1]
  • Format: uri
Ring Setting Default: Ring
  • Field Name: lines.line.[n].ringSetting
  • Type: String
  • Cardinality: [0..1]
  • Default: Ring
  • Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
Consecutive Ring Setting Consecutive Rings Setting. Replaces the consective ring setting on IPPhone. Default: Use System Default
  • Field Name: lines.line.[n].consecutiveRingSetting
  • Type: ["String", "Null"]
  • Cardinality: [0..1]
  • Default: Use System Default
  • Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
Recording Profile Name
  • Field Name: lines.line.[n].recordingProfileName
  • Type: ["String", "Null"]
  • Cardinality: [0..1]
Index
  • Field Name: lines.line.[n].index
  • Type: Integer
  • Cardinality: [1..1]
Ring Setting Active Pickup Alert Applicable only for IP Phones Default: Use System Default
  • Field Name: lines.line.[n].ringSettingActivePickupAlert
  • Type: ["String", "Null"]
  • Cardinality: [0..1]
  • Default: Use System Default
  • Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
Label
  • Field Name: lines.line.[n].label
  • Type: ["String", "Null"]
  • Cardinality: [0..1]
  • MaxLength: 50
Recording Media Source Default: Gateway Preferred
  • Field Name: lines.line.[n].recordingMediaSource
  • Type: String
  • Cardinality: [0..1]
  • Default: Gateway Preferred
  • Choices: ["Gateway Preferred", "Phone Preferred"]
Max Num Calls Default: 2
  • Field Name: lines.line.[n].maxNumCalls
  • Type: Integer
  • Cardinality: [0..1]
  • Default: 2
Partition Usage This tag cannot be modified. It can only be specified in the add request. Default: General
  • Field Name: lines.line.[n].partitionUsage
  • Type: String
  • Cardinality: [0..1]
  • Default: General
  • Choices: ["Intercom", "Call Control Discovery Learned Pattern", "General", "Directory URI"]
Recording Flag Default: Call Recording Disabled
  • Field Name: lines.line.[n].recordingFlag
  • Type: String
  • Cardinality: [0..1]
  • Default: Call Recording Disabled
  • Choices: ["Call Recording Disabled", "Automatic Call Recording Enabled", "Selective Call Recording Enabled"]
Speed Dial
  • Field Name: lines.line.[n].speedDial
  • Type: ["String", "Null"]
  • Cardinality: [0..1]
Monitoring Css Name
  • Field Name: lines.line.[n].monitoringCssName
  • Type: ["String", "Null"]
  • Cardinality: [0..1]
E164Mask
  • Field Name: lines.line.[n].e164Mask
  • Type: ["String", "Null"]
  • Cardinality: [0..1]
  • MaxLength: 255
Missed Call Logging Default: True
  • Field Name: lines.line.[n].missedCallLogging
  • Type: Boolean
  • Cardinality: [0..1]
  • Default: True
Call Info Display
  • Field Name: callInfoDisplay
  • Type: ["Object", "Null"]
  • Cardinality: [0..1]
Dialed Number Default: True
  • Field Name: lines.line.[n].callInfoDisplay.dialedNumber
  • Type: Boolean
  • Cardinality: [0..1]
  • Default: True
Redirected Number
  • Field Name: lines.line.[n].callInfoDisplay.redirectedNumber
  • Type: Boolean
  • Cardinality: [0..1]
Caller Number
  • Field Name: lines.line.[n].callInfoDisplay.callerNumber
  • Type: Boolean
  • Cardinality: [0..1]
Caller Name Default: True
  • Field Name: lines.line.[n].callInfoDisplay.callerName
  • Type: Boolean
  • Cardinality: [0..1]
  • Default: True
Dirn Only uuid attribute is returned in response
  • Field Name: dirn
  • Type: ["Object", "Null"]
  • Cardinality: [1..1]
Inventory Filter Default: default
  • Field Name: lines.line.[n].dirn.line_filter
  • Type: String
  • Default: default
  • Choices: ["Default", "Show Unused Numbers with Associated E164's (Site Only)", "Show Unused Numbers with Associated E164's", "Show Used Numbers (Site Only)", "Show Used Numbers", "Show Numbers belonging to this Subscriber"]
Pattern *
  • Field Name: lines.line.[n].dirn.pattern
  • Type: String
  • Cardinality: [1..1]
Route Partition Name *
  • Field Name: lines.line.[n].dirn.routePartitionName
  • Type: ["String", "Null"]
  • Target: device/cucm/RoutePartition
