Add an IOS device in VOSS-4-UC at the Customer level hierarchy. To add an IOS device, see Set up an IOS Device.

There are few scenarios that show the expected behaviour of an Analog gateway when adding, deleting, or modifying a gateway.

Model Details

Successful Scenario	Failure Scenario
Adding an Analog device with a phone line.	Removing the phone line from the endpoint.
Adding an Analog gateway without using enable command builder.	Adding a phone line after adding the command builder.
Removing the command builder after adding an analog gateway with command builder.	Adding an analog gateway without a phone line after adding a phone line to an endpoint. Note: Ensure to add the Directory Names to both endpoints.

Field	Description
IOS Device *	Choose the required IOS Device from the drop-down list. For example: IOS 11. This is a mandatory field. Note: The IOS device identifies the devices that are not associated with any Analog Gateways.
Product *	Choose the product from the drop-down list. For example: VG202, where VG represents Voice Gateway and 202 represents port. It has 2 ports, 0 and 1. This is a mandatory field. Note: The analog gateway supports Following models: VG202: 2 ports VG204: 4 ports VG224: 24 ports VG310: 24 ports VG320: 48 ports VG350: 144/160 ports
Protocol *	Choose the protocol from the drop-down list. The available protocols are SCCP and MGCP. This is a mandatory field.
Gateway Name *	Enter the MAC address of the analog gateway. For example: SKIGW0102030405, where SKI represents SCCP, GW represents gateway, and the last 10 digits represents the MAC address of the gateway. This is a mandatory field for the SCCP protocol.
Domain Name	Enter a fully qualified domain name. For example: E7C1VG310.hcsent17.com. This is a mandatory field for the MGCP protocol.
Call Manager Group *	Choose the call manager group from the drop-down list. For example: Default. This is a mandatory field. Note: Call Manager Group is default based on the site default device pool.
Enable Command Builder	Leave the check box cleared to generate IOS commands, when Analog Gateway is added, deleted, or modified.

Field	Description
Gateway Network Interface *	Enter a Gateway Network Interface. For example: FastEthernet0/0, FastEthernet0/1 or GigabitEthernet0/0, GigabitEthernet0/1. This is a mandatory field. Note: Check the network interface at the Physical Device, then choose the appropriate Network Interface and Port as applicable. The Network Interface is used in Command Generation. Choose FastEthernet for all 2x series and GigabitEthernet for all 3x series.
Call Disconnect Timeout *	Enter the time unit for Call Disconnect Timeout. For example: 2. This is a mandatory field. Note: The time unit always is in seconds. Do not enter any negative timer values.
CP Tone *	Choose the call progress tone (country code) from the drop-down list. For example: in (for India). This is a mandatory field. Note: CP Tone is an FXS configuration parameter that supports each analog device in the gateway.
Signal *	Choose a signal from the drop-down list. For example: loop-start or ground-start. This is a mandatory field. Note: Signal is an FXS configuration parameter that supports each analog device in the gateway.

Field	Description
Slot *	Choose the required value from the drop-down list. For example: 0. This is a mandatory field Note: Add only those Units (Modules) and Subunits that are listed in the drop-down list, without duplicate the units and subunit numbers. If duplicating entry is made for a slot, then the new slot overwrites the older configuration. You may lose previously configured endpoints. For VG310 model, do not choose any module for slot 1.
Module *	Choose the available module from the drop-down list. For example: NM-4VWIC-MBRD. Note: Only modules that are available for the slot appear in the list.
Subunits *	Click + to expand Subunits. This is a mandatory field.
Subunit Position *	Choose the subunit position from the drop-down list. For example: 0. Note: Subunit position 1 on the VG310 gateway has no available hardware by design, so choosing a value of 1 in this drop-down will not allow you to continue. Please choose a different subunit position to continue setting up your gateway.
Subunit *	Choose the subunit from the drop-down list. For example: VIC3-2FXS-E/DID-SCCP.

Option	Description
Gateway Name	This read-only field is populated from the analog gateway for the SCCP protocol. This is a mandatory field.
Slot *	This read-only field is populated from the gateway units. This is a mandatory field.
Subunit Position *	This read-only field is populated from the gateway units. This is a mandatory field.
Port Number *	This read-only field is populated from the gateway units. This is a mandatory field.
Product Type *	Choose the product type from the drop-down list. For example: Analog Phone. This is a mandatory field.
Device Protocol *	Choose the device protocol from the drop-down list. This is a mandatory field.
Device Name *	This read-only field is populated from the analog gateway. This is a mandatory field.
Description	When the endpoint is added, the default description is in the format: Endpoint for slot/subunit/port n/n/n gateway @domain that can be updated if required. This is an optional field and accepts a string value.
Device Pool *	Choose the device pool from the drop-down list. For example: Cu2Si2-DevicePool. This is a mandatory field.
Phone Button Template *	Choose the phone button template from the drop-down list. For example: Standard Analog. This has a specific phone button template for the analog gateway. This is a mandatory field.
Common Phone Profile *	Choose the common phone profile from the drop-down list. For example: Standard Common Phone Profile. It includes the attributes (services or features) that are associated with a particular user. This is a mandatory field.
Calling Search Space	From the drop-down list, choose the appropriate calling search space. The calling search space specifies a collection of partitions that are searched to determine how a collected (originating) number should be routed.
AAR Calling Search Space	Choose the appropriate calling search space for the device to use when it performs automated alternate routing (AAR). The AAR calling search space specifies the collection of route partitions that are searched to determine how to route a collected (originating) number that is otherwise blocked due to insufficient bandwidth.
Media Resource Group List	This list provides a prioritized grouping of media resource groups. An application chooses the required media resource, such as a Music On Hold server, from among the available media resources according to the priority order that a Media Resource Group List defines.
Location *	Choose a location from the drop-down list. For example: Cu2Si2-Location. This is a mandatory field.
AAR Group	Specify the automated alternate routing (AAR) group for this device. The AAR group provides the prefix digits that are used to route calls that are otherwise blocked due to insufficient bandwidth.
Owner	Choose from the drop-down list.

Option	Description
Always Use Prime Line for Voice Message	Choose the required options from the drop-down list. For example: On, Off or Default. This is a mandatory field. This specifies whether the device will always use the prime line for voice messages.
Geolocation	From the drop-down list, choose a geolocation. You can choose the Unspecified geolocation, which designates that this device does not associate with a geolocation.
Transmit UTF-8 for Calling Party Name	Keep the check box clear.
Called Party Transformation CSS	This setting allows you to send transformed called party number in SETUP message for outgoing calls. Make sure that the Called Party Transformation CSS that you choose contains the called party transformation pattern that you want to assign to this device. Note: If the Called Party Transformation CSS is configured as <None>, the transformation does not match and does not get applied. Ensure that you configure the Called Party Transformation CSS in a non-null partition that is not used for routing.
Use Device Pool Called Party Transformation CSS	Select the check box.
Allow Control Of Device From CTI	Select the check box.
Logged Into Hunt Group	Select the check box.
Calling Party Transformation CSS (Caller ID For Calls From This Phone)	This setting allows you to send transformed calling party number in SETUP message for outgoing calls. Also when redirection occurs for outbound calls, this CSS will be used to transform the connected number sent from Cisco Unified Communications Manager side in outgoing NOTIFY messages. Make sure that the Calling Party Transformation CSS that you choose contains the calling party transformation pattern that you want to assign to this device. Note: If the Calling Party Transformation CSS is configured as <None>, the transformation does not match and does not get applied. Ensure that you configure the Calling Party Transformation Pattern in a non-null partition that is not used for routing.
Use Device Pool Calling Party Transformation CSS (Caller ID for Calls From This Phone)	Select the check box.
Calling Party Transformation CSS (Device Mobility Related Information)

