[Index]

Model: relation/HcsCerVirtualREL

CER Servers

Complete this procedure at any time to configure Cisco Emergency Responder (CER) on VOSS-4-UC. For more information on CER installation and setup, refer to the Cisco Emergency Responder Administration Guide.

Procedure

1. Log in as the appropriate hierarchy administrator.

2. Set the hierarchy path to the correct level. Shared instances are created at the provider, reseller, or customer level. Dedicated instances are created at the customer level.

3. Choose Device Management > CER > Servers.

4. Perform one of the following:

   • To add a new Cisco Emergency Responder (CER) in VOSS-4-UC, click Add.
   • To modify an existing CER, click its name in the list of Cisco Emergency Responders.

5. Enter a name for the Cisco Emergency Responder in the CER_Virtual Server Name field.

   Note:

   A Cisco Emergency Responder server that has been configured in HCM-F and synced into VOSS-4-UC may exist at the sys.hcs hierarchy. If the server name you enter matches this server, the Migrate from HCM-F to VOSS-4-UC check box is displayed. Click Save to migrate this server to the current hierarchy level. The fields will be populated with the values that were configured in HCM-F. If you do not want to migrate the server, enter a different server name.

6. Select the Publisher check box if you are configuring a publisher node.

   Note:

   The Publisher tab is populated only when the Publisher check box is selected.

7. Expand Network Addresses.

   1. Choose the SERVICE_PROVIDER_SPACE address space.

   2. Enter the IP address of the CER Server in the IPV4 Address field.

      Note:

      Either the hostname or the IP address is required. Ensure that the hostname or IP address does not contain a trailing blank space. VOSS-4-UC cannot validate an entry that contains a blank space at the end of the hostname or IP address.

   3. The Hostname field is automatically populated with the CER Name. Edit it if necessary.

   4. Fill in the domain of the CER application.

   5. Provide an optional description for the network address.

8. Expand Credentials.

   1. Add credentials for PLATFORM and ADMIN credential types. Click + to add more credentials.
   2. Fill in the user ID and password that you configured when you installed the CER.
   3. Choose RO (Read-only) or RW (Read or Write) for the Access Type. The default is RO.
   4. Provide an optional description for the credential.

   PLATFORM and ADMIN are required for license management.

9. On the Publisher tab, you can specify the following information:

10. Click Save.

What to Do Next

Associate CER with Customers

Model Details