Configure Device

Procedure

1. In VOSS-4-UC, choose Subscriber Management > Phones.

2. Choose audio forking phone configured.

3. On the Phone tab, in the Vendor Config section of the screen, from the Built In Bridge drop-down, change the setting to On.

4. On the Lines tab, click ‘+’ next to Line and click the required line to access the line details.

5. From the Recording Profile Name drop-down, choose the recording profile created using CUCM.

   If using a recording service provider, choose Automatic Call Recording Enabled from the Recording Flag drop-down, as per the recording service provider recommendations. If not using a recording service provider, choose Call Recording Disabled.

6. Click Save.