Field	Description
Use Device Pool Calling Party Transformation CSS (Device Mobility Related Information)	Select the check box.
BLF Presence Group *	Choose the presence group for busy lamp field buttons from the drop-down list. For example: Standard Presence group is the default value. This is a mandatory field.
Device Security Profile *	Choose options from the drop-down list. For example: Analog Phone - Standard SCCP Non-Secure Profile. This is mandatory field.
MLPP Domain	If you leave the value <None>, this device inherits its MLPP domain from the value that was set for the device pool of this device. If the device pool does not have an MLPP Domain setting, this device inherits its MLPP domain from the value that was set for the MLPP Domain Identifier enterprise parameter.
MLPP Indication	Choose options from the drop-down list. For example: On, Off, or Default. This is a mandatory field.
MLPP Preemption	Choose options from the drop-down list. For example: Disabled, Forceful, Default. This is a mandatory field. Note: If there are any changes to be performed to analog phone line then do not refer line settings. For example: Changing CSS is done under Subscriber Management.
Line	Click + to expand Line.
Pattern *	Choose the route pattern from the drop-down list. For example: 08231006
Enduser	Click + to expand Enduser.
User ID	Choose the available user ID from the drop-down list. For example: Subscriber 1
Product Specific Configuration Layout	Click + to expand Product Specific Configuration Layout.
Key	Enter the Key for the product specific configuration layout. For example: stcappRegCap.
Value	Enter the Key for the product specific configuration layout. For example: 0.

Option	Description
Domain Name	This read-only field is populated from the analog gateway for the MGCP protocol. This is a mandatory field.
Slot *	This read-only field is populated from the gateway units. This is a mandatory field.
Subunit Position *	This read-only field is populated from the gateway units. This is a mandatory field.
Port Number *	This read-only field is populated from the gateway units. This is a mandatory field.
Product Type *	Choose the product type from the drop- down list. For example: Analog Phone. This is a mandatory field.
Device Protocol *	Choose the device protocol from the drop-down list. For example: SCCP. This is a mandatory field.
Protocol Side *	This is a read-only field except when creating a device. This is a mandatory field.
Class *	This is a read-only field except when creating a device. This is a mandatory field.
Device Name *	This read-only field is populated from the analog gateway. This is a mandatory field.
Description	When the endpoint is added, the default description is in the format: Endpoint for slot/subunit/port n/n/n gateway @domain. Update it with an optional description for the device. This is an optional field and accepts a string value.
Device Pool	Choose the device pool from the drop-down list. For example: Cu2Si2-DevicePool. This is a mandatory field.
Calling Search Space	Choose the space name from the drop-down list. This is an optional field.
Common Device Configuration	Specify the Configuration name of the device. This is an optional field.
Network Locale	Choose the location from the drop-down list. This is an optional field.
Location *	Choose a location from the drop-down list. For example: Cu2Si2-Location. This is a mandatory field.
Media Resource Group List	Choose a media resource to allocate for a device. This is an optional field.
AAR calling search space	Choose the appropriate calling search space for the device to use when it performs automated alternate routing (AAR) from the drop-down list. This is an optional field.

Field	Description
Use Trusted Relay Point	Choose one of the following values: Off - Choose this value to disable the use of a Trusted Relay Point (TRP) with this device. This setting overrides the Use Trusted Relay Point setting in the common device configuration with which this device associates. On - Choose this value to enable the use of a TRP with this device. This setting overrides the Use Trusted Relay Point setting in the common device configuration with which this device associates. Default - If you choose this value, the device uses the Use Trusted Relay Point setting from the common device configuration with which this device associates.
AAR Group	Specify the automated alternate routing (AAR) group for this device. The AAR group provides the prefix digits that are used to route calls that are otherwise blocked due to insufficient bandwidth.
Geolocation	Specify the location name. This is an optional field.
Transmit UTF-8 for Calling Perty Name MLPP Preemption	Keep the check box cleared.
Port Number *	Configure the ports for the MGCP Endpoint. This is a mandatory field.
Trunk *	This field value auto-populates depending on the value set for the Port Number. This is a mandatory field.
Trunk Direction *	The field value auto-populates depending on the value set for the Number. This is a mandatory field.
Trunk Level *	The field value auto-populates depending on the value set for the Number. This is a mandatory field.
Attendant DN	Specify this field for group start and loop start. This is a mandatory field.
Prefix DN	Enter the prefix digits that are appended to the digits that this trunk receives on incoming calls.
Num Digits *	Enter the number of significant digits to collect between 0 to 32.
Expected Digits *	Enter the number of digits that are expected on the inbound side of the trunk. You can leave zero as the default value, if you are unsure.

Field	Description
SMDI Port Number (0 - 4096) *	Enter the first SMDI port number of the T1 span. If you set this parameter to a nonxero value and this gateway belongs to an unknown type of route list, route group, or route list, hunting does not continue beyond this span.
Unattended Port	Select this check box to indicate an unattended port on this device.
Line	Click + to expand Line.
Label	Use this field only if you do not want the directory number to show on the line appearance. Enter text that identifies this directory number for a line and phone combination.
E164 Mask	Indicate a phone number (or mask) that is used to send Caller ID information when a call is placed from the line. You can enter a maximum of 24 numbers, the international escape character + and 'X' characters. The Xs represent the directory number and must appear at the end of the pattern. For example, if you specify a mask of 972813XXXX, an external call from extension 1234 displays a caller ID number of 9728131234.
Dirn, Pattern *	Choose the route pattern from the drop-down list. For example: 08231006.
Dirn, Route Partition	Choose the partition to which the directory number belongs. Make sure that the directory number that you enter in the Directory Number field is unique within the partition that you choose. If you do not want to restrict access to the directory number, choose <None> for the partition.
Enduser	Click + to expand Enduser.
User ID	Choose the available user ID from drop-down list. For example: Subscriber 1.
Index	This field is the line position on the device. If left blank, an integer is automatically assigned.
Trunk Selection Order *	Choose the order from the drop-down list to display the call routing logic for the route pattern.

Field	Description
Key	Enter the Key for the product-specific configuration Layout. For example stcappRegCap.
Value	Enter the Key for the product-specific configuration layout. For example: 0.

An asterisk * in the title indicates the field is mandatory.
If a field has a default value, it is shown in the Description column.
If the field type is an array, the Field Name has a .[n] suffix, where n is the array index placeholder.
Object and array field names are listed to provide context. If a field belongs to an object or an array, the full field name is shown in dot separated notation.

