An asterisk * in the title indicates the field is mandatory.
If a field has a default value, it is shown in the Description column.
If the field type is an array, the Field Name has a .[n] suffix, where n is the array index placeholder.
Object and array field names are listed to provide context. If a field belongs to an object or an array, the full field name is shown in dot separated notation.

Title

Description

Details

Mlpp Preemption Disabled

Check this check box to make the numbers in a transformation pattern nonpreemptable. Note For MLPP Preemption Disabled check box to work, create the transformation patterns and put them into partitions, import all such partitions into a CSS (for example, NonPreemptionCSS), and select the CSS in "Non-Preemption Pattern CSS" service parameter (System > Service Parameters).

Field Name: mlppPreemptionDisabled
Type: Boolean
Cardinality: [0..1]

Calling Party Number Type

Choose the format for the number type in calling party directory numbers. Cisco Unified Communications Manager sets the calling directory number (DN) type. Cisco recommends that you do not change the default value unless you have advanced experience with dialing plans such as NANP or the European dialing plan. You may need to change the default in Europe because Cisco Unified Communications Manager does not recognize European national dialing patterns. You can also change this setting when you are connecting to a PBX that expects the calling directory number to be encoded to a non national type numbering plan. Choose one of the following options: Cisco Unified Communications Manager—Use when the Cisco Unified Communications Manager sets the directory number type. Unknown—Use when the dialing plan is unknown. National—Use when you are dialing within the dialing plan for your country. International—Use when you are dialing outside the dialing plan for your country. Subscriber—Use when you are dialing a subscriber by using a shortened subscriber number. Default: Cisco CallManager

Field Name: callingPartyNumberType
Type: String
Cardinality: [0..1]
Default: Cisco CallManager
Choices: ["Cisco CallManager", "Unknown", "National", "International", "Subscriber"]

Description

Enter a description of the transformation pattern.

Field Name: description
Type: String
Cardinality: [0..1]

Calling Party Prefix Digits

Enter prefix digits in the Prefix Digits (Outgoing Calls) field. Valid entries include the digits 0 through 9, the wildcard characters asterisk (*) and octothorpe (#), and the international escape character +. Note The appended prefix digit does not affect which directory numbers route to the assigned device.

Field Name: callingPartyPrefixDigits
Type: ["String", "Null"]
Cardinality: [0..1]
MaxLength: 50
Pattern: ^[0-9*#+]{0,50}$

Pattern *

Enter the transformation pattern, including numbers and wildcards (do not use spaces); for example, for NANP, enter 9.@ for typical local access or 8XXX for a typical private network numbering plan. Valid characters include the uppercase characters A, B, C, and D and \+, which represents the international escape character +. Note Ensure that the pattern is unique. Check the transformation pattern, route pattern, translation pattern, directory number, call park number, call pickup number, message waiting on/off, or meet me number if you receive an error that indicates duplicate entries. You can also check the route plan report.

Field Name: pattern
Type: String
Cardinality: [1..1]

Dial Plan Name

Choose a numbering plan.

Field Name: dialPlanName
Type: ["String", "Null"]
Target: device/cucm/DialPlan
Target attr: name
Cardinality: [0..1]
Format: uri

Route Filter Name

If your transformation pattern includes the @ wildcard, you may choose a route filter. The optional act of choosing a route filter restricts certain number patterns. The route filters that display depend on the numbering plan that you choose from the Numbering Plan drop-down list box. You can configure the number of items that display in this drop-down list box by using the Max List Box Items enterprise parameter. If more route filters exist than the Max List Box Items enterprise parameter specifies, the Find button displays next to the drop-down list box. Click the Find button to display the Find and List Route Filters window, then find and choose a route filter name. Note To set the maximum list box items, choose System > Enterprise Parameters and choose CCMAdmin Parameters.