  • Target attr: name
  • Cardinality: [1..1]
  • Format: uri
Mwl Policy Default: Use System Policy
  • Field Name: lines.line.[n].mwlPolicy
  • Type: String
  • Cardinality: [0..1]
  • Default: Use System Policy
  • Choices: ["Use System Policy", "Light and Prompt", "Prompt Only", "Light Only", "None"]
Ring Setting Idle Pickup Alert Applicable only for IP Phones Default: Use System Default
  • Field Name: lines.line.[n].ringSettingIdlePickupAlert
  • Type: ["String", "Null"]
  • Cardinality: [0..1]
  • Default: Use System Default
  • Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]
Busy Trigger Default: 1
  • Field Name: lines.line.[n].busyTrigger
  • Type: Integer
  • Cardinality: [0..1]
  • Default: 1
Audible Mwi Not applicable for gatewayEndpointAnalogAccess and CiscoCatalyst600024PortFXSGateway Default: Default
  • Field Name: lines.line.[n].audibleMwi
  • Type: String
  • Cardinality: [0..1]
  • Default: Default
  • Choices: ["Off", "On", "Default"]
Display
  • Field Name: lines.line.[n].display
  • Type: String
  • Cardinality: [0..1]
  • MaxLength: 50
Calling Party Transformation CSS Choose the calling search space for transformations. This setting allows you to localize the calling party number on the device. Make sure that the Calling Party Transformation CSS that you choose contains the calling party transformation pattern that you want to assign to this device. Note    The partitions in the calling search space should contain only calling party transformations. Note    Ensure the calling search space is not null because no transformations can apply to null partitions. Note    The device takes on the attributes of the Calling Party Transformation Pattern because you assign the pattern to a partition where the Calling Party Transformation CSS exists. For example, when you configure the Calling Party Transformation CSS under Call Routing > Class of Control > Calling Search Space, you assign the CSS to a partition; when you configure the Calling Party Transformation CSS under Call Routing > Transformation Pattern > Calling Party Transformation Pattern, you choose the partition where the Calling Party Transformation CSS is assigned.
  • Field Name: cgpnTransformationCssName
  • Type: ["String", "Null"]
  • Target: device/cucm/Css
  • Target attr: name
  • Cardinality: [0..1]
  • Format: uri
Calling Search Space AAR Choose a calling search space to be used to route Cisco Unified Mobility calls. Note    Ensure that the gateway that is configured for routing mobile calls is assigned to the partition that belongs to the Rerouting Calling Search Space. Cisco Unified Communications Manager determines how to route calls based on the remote destination number and the Rerouting Calling Search Space. Note    The Rerouting Calling Search Space setting applies only when you are routing calls to the remote destination or mobility identity, which specifies the outbound call leg toward the remote destination or mobility identity when a call comes in to the user enterprise number. Note    Cisco Unified Mobility calls do not get routed to the dual-mode mobility identity number that corresponds to the dual-mode mobile phone number if the device associates with the enterprise WLAN and registers with Cisco Unified Communications Manager. Cisco Unified Mobility calls get routed to the dual-mode mobility identity number only when the device is outside the enterprise.
  • Field Name: automatedAlternateRoutingCssName
  • Type: ["String", "Null"]
  • Target: device/cucm/Css
  • Target attr: name
  • Cardinality: [0..1]
  • Format: uri
Device Pool * Choose the device pool that applies to this profile. The device pool defines sets of common characteristics for devices, such as region, date/time group, softkey template, and MLPP information.
  • Field Name: devicePoolName
  • Type: ["String", "Null"]
  • Target: device/cucm/DevicePool
  • Target attr: name
  • Cardinality: [1..1]
  • Format: uri