Title

Description

Details

Product *

Field Name: product
Type: String
Cardinality: [1..1]
Choices: ["7914 14-Button Line Expansion Module", "7915 12-Button Line Expansion Module", "7915 24-Button Line Expansion Module", "7916 12-Button Line Expansion Module", "7916 24-Button Line Expansion Module", "AIM-VOICE-30", "Analog Phone", "Annunciator", "BEKEM 36-Button Line Expansion Module", "C881V", "C887VA-V", "CKEM 36-Button Line Expansion Module", "CP-8800-Audio 28-Button Key Expansion Module", "CP-8800-Video 28-Button Key Expansion Module", "CTI Port", "CTI Remote Device", "CTI Route Point", "Carrier-integrated Mobile", "Cisco IAD2400", "Cisco 12 S", "Cisco 12 SP", "Cisco 12 SP+", "Cisco 1751", "Cisco 1760", "Cisco 1861", "Cisco 269X", "Cisco 26XX", "Cisco 2801", "Cisco 2811", "Cisco 2821", "Cisco 2851", "Cisco 2901", "Cisco 2911", "Cisco 2921", "Cisco 2951", "Cisco 30 SP+", "Cisco 30 VIP", "Cisco 362X", "Cisco 364X", "Cisco 366X", "Cisco 3725", "Cisco 3745", "Cisco 3825", "Cisco 3845", "Cisco 3905", "Cisco 3911", "Cisco 3925", "Cisco 3925E", "Cisco 3945", "Cisco 3945E", "Cisco 3951", "Cisco 6901", "Cisco 6911", "Cisco 6921", "Cisco 6941", "Cisco 6945", "Cisco 6961", "Cisco 7811", "Cisco 7821", "Cisco 7832", "Cisco 7841", "Cisco 7861", "Cisco 7902", "Cisco 7905", "Cisco 7906", "Cisco 7910", "Cisco 7911", "Cisco 7912", "Cisco 7920", "Cisco 7921", "Cisco 7925", "Cisco 7926", "Cisco 7931", "Cisco 7935", "Cisco 7936", "Cisco 7937", "Cisco 7940", "Cisco 7941", "Cisco 7941G-GE", "Cisco 7942", "Cisco 7945", "Cisco 7960", "Cisco 7961", "Cisco 7961G-GE", "Cisco 7962", "Cisco 7965", "Cisco 7970", "Cisco 7971", "Cisco 7975", "Cisco 7985", "Cisco 881", "Cisco 8811", "Cisco 8821", "Cisco 8831", "Cisco 8832", "Cisco 8832NR", "Cisco 8841", "Cisco 8845", "Cisco 8851", "Cisco 8851NR", "Cisco 8861", "Cisco 8865", "Cisco 8865NR", "Cisco 888/887/886", "Cisco 8941", "Cisco 8945", "Cisco 8961", "Cisco 9951", "Cisco 9971", "Cisco ATA 186", "Cisco ATA 187", "Cisco ATA 190", "Cisco ATA 191", "Cisco Catalyst 4000 Access Gateway Module", "Cisco Catalyst 4224 Voice Gateway Switch", "Cisco Catalyst 6000 12 port FXO Gateway", "Cisco Catalyst 6000 24 port FXS Gateway", "Cisco Catalyst 6000 E1 VoIP Gateway", "Cisco Catalyst 6000 T1 VoIP Gateway", "Cisco Cius", "Cisco Cius SP", "Cisco Collaboration Mobile Convergence", "Cisco Conference Bridge (WS-SVC-CMM)", "Cisco Conference Bridge Hardware", "Cisco Conference Bridge Software", "Cisco DX650", "Cisco DX70", "Cisco DX80", "Cisco Dual Mode for Android", "Cisco Dual Mode for iPhone", "Cisco E20", "Cisco ENCS 5400 ISRV", "Cisco IOS Conference Bridge", "Cisco IOS Enhanced Conference Bridge", "Cisco IOS Enhanced Media Termination Point", "Cisco IOS Enhanced Software Media Termination Point", "Cisco IOS Guaranteed Audio Video Conference Bridge", "Cisco IOS Heterogeneous Video Conference Bridge", "Cisco IOS Homogeneous Video Conference Bridge", "Cisco IOS Media Termination Point", "Cisco IP Communicator", "Cisco ISR 4321", "Cisco ISR 4331", "Cisco ISR 4351", "Cisco ISR 4431", "Cisco ISR 4451", "Cisco ISR 4461", "Cisco Jabber for Tablet", "Cisco MGCP BRI Port", "Cisco MGCP E1 Port", "Cisco MGCP FXO Port", "Cisco MGCP FXS Port", "Cisco MGCP T1 Port", "Cisco Media Server (WS-SVC-CMM-MS)", "Cisco Media Termination Point (WS-SVC-CMM)", "Cisco Media Termination Point Hardware", "Cisco Media Termination Point Software", "Cisco Meeting Server", "Cisco Spark Remote Device", "Cisco TelePresence", "Cisco TelePresence 1000", "Cisco TelePresence 1100", "Cisco TelePresence 1300-47", "Cisco TelePresence 1300-65", "Cisco TelePresence 200", "Cisco TelePresence 3000", "Cisco TelePresence 3200", "Cisco TelePresence 400", "Cisco TelePresence 500-32", "Cisco TelePresence 500-37", "Cisco TelePresence Codec C40", "Cisco TelePresence Codec C60", "Cisco TelePresence Codec C90", "Cisco TelePresence Conductor", "Cisco TelePresence DX70", "Cisco TelePresence EX60", "Cisco TelePresence EX90", "Cisco TelePresence Exchange System", "Cisco TelePresence IX5000", "Cisco TelePresence MCU", "Cisco TelePresence MX200", "Cisco TelePresence MX200 G2", "Cisco TelePresence MX300", "Cisco TelePresence MX300 G2", "Cisco TelePresence MX700", "Cisco TelePresence MX800", "Cisco TelePresence MX800 Dual", "Cisco TelePresence Profile 42 (C20)", "Cisco TelePresence Profile 42 (C40)", "Cisco TelePresence Profile 42 (C60)", "Cisco TelePresence Profile 52 (C40)", "Cisco TelePresence Profile 52 (C60)", "Cisco TelePresence Profile 52 Dual (C60)", "Cisco TelePresence Profile 65 (C60)", "Cisco TelePresence Profile 65 Dual (C90)", "Cisco TelePresence Quick Set C20", "Cisco TelePresence SX10", "Cisco TelePresence SX20", "Cisco TelePresence SX80", "Cisco TelePresence TX1310-65", "Cisco TelePresence TX9000", "Cisco TelePresence TX9200", "Cisco Unified Client Services Framework", "Cisco Unified Communications for RTX", "Cisco Unified Mobile Communicator", "Cisco Unified Personal Communicator", "Cisco VG200", "Cisco VG248 Gateway", "Cisco VGC Phone", "Cisco VGC Virtual Phone", "Cisco VGD-1T3", "Cisco VXC 6215", "Cisco Video Conference Bridge(IPVC-35xx)", "Cisco Voice Mail Port", "Cisco Webex DX80", "Cisco Webex Room 55", "Cisco Webex Room 55 Dual", "Cisco Webex Room 70 Dual", "Cisco Webex Room 70 Dual G2", "Cisco Webex Room 70 Single", "Cisco Webex Room 70 Single G2", "Cisco Webex Room Kit", "Cisco Webex Room Kit Mini", "Cisco Webex Room Kit Plus", "Communication Media Module", "EMCC Base Phone", "FLEX_SLOT", "Gatekeeper", "Generic Desktop Video Endpoint", "Generic Multiple Screen Room System", "Generic Single Screen Room System", "H.225 Trunk (Gatekeeper Controlled)", "H.323 Client", "H.323 Gateway", "Hunt List", "IAD2400_ANALOG", "IAD2400_DIGITAL", "IMS-integrated Mobile (Basic)", "IP-STE", "ISDN BRI Phone", "Inter-Cluster Trunk (Gatekeeper Controlled)", "Inter-Cluster Trunk (Non-Gatekeeper Controlled)", "Interactive Voice Response", "Load Simulator", "Motorola CN622", "Music On Hold", "NM-1V", "NM-2V", "NM-4VWIC-MBRD", "NM-HD-1V", "NM-HD-2V", "NM-HD-2VE", "NM-HDA", "NM-HDV", "NM-HDV2-0PORT", "NM-HDV2-1PORT", "NM-HDV2-2PORT", "Nokia S60", "PA-MCX", "PA-VXA", "PA-VXB", "PA-VXC", "Pilot", "Remote Destination Profile", "Route List", "SCCP Device", "SCCP gateway virtual phone", "SIP Trunk", "SIP WSM Connection", "SPA8800", "Third-party AS-SIP Endpoint", "Third-party SIP Device (Advanced)", "Third-party SIP Device (Basic)", "Transnova S3", "Universal Device Template", "Unknown", "VG202", "VG204", "VG224", "VG310", "VG320", "VG350", "VG400", "VG450", "VGC Port", "VIC_SLOT", "VKEM 36-Button Line Expansion Module", "VNM-HDA", "VWIC_SLOT", "WS-SVC-CMM-MS", "WS-X6600"]

Call Manager Group Name

Field Name: callManagerGroupName
Type: String
Target: device/cucm/CallManagerGroup
Target attr: name
Cardinality: [1..1]
Format: uri

Protocol *

Field Name: protocol
Type: String
Cardinality: [1..1]
Choices: ["SCCP", "Digital Access PRI", "H.225", "Analog Access", "Digital Access T1", "Route Point", "Unicast Bridge", "Multicast Point", "Inter-Cluster Trunk", "RAS", "Digital Access BRI", "SIP", "MGCP", "Static SIP Mobile Subscriber", "SIP Connector", "Remote Destination", "Mobile Smart Client", "Digital Access E1 R2", "CTI Remote Device", "Protocol Not Specified"]

Description

Field Name: description
Type: String
Cardinality: [0..1]

Domain Name *

For SCCP mention MAC Address

Field Name: domainName
Type: String
Cardinality: [1..1]

Vendor Config

Field Name: vendorConfig.[n]
Type: Array

Value

Field Name: vendorConfig.[n].value
Type: Any

Key

Field Name: vendorConfig.[n].key
Type: String

Units

Field Name: units
Type: ["Object", "Null"]
Cardinality: [0..1]

Unit

Field Name: unit.[n]
Type: Array
Cardinality: [1..n]

Index *

Field Name: units.unit.[n].index
Type: Integer
Cardinality: [1..1]

Product *

Field Name: units.unit.[n].product
Type: ["String", "Null"]
Cardinality: [1..1]
Choices: ["AIM-VOICE-30 (2 subunits)", "AIM-VOICE-30-SLOT-0 (3 subunits- slot 0 only)", "ANALOG", "DIGITAL", "ENCS-1NIM-MBRD", "EVM-HD", "FLEX-SLOT", "GENERIC-SLOT", "ISR-2NIM-MBRD", "ISR-3NIM-MBRD", "NM-1V", "NM-2V", "NM-3VWIC-MBRD", "NM-4VWIC-MBRD", "NM-HD-1V", "NM-HD-2V", "NM-HD-2VE", "NM-HDA", "NM-HDV", "NM-HDV2-0PORT", "NM-HDV2-1PORT-E1", "NM-HDV2-1PORT-T1", "NM-HDV2-2PORT-E1", "NM-HDV2-2PORT-T1", "NONE", "PA-MCX", "PA-VXA", "PA-VXB", "PA-VXC", "SM-X-NIM-ADPTR", "VG-1NIM-MBRD", "VG-2VWIC-MBRD", "VG-3VWIC-MBRD", "VGC_PORT", "VIC-SLOT", "VWIC-SLOT", "WS-X6600"]

Subunits

Field Name: subunits
Type: ["Object", "Null"]
Cardinality: [0..1]

Subunit

Field Name: subunit.[n]
Type: Array
Cardinality: [1..n]

Index *

Field Name: units.unit.[n].subunits.subunit.[n].index
Type: ["Integer", "Null"]
Cardinality: [1..1]

Product *

Field Name: units.unit.[n].subunits.subunit.[n].product
Type: ["String", "Null"]
Cardinality: [1..1]
Choices: ["16FXS", "16FXS8FXO", "1T1", "24FXS", "24FXS-SCCP", "2FXS-MGCP", "2FXS-SCCP", "48_PORTS", "4FXS-MGCP", "4FXS-SCCP", "8FXS", "EM-4BRI-NT/TE", "EM-4BRI-NT/TE-EM0", "EM-4BRI-NT/TE-EM1", "EM-4BRI-NT/TE-SCCP", "EM-4FXO-EM0", "EM-4FXO-EM1", "EM-8FXS-EM0", "EM-8FXS-EM0-SCCP", "EM-8FXS-EM1", "EM-8FXS-EM1-SCCP", "EM-HDA-3FXS/4FXO", "EM-HDA-3FXS/4FXO-SCCP", "EM-HDA-6FXO", "EM-HDA-8FXS", "EM-HDA-8FXS-SCCP", "EM2-4FXO-EM0", "EM2-4FXO-EM1", "EM3-HDA-8FXS/DID", "EM3-HDA-8FXS/DID-SCCP", "EVM-HD-8FXS/DID", "EVM-HD-8FXS/DID-SCCP", "HWIC-1CE1T1-PRI-E1", "HWIC-1CE1T1-PRI-T1", "HWIC-2CE1T1-PRI-E1", "HWIC-2CE1T1-PRI-T1", "HWIC-4CE1T1-PRI-E1", "HWIC-4CE1T1-PRI-T1", "Intelbras 80 Port FXS", "NIM-1CE1T1-PRI-E1", "NIM-1CE1T1-PRI-T1", "NIM-1MFT-T1E1-E1", "NIM-1MFT-T1E1-T1", "NIM-2BRI-NT/TE", "NIM-2BRI-NT/TE-SCCP", "NIM-2CE1T1-PRI-E1", "NIM-2CE1T1-PRI-T1", "NIM-2FXO", "NIM-2FXS", "NIM-2FXS-SCCP", "NIM-2FXS/4FXO", "NIM-2FXS/4FXO-SCCP", "NIM-2MFT-T1E1-E1", "NIM-2MFT-T1E1-T1", "NIM-4BRI-NT/TE", "NIM-4BRI-NT/TE-SCCP", "NIM-4FXO", "NIM-4FXS", "NIM-4FXS-SCCP", "NIM-4MFT-T1E1-E1", "NIM-4MFT-T1E1-T1", "NIM-8CE1T1-PRI-E1", "NIM-8CE1T1-PRI-T1", "NIM-8MFT-T1E1-E1", "NIM-8MFT-T1E1-T1", "NM-HDA-4FXS", "NM-HDA-4FXS-SCCP", "NM-HDV2-ONBOARD-E1", "NM-HDV2-ONBOARD-E1-2PORT", "NM-HDV2-ONBOARD-T1", "NM-HDV2-ONBOARD-T1-2PORT", "PA-MCX-2TE1-E1", "PA-MCX-2TE1-T1", "PA-MCX-4TE1-E1", "PA-MCX-4TE1-T1", "PA-MCX-6TE1-E1", "PA-MCX-6TE1-T1", "PA-MCX-8TE1-E1", "PA-MCX-8TE1-T1", "PA-VXA-1TE1-24-T1", "PA-VXA-1TE1-30-E1", "PA-VXB-2TE1-E1", "PA-VXB-2TE1-T1", "PA-VXC-2TE1-E1", "PA-VXC-2TE1-T1", "SM-D-48FXS-E", "SM-D-48FXS-E-SCCP", "SM-D-72FXS", "SM-D-72FXS-SCCP", "SM-X-16FXS/2FXO", "SM-X-16FXS/2FXO-SCCP", "SM-X-24FXS/4FXO", "SM-X-24FXS/4FXO-SCCP", "SM-X-56FXS", "SM-X-56FXS-SCCP", "SM-X-72FXS", "SM-X-72FXS-SCCP", "SM-X-8FXS/12FXO", "SM-X-8FXS/12FXO-SCCP", "VG-2FXS/2FXO", "VG-2FXS/2FXO-SCCP", "VG-4FXS/4FXO", "VG-4FXS/4FXO-SCCP", "VG-6FXS/6FXO", "VG-6FXS/6FXO-SCCP", "VG-8FXS", "VG-8FXS-SCCP", "VGD-DFC-CT3", "VIC-16FXS", "VIC-2BRI", "VIC-2FXO", "VIC-2FXS", "VIC-2FXS-SCCP", "VIC-4FXO", "VIC-4FXS", "VIC-4FXS-SCCP", "VIC-4FXS/DID", "VIC-8FXO", "VIC-8FXS", "VIC2-1BRI", "VIC2-1FXO", "VIC2-1MFT-T1E1-E1", "VIC2-1MFT-T1E1-T1", "VIC2-2BRI", "VIC2-2BRI-NT/TE-SCCP", "VIC2-2FXO", "VIC2-2FXS", "VIC2-2FXS-SCCP", "VIC2-2MFT-T1E1-E1", "VIC2-2MFT-T1E1-T1", "VIC2-4FXO", "VIC3-2FXS-E/DID", "VIC3-2FXS-E/DID-SCCP", "VIC3-2FXS/DID", "VIC3-2FXS/DID-SCCP", "VIC3-4FXS/DID", "VIC3-4FXS/DID-SCCP", "VIC_NONE", "VWIC-1MFT-E1", "VWIC-1MFT-T1", "VWIC-2MFT-E1", "VWIC-2MFT-T1", "VWIC2-1MFT-G703-E1", "VWIC2-1MFT-G703-T1", "VWIC2-1MFT-T1E1-E1", "VWIC2-1MFT-T1E1-T1", "VWIC2-2MFT-G703-E1", "VWIC2-2MFT-G703-T1", "VWIC2-2MFT-T1E1-E1", "VWIC2-2MFT-T1E1-T1", "VWIC3-1MFT-G703-E1", "VWIC3-1MFT-G703-T1", "VWIC3-1MFT-T1E1-E1", "VWIC3-1MFT-T1E1-T1", "VWIC3-2MFT-G703-E1", "VWIC3-2MFT-G703-T1", "VWIC3-2MFT-T1E1-E1", "VWIC3-2MFT-T1E1-T1", "VWIC3-4MFT-T1E1-E1", "VWIC3-4MFT-T1E1-T1", "WS-SVC-CMM-MS", "WS-U4604-16FXS", "WS-U4604-8FXO-2FXS", "WS-U4604-8FXS", "WS-X6600-24FXS", "WS-X6600-6E1", "WS-X6600-6T1"]