Field Name: routeFilterName
Type: ["String", "Null"]
Target: device/cucm/RouteFilter
Target attr: name
Cardinality: [0..1]
Format: uri

Calling Party Numbering Plan

Choose the format for the numbering plan in calling party directory numbers. Cisco Unified Communications Manager sets the calling DN numbering plan. Cisco recommends that you do not change the default value unless you have advanced experience with dialing plans such as NANP or the European dialing plan. You may need to change the default in Europe because Cisco Unified Communications Manager does not recognize European national dialing patterns. You can also change this setting when you are connecting to PBXs by using routing as a non-national type number. Choose one of the following options: Cisco Unified Communications Manager—Use when the Cisco Unified Communications Manager sets the Numbering Plan in the directory number. ISDN—Use when you are dialing outside the dialing plan for your country. National Standard—Use when you are dialing within the dialing plan for your country. Private—Use when you are dialing within a private network. Unknown—Use when the dialing plan is unknown. Default: Cisco CallManager

Field Name: callingPartyNumberingPlan
Type: String
Cardinality: [0..1]
Default: Cisco CallManager
Choices: ["Cisco CallManager", "ISDN", "National Standard", "Private", "Unknown"]

Calling Line Presentation Bit

Cisco Unified Communications Manager uses calling line ID presentation (CLIP/CLIR) as a supplementary service to allow or restrict the originating caller phone number on a call-by-call basis. Choose whether you want the Cisco Unified Communications Manager to allow or restrict the display of the calling party phone number on the called party phone display for this route pattern. Choose Default if you do not want to change calling line ID presentation. Choose Allowed if you want Cisco Unified Communications Manager to allow the display of the calling number. Choose Restricted if you want Cisco Unified Communications Manager to block the display of the calling number. Default: Default

Field Name: callingLinePresentationBit
Type: String
Cardinality: [0..1]
Default: Default
Choices: ["Default", "Allowed", "Restricted"]

Digit Discard Instruction Name

Field Name: digitDiscardInstructionName
Type: ["String", "Null"]
Target: device/cucm/DiscardDigitInstruction
Target attr: name
Cardinality: [0..1]
Format: uri

Use Calling Party Phone Mask

Check the check box if you want the full, external phone number to be used for calling line identification (CLID) on outgoing calls. You may also configure an External Phone Number Mask on all phone devices. Default: Default

Field Name: useCallingPartyPhoneMask
Type: String
Cardinality: [0..1]
Default: Default
Choices: ["Off", "On", "Default"]

Route Partition Name *

If you want to use a partition to restrict access to the transformation pattern, choose the desired partition from the drop-down list box. You can configure the number of partitions that display in this drop-down list box by using the Max List Box Items enterprise parameter. If more partitions exist than the Max List Box Items enterprise parameter specifies, the Find button displays next to the drop-down list box. Click the Find button to display the Find and List Partitions window, then find and choose a partition name. Note Configure transformation patterns in different non-null partitions rather than dialing patterns such as route patterns and directory numbers. For transformation pattern lookups, Cisco Unified Communications Manager ignores the patterns in null partitions. Note To set the maximum list box items, choose System > Enterprise Parameters and choose CCMAdmin Parameters. Note Make sure that the combination of pattern, route filter, and partition is unique within the Cisco Unified Communications Manager cluster.

Field Name: routePartitionName
Type: ["String", "Null"]
Target: device/cucm/RoutePartition
Target attr: name
Cardinality: [1..1]
Format: uri

Calling Party Transformation Mask

Enter a transformation mask value. Valid entries include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +. If the Discard Digit Instructions field is blank, the Prefix Digits (Outgoing Calls) field is blank, the Calling Party Transformation Mask field is blank, and the Use Calling Party's External Phone Number Mask is not checked, no calling party transformation takes place.

Field Name: callingPartyTransformationMask
Type: ["String", "Null"]
Cardinality: [0..1]
MaxLength: 50
Pattern: ^[0-9*#+X]{0,50}$

Model: device/cucm/CallingPartyTransformationPattern

Model Details