.. _rsm_create_phones:

Create Phones
-------------

Procedure
.........

1. Choose **Subscriber Management > Phones**, and then click **Add**.
2. From the **Hierarchy** drop-dow, choose the site and click **OK**.
3. On the **Phone** tab in the **Device Name** field, enter the device name and
   add SEP before the mac address. For example, if the mac address is 000000000AB1
   the device name must be SEP000000000AB1.
4. From the **Product** drop-down, choose the product type as **Cisco 7941**.
5. (Optional) In the **Description** field, enter the phone description.
6. From the **Device Protocol** drop-down, choose **SIP**.
7. From the **Device Pool Name** drop-down, choose **RSMSimPhone_DP**.
8. From the **Lines** tab, click '+' next to **Line** and from the **Pattern**
   drop-down, choose the directory number.
9. From the **Monitoring CSS Name** drop-down, set the Monitoring Calling Search
   Space as the CSS that is configured in the Calling Search Space field in the
   **Lines** page.
10. In the **Busy Trigger** field, enter a busy trigger value as **1**, and in the
    **Max Num Calls** field, enter the maximum number of calls value as **2**.