Begin Port

Field Name: units.unit.[n].subunits.subunit.[n].beginPort
Type: ["Integer", "Null"]
Cardinality: [0..1]

Endpoints

Field Name: Endpoints.[n]
Type: Array

Subunit *

Field Name: Endpoints.[n].subunit
Type: ["Integer", "Null"]
Cardinality: [1..1]

Endpoint

Field Name: endpoint
Type: ["Object", "Null"]
Cardinality: [1..1]

Protocol *

Protocol option is read-only,except when creating a device.

Field Name: Endpoints.[n].endpoint.protocol
Type: String
Cardinality: [1..1]
Choices: ["SCCP", "Digital Access PRI", "H.225", "Analog Access", "Digital Access T1", "Route Point", "Unicast Bridge", "Multicast Point", "Inter-Cluster Trunk", "RAS", "Digital Access BRI", "SIP", "MGCP", "Static SIP Mobile Subscriber", "SIP Connector", "Remote Destination", "Mobile Smart Client", "Digital Access E1 R2", "CTI Remote Device", "Protocol Not Specified"]

Geo Location Filter Name

Field Name: Endpoints.[n].endpoint.geoLocationFilterName
Type: ["String", "Null"]
Target: device/cucm/GeoLocationFilter
Target attr: name
Cardinality: [0..1]
Format: uri

Calling Party Strip Digits

Field Name: Endpoints.[n].endpoint.callingPartyStripDigits
Type: ["Integer", "Null"]
Cardinality: [0..1]

Vendor Config

Field Name: vendorConfig.[n]
Type: Array

Value

Field Name: Endpoints.[n].endpoint.vendorConfig.[n].value
Type: Any

Key

Field Name: Endpoints.[n].endpoint.vendorConfig.[n].key
Type: String

Always Use Prime Line *

Default: Default

Field Name: Endpoints.[n].endpoint.alwaysUsePrimeLine
Type: String
Cardinality: [1..1]
Default: Default
Choices: ["Off", "On", "Default"]

Calling Party Unknown Transformation Css Name

Field Name: Endpoints.[n].endpoint.callingPartyUnknownTransformationCssName
Type: ["String", "Null"]
Target: device/cucm/Css
Target attr: name
Cardinality: [0..1]
Format: uri

Phone Template Name *

Field Name: Endpoints.[n].endpoint.phoneTemplateName
Type: String
Target: device/cucm/PhoneButtonTemplate
Target attr: name
Cardinality: [1..1]
Format: uri

Calling Search Space Name

Field Name: Endpoints.[n].endpoint.callingSearchSpaceName
Type: ["String", "Null"]
Target: device/cucm/Css
Target attr: name
Cardinality: [0..1]
Format: uri

Index *

Field Name: Endpoints.[n].endpoint.index
Type: Integer
Cardinality: [1..1]

Allow Cti Control Flag

Applicable only for SCCP

Field Name: Endpoints.[n].endpoint.allowCtiControlFlag
Type: Boolean
Cardinality: [0..1]

Packet Capture Duration

Field Name: Endpoints.[n].endpoint.packetCaptureDuration
Type: ["Integer", "Null"]
Cardinality: [0..1]

Use Trusted Relay Point *

Default: Default

Field Name: Endpoints.[n].endpoint.useTrustedRelayPoint
Type: String
Cardinality: [1..1]
Default: Default
Choices: ["Off", "On", "Default"]

Pstn Access

Default: True

Field Name: Endpoints.[n].endpoint.pstnAccess
Type: Boolean
Cardinality: [0..1]
Default: True

Common Device Config Name

Field Name: Endpoints.[n].endpoint.commonDeviceConfigName
Type: ["String", "Null"]
Target: device/cucm/CommonDeviceConfig
Target attr: name
Cardinality: [0..1]
Format: uri

Network Locale

Field Name: Endpoints.[n].endpoint.networkLocale
Type: ["String", "Null"]
Target: device/cucm/Country
Target attr: name
Cardinality: [0..1]
Format: uri
Choices: ["Argentina", "Australia", "Austria", "Belgium", "Brazil", "Canada", "China", "Colombia", "Cyprus", "Czech Republic", "Denmark", "Egypt", "Finland", "France", "Germany", "Ghana", "Greece", "Hong Kong", "Hungary", "Iceland", "India", "Indonesia", "Ireland", "Israel", "Italy", "Japan", "Jordan", "Kenya", "Korea Republic", "Lebanon", "Luxembourg", "Malaysia", "Mexico", "Nepal", "Netherlands", "New Zealand", "Nigeria", "Norway", "Pakistan", "Panama", "Peru", "Philippines", "Poland", "Portugal", "Russian Federation", "Saudi Arabia", "Singapore", "Slovakia", "Slovenia", "South Africa", "Spain", "Sweden", "Switzerland", "Taiwan", "Thailand", "Turkey", "United Kingdom", "United States", "Venezuela", "Zimbabwe", "Itu", "Chile", "Bulgaria", "Croatia", "Romania", "Serbia and Montenegro", "United Arab Emirates", "Oman", "Kuwait", "Algeria", "Bahrain", "Iraq", "Mauritania", "Republic of Montenegro", "Morocco", "Qatar", "Republic of Serbia", "Sudan", "Tunisia", "Vietnam", "Yemen", "Lithuania", "Latvia", "Estonia", "Ukraine"]

Mlpp Indication Status

This setting only affects devices that support MLPP. Default: Off

Field Name: Endpoints.[n].endpoint.mlppIndicationStatus
Type: String
Cardinality: [0..1]
Default: Off
Choices: ["Off", "On", "Default"]

Owner User Id

Applicable only for SCCP

Field Name: Endpoints.[n].endpoint.ownerUserId
Type: ["String", "Null"]
Target: device/cucm/User
Target attr: userid
Cardinality: [0..1]
Format: uri

Cgpn Transformation Css Name

Field Name: Endpoints.[n].endpoint.cgpnTransformationCssName
Type: ["String", "Null"]
Target: device/cucm/Css
Target attr: name
Cardinality: [0..1]
Format: uri

Packet Capture Mode

Default: None

Field Name: Endpoints.[n].endpoint.packetCaptureMode
Type: String
Cardinality: [0..1]
Default: None
Choices: ["None", "Batch Processing Mode"]

Unattended Port

Applicable only for SCCP

Field Name: Endpoints.[n].endpoint.unattendedPort
Type: ["Boolean", "Null"]
Cardinality: [0..1]

Use Device Pool Cgpn Transform Css

Default: True

Field Name: Endpoints.[n].endpoint.useDevicePoolCgpnTransformCss
Type: Boolean
Cardinality: [0..1]
Default: True

Product *

Product ID string. read-only except when creating a device.

Field Name: Endpoints.[n].endpoint.product
Type: String
Cardinality: [1..1]
Choices: ["7914 14-Button Line Expansion Module", "7915 12-Button Line Expansion Module", "7915 24-Button Line Expansion Module", "7916 12-Button Line Expansion Module", "7916 24-Button Line Expansion Module", "AIM-VOICE-30", "Analog Phone", "Annunciator", "BEKEM 36-Button Line Expansion Module", "C881V", "C887VA-V", "CKEM 36-Button Line Expansion Module", "CP-8800-Audio 28-Button Key Expansion Module", "CP-8800-Video 28-Button Key Expansion Module", "CTI Port", "CTI Remote Device", "CTI Route Point", "Carrier-integrated Mobile", "Cisco IAD2400", "Cisco 12 S", "Cisco 12 SP", "Cisco 12 SP+", "Cisco 1751", "Cisco 1760", "Cisco 1861", "Cisco 269X", "Cisco 26XX", "Cisco 2801", "Cisco 2811", "Cisco 2821", "Cisco 2851", "Cisco 2901", "Cisco 2911", "Cisco 2921", "Cisco 2951", "Cisco 30 SP+", "Cisco 30 VIP", "Cisco 362X", "Cisco 364X", "Cisco 366X", "Cisco 3725", "Cisco 3745", "Cisco 3825", "Cisco 3845", "Cisco 3905", "Cisco 3911", "Cisco 3925", "Cisco 3925E", "Cisco 3945", "Cisco 3945E", "Cisco 3951", "Cisco 6901", "Cisco 6911", "Cisco 6921", "Cisco 6941", "Cisco 6945", "Cisco 6961", "Cisco 7811", "Cisco 7821", "Cisco 7832", "Cisco 7841", "Cisco 7861", "Cisco 7902", "Cisco 7905", "Cisco 7906", "Cisco 7910", "Cisco 7911", "Cisco 7912", "Cisco 7920", "Cisco 7921", "Cisco 7925", "Cisco 7926", "Cisco 7931", "Cisco 7935", "Cisco 7936", "Cisco 7937", "Cisco 7940", "Cisco 7941", "Cisco 7941G-GE", "Cisco 7942", "Cisco 7945", "Cisco 7960", "Cisco 7961", "Cisco 7961G-GE", "Cisco 7962", "Cisco 7965", "Cisco 7970", "Cisco 7971", "Cisco 7975", "Cisco 7985", "Cisco 881", "Cisco 8811", "Cisco 8821", "Cisco 8831", "Cisco 8832", "Cisco 8832NR", "Cisco 8841", "Cisco 8845", "Cisco 8851", "Cisco 8851NR", "Cisco 8861", "Cisco 8865", "Cisco 8865NR", "Cisco 888/887/886", "Cisco 8941", "Cisco 8945", "Cisco 8961", "Cisco 9951", "Cisco 9971", "Cisco ATA 186", "Cisco ATA 187", "Cisco ATA 190", "Cisco ATA 191", "Cisco Catalyst 4000 Access Gateway Module", "Cisco Catalyst 4224 Voice Gateway Switch", "Cisco Catalyst 6000 12 port FXO Gateway", "Cisco Catalyst 6000 24 port FXS Gateway", "Cisco Catalyst 6000 E1 VoIP Gateway", "Cisco Catalyst 6000 T1 VoIP Gateway", "Cisco Cius", "Cisco Cius SP", "Cisco Collaboration Mobile Convergence", "Cisco Conference Bridge (WS-SVC-CMM)", "Cisco Conference Bridge Hardware", "Cisco Conference Bridge Software", "Cisco DX650", "Cisco DX70", "Cisco DX80", "Cisco Dual Mode for Android", "Cisco Dual Mode for iPhone", "Cisco E20", "Cisco ENCS 5400 ISRV", "Cisco IOS Conference Bridge", "Cisco IOS Enhanced Conference Bridge", "Cisco IOS Enhanced Media Termination Point", "Cisco IOS Enhanced Software Media Termination Point", "Cisco IOS Guaranteed Audio Video Conference Bridge", "Cisco IOS Heterogeneous Video Conference Bridge", "Cisco IOS Homogeneous Video Conference Bridge", "Cisco IOS Media Termination Point", "Cisco IP Communicator", "Cisco ISR 4321", "Cisco ISR 4331", "Cisco ISR 4351", "Cisco ISR 4431", "Cisco ISR 4451", "Cisco ISR 4461", "Cisco Jabber for Tablet", "Cisco MGCP BRI Port", "Cisco MGCP E1 Port", "Cisco MGCP FXO Port", "Cisco MGCP FXS Port", "Cisco MGCP T1 Port", "Cisco Media Server (WS-SVC-CMM-MS)", "Cisco Media Termination Point (WS-SVC-CMM)", "Cisco Media Termination Point Hardware", "Cisco Media Termination Point Software", "Cisco Meeting Server", "Cisco Spark Remote Device", "Cisco TelePresence", "Cisco TelePresence 1000", "Cisco TelePresence 1100", "Cisco TelePresence 1300-47", "Cisco TelePresence 1300-65", "Cisco TelePresence 200", "Cisco TelePresence 3000", "Cisco TelePresence 3200", "Cisco TelePresence 400", "Cisco TelePresence 500-32", "Cisco TelePresence 500-37", "Cisco TelePresence Codec C40", "Cisco TelePresence Codec C60", "Cisco TelePresence Codec C90", "Cisco TelePresence Conductor", "Cisco TelePresence DX70", "Cisco TelePresence EX60", "Cisco TelePresence EX90", "Cisco TelePresence Exchange System", "Cisco TelePresence IX5000", "Cisco TelePresence MCU", "Cisco TelePresence MX200", "Cisco TelePresence MX200 G2", "Cisco TelePresence MX300", "Cisco TelePresence MX300 G2", "Cisco TelePresence MX700", "Cisco TelePresence MX800", "Cisco TelePresence MX800 Dual", "Cisco TelePresence Profile 42 (C20)", "Cisco TelePresence Profile 42 (C40)", "Cisco TelePresence Profile 42 (C60)", "Cisco TelePresence Profile 52 (C40)", "Cisco TelePresence Profile 52 (C60)", "Cisco TelePresence Profile 52 Dual (C60)", "Cisco TelePresence Profile 65 (C60)", "Cisco TelePresence Profile 65 Dual (C90)", "Cisco TelePresence Quick Set C20", "Cisco TelePresence SX10", "Cisco TelePresence SX20", "Cisco TelePresence SX80", "Cisco TelePresence TX1310-65", "Cisco TelePresence TX9000", "Cisco TelePresence TX9200", "Cisco Unified Client Services Framework", "Cisco Unified Communications for RTX", "Cisco Unified Mobile Communicator", "Cisco Unified Personal Communicator", "Cisco VG200", "Cisco VG248 Gateway", "Cisco VGC Phone", "Cisco VGC Virtual Phone", "Cisco VGD-1T3", "Cisco VXC 6215", "Cisco Video Conference Bridge(IPVC-35xx)", "Cisco Voice Mail Port", "Cisco Webex DX80", "Cisco Webex Room 55", "Cisco Webex Room 55 Dual", "Cisco Webex Room 70 Dual", "Cisco Webex Room 70 Dual G2", "Cisco Webex Room 70 Single", "Cisco Webex Room 70 Single G2", "Cisco Webex Room Kit", "Cisco Webex Room Kit Mini", "Cisco Webex Room Kit Plus", "Communication Media Module", "EMCC Base Phone", "FLEX_SLOT", "Gatekeeper", "Generic Desktop Video Endpoint", "Generic Multiple Screen Room System", "Generic Single Screen Room System", "H.225 Trunk (Gatekeeper Controlled)", "H.323 Client", "H.323 Gateway", "Hunt List", "IAD2400_ANALOG", "IAD2400_DIGITAL", "IMS-integrated Mobile (Basic)", "IP-STE", "ISDN BRI Phone", "Inter-Cluster Trunk (Gatekeeper Controlled)", "Inter-Cluster Trunk (Non-Gatekeeper Controlled)", "Interactive Voice Response", "Load Simulator", "Motorola CN622", "Music On Hold", "NM-1V", "NM-2V", "NM-4VWIC-MBRD", "NM-HD-1V", "NM-HD-2V", "NM-HD-2VE", "NM-HDA", "NM-HDV", "NM-HDV2-0PORT", "NM-HDV2-1PORT", "NM-HDV2-2PORT", "Nokia S60", "PA-MCX", "PA-VXA", "PA-VXB", "PA-VXC", "Pilot", "Remote Destination Profile", "Route List", "SCCP Device", "SCCP gateway virtual phone", "SIP Trunk", "SIP WSM Connection", "SPA8800", "Third-party AS-SIP Endpoint", "Third-party SIP Device (Advanced)", "Third-party SIP Device (Basic)", "Transnova S3", "Universal Device Template", "Unknown", "VG202", "VG204", "VG224", "VG310", "VG320", "VG350", "VG400", "VG450", "VGC Port", "VIC_SLOT", "VKEM 36-Button Line Expansion Module", "VNM-HDA", "VWIC_SLOT", "WS-SVC-CMM-MS", "WS-X6600"]

Calling Party Number Prefix

Field Name: Endpoints.[n].endpoint.callingPartyNumberPrefix
Type: String
Cardinality: [0..1]
MaxLength: 16

Always Use Prime Line For VM *

Default: Default

Field Name: Endpoints.[n].endpoint.alwaysUsePrimeLineForVM
Type: String
Cardinality: [1..1]
Default: Default
Choices: ["Off", "On", "Default"]

Description

Optional description of the device

Field Name: Endpoints.[n].endpoint.description
Type: String
Cardinality: [0..1]
MaxLength: 128

Use Device Pool Cgpn Transform Css Unknown

Default: True

Field Name: Endpoints.[n].endpoint.useDevicePoolCgpnTransformCssUnknown
Type: Boolean
Cardinality: [0..1]
Default: True

Ignore Presentation Indicators

Applicable only for SCCP

Field Name: Endpoints.[n].endpoint.ignorePresentationIndicators
Type: Boolean

Subscribe Calling Search Space Name

Applicable only for SCCP

Field Name: Endpoints.[n].endpoint.subscribeCallingSearchSpaceName
Type: String
Target: device/cucm/Css
Target attr: name
Cardinality: [1..1]
Format: uri

User Locale

Field Name: Endpoints.[n].endpoint.userLocale
Type: ["String", "Null"]
Target: device/cucm/UserLocale
Target attr: name
Cardinality: [0..1]
Format: uri
Choices: ["English United States"]

Use Device Pool Cdpn Transform Css

Default: True

Field Name: Endpoints.[n].endpoint.useDevicePoolCdpnTransformCss
Type: Boolean
Cardinality: [0..1]
Default: True

Geo Location Name

Field Name: Endpoints.[n].endpoint.geoLocationName
Type: ["String", "Null"]
Target: device/cucm/GeoLocation
Target attr: name
Cardinality: [0..1]
Format: uri

Device Mobility Mode *

Default: Default

Field Name: Endpoints.[n].endpoint.deviceMobilityMode
Type: String
Cardinality: [1..1]
Default: Default
Choices: ["Off", "On", "Default"]

Preemption

This setting only affects devices that support MLPP. Default: Default

Field Name: Endpoints.[n].endpoint.preemption
Type: String
Cardinality: [0..1]
Default: Default
Choices: ["Disabled", "Forceful", "Default"]

Hlog Status

Applicable only for SCCP

Field Name: Endpoints.[n].endpoint.hlogStatus
Type: Boolean
Cardinality: [0..1]

Media Resource List Name

Field Name: Endpoints.[n].endpoint.mediaResourceListName
Type: ["String", "Null"]
Target: device/cucm/MediaResourceList
Target attr: name
Cardinality: [0..1]
Format: uri

Cdpn Transformation Css Name

Field Name: Endpoints.[n].endpoint.cdpnTransformationCssName
Type: ["String", "Null"]
Target: device/cucm/Css
Target attr: name
Cardinality: [0..1]
Format: uri

Class *

Class ID string. Class information is read-only except when creating a device.

Field Name: Endpoints.[n].endpoint.class
Type: String
Cardinality: [1..1]
Choices: ["Phone", "Gateway", "Conference Bridge", "Media Termination Point", "Route List", "Voice Mail", "CTI Route Point", "Music On Hold", "Simulation", "Pilot", "GateKeeper", "Add-on modules", "Hidden Phone", "Trunk", "Tone Announcement Player", "Remote Destination Profile", "EMCC Base Phone Template", "EMCC Base Phone", "Remote Destination Profile Template", "Gateway Template", "UDP Template", "Phone Template", "Device Profile", "Invalid", "Interactive Voice Response"]

Hotline Device

This tag is applicable for MGCP FXS ports,which supports PLAR.

Field Name: Endpoints.[n].endpoint.hotlineDevice
Type: Boolean
Cardinality: [0..1]

Security Profile Name *

Field Name: Endpoints.[n].endpoint.securityProfileName
Type: String
Target: device/cucm/PhoneSecurityProfile
Target attr: name
Cardinality: [1..1]
Format: uri

Presence Group Name *

Applicable only for SCCP

Field Name: Endpoints.[n].endpoint.presenceGroupName
Type: String
Target: device/cucm/PresenceGroup
Target attr: name
Cardinality: [1..1]
Format: uri

Name *

The device name,using only URL-friendly characters

Field Name: Endpoints.[n].endpoint.name
Type: String
Cardinality: [1..1]
MaxLength: 128

Retry Video Call As Audio

Default: True

Field Name: Endpoints.[n].endpoint.retryVideoCallAsAudio
Type: Boolean
Cardinality: [0..1]
Default: True

Protocol Side *

Side information is read-only except when creating a device Default: User

Field Name: Endpoints.[n].endpoint.protocolSide
Type: String
Cardinality: [1..1]
Default: User
Choices: ["Network", "User"]

Common Phone Config Name *

Field Name: Endpoints.[n].endpoint.commonPhoneConfigName
Type: String
Target: device/cucm/CommonPhoneConfig
Target attr: name
Cardinality: [1..1]
Format: uri

Mlpp Domain Id

This setting only effects devices that support MLPP. Use -1 to set to null

Field Name: Endpoints.[n].endpoint.mlppDomainId
Type: ["String", "Null"]
Cardinality: [0..1]
MaxLength: 128

Aar Neighborhood Name

Field Name: Endpoints.[n].endpoint.aarNeighborhoodName
Type: ["String", "Null"]
Target: device/cucm/AarGroup
Target attr: name
Cardinality: [0..1]
Format: uri

Location Name *

Field Name: Endpoints.[n].endpoint.locationName
Type: String
Target: device/cucm/Location
Target attr: name
Cardinality: [1..1]
Format: uri

Transmit Utf8

Field Name: Endpoints.[n].endpoint.transmitUtf8
Type: Boolean
Cardinality: [0..1]

Remote Device

Applicable only for SCCP

Field Name: Endpoints.[n].endpoint.remoteDevice
Type: Boolean
Cardinality: [0..1]

Automated Alternate Routing Css Name

Field Name: Endpoints.[n].endpoint.automatedAlternateRoutingCssName
Type: ["String", "Null"]
Target: device/cucm/Css
Target attr: name
Cardinality: [0..1]
Format: uri

Device Pool Name *

Field Name: Endpoints.[n].endpoint.devicePoolName
Type: String
Target: device/cucm/DevicePool
Target attr: name
Cardinality: [1..1]
Format: uri

Model

Model ID string. Read Only

Field Name: Endpoints.[n].endpoint.model
Type: String
Cardinality: [0..1]
Choices: ["Cisco 30 SP+", "Cisco 12 SP+", "Cisco 12 SP", "Cisco 12 S", "Cisco 30 VIP", "Cisco 7910", "Cisco 7960", "Cisco 7940", "Cisco 7935", "Cisco VGC Phone", "Cisco VGC Virtual Phone", "Cisco ATA 186", "EMCC Base Phone", "SCCP Phone", "Analog Access", "Digital Access", "Digital Access+", "Digital Access WS-X6608", "Analog Access WS-X6624", "VGC Gateway", "Conference Bridge", "Conference Bridge WS-X6608", "Cisco IOS Conference Bridge (HDV2)", "Cisco Conference Bridge (WS-SVC-CMM)", "H.323 Phone", "H.323 Gateway", "Music On Hold", "Device Pilot", "CTI Port", "CTI Route Point", "Voice Mail Port", "Cisco IOS Software Media Termination Point (HDV2)", "Cisco Media Server (WS-SVC-CMM-MS)", "Cisco Video Conference Bridge (IPVC-35xx)", "Cisco IOS Heterogeneous Video Conference Bridge", "Cisco IOS Guaranteed Audio Video Conference Bridge", "Cisco IOS Homogeneous Video Conference Bridge", "Route List", "Load Simulator", "Media Termination Point", "Media Termination Point Hardware", "Cisco IOS Media Termination Point (HDV2)", "Cisco Media Termination Point (WS-SVC-CMM)", "Cisco 7941", "Cisco 7971", "MGCP Station", "MGCP Trunk", "GateKeeper", "7914 14-Button Line Expansion Module", "Trunk", "Tone Announcement Player", "SIP Trunk", "SIP Gateway", "WSM Trunk", "Remote Destination Profile", "7915 12-Button Line Expansion Module", "7915 24-Button Line Expansion Module", "7916 12-Button Line Expansion Module", "7916 24-Button Line Expansion Module", "CKEM 36-Button Line Expansion Module", "SPA8800", "Unknown MGCP Gateway", "Unknown", "Cisco 7985", "Cisco 7911", "Cisco 7961G-GE", "Cisco 7941G-GE", "Motorola CN622", "Third-party SIP Device (Basic)", "Cisco 7931", "Cisco Unified Personal Communicator", "Cisco 7921", "Cisco 7906", "Third-party SIP Device (Advanced)", "Cisco TelePresence", "Nokia S60", "Cisco 7962", "Cisco 3951", "Cisco 7937", "Cisco 7942", "Cisco 7945", "Cisco 7965", "Cisco 7975", "Cisco 3911", "Cisco Unified Mobile Communicator", "Cisco TelePresence 1000", "Cisco TelePresence 3000", "Cisco TelePresence 3200", "Cisco TelePresence 500-37", "Cisco 7925", "Cisco 9971", "Cisco 6921", "Cisco 6941", "Cisco 6961", "Cisco Unified Client Services Framework", "Cisco TelePresence 1300-65", "Cisco TelePresence 1100", "Transnova S3", "BlackBerry MVS VoWifi", "Cisco 9951", "Cisco 8961", "Cisco 6901", "Cisco 6911", "Cisco ATA 187", "Cisco TelePresence 200", "Cisco TelePresence 400", "Cisco Dual Mode for iPhone", "Cisco 6945", "Cisco Dual Mode for Android", "Cisco 7926", "Cisco E20", "Generic Single Screen Room System", "Generic Multiple Screen Room System", "Cisco TelePresence EX90", "Cisco 8945", "Cisco 8941", "Generic Desktop Video Endpoint", "Cisco TelePresence 500-32", "Cisco TelePresence 1300-47", "Cisco 3905", "Cisco Cius", "VKEM 36-Button Line Expansion Module", "Cisco TelePresence TX1310-65", "Cisco TelePresence MCU", "Ascom IP-DECT Device", "Cisco TelePresence Exchange System", "Cisco TelePresence EX60", "Cisco TelePresence Codec C90", "Cisco TelePresence Codec C60", "Cisco TelePresence Codec C40", "Cisco TelePresence Quick Set C20", "Cisco TelePresence Profile 42 (C20)", "Cisco TelePresence Profile 42 (C60)", "Cisco TelePresence Profile 52 (C40)", "Cisco TelePresence Profile 52 (C60)", "Cisco TelePresence Profile 52 Dual (C60)", "Cisco TelePresence Profile 65 (C60)", "Cisco TelePresence Profile 65 Dual (C90)", "Cisco TelePresence MX200", "Cisco TelePresence TX9000", "Cisco TelePresence TX9200", "Cisco 7821", "Cisco 7841", "Cisco 7861", "Cisco TelePresence SX20", "Cisco TelePresence MX300", "IMS-integrated Mobile (Basic)", "Third-party AS-SIP Endpoint", "Cisco Cius SP", "Cisco TelePresence Profile 42 (C40)", "Cisco VXC 6215", "CTI Remote Device", "Usage Profile", "Carrier-integrated Mobile", "Universal Device Template", "Cisco DX650", "Cisco Unified Communications for RTX", "Cisco Jabber for Tablet", "Cisco 8831", "Cisco ATA 190", "Cisco TelePresence SX10", "Cisco 8841", "Cisco 8851", "Cisco 8861", "Cisco TelePresence SX80", "Cisco TelePresence MX200 G2", "Cisco TelePresence MX300 G2", "Cisco 7905", "Cisco 7920", "Cisco 7970", "Cisco 7912", "Cisco 7902", "Cisco IP Communicator", "Cisco 7961", "Cisco 7936", "Analog Phone", "ISDN BRI Phone", "SCCP gateway virtual phone", "IP-STE", "Cisco TelePresence Conductor", "Cisco DX80", "Cisco DX70", "BEKEM 36-Button Line Expansion Module", "Cisco TelePresence MX700", "Cisco TelePresence MX800", "Cisco TelePresence IX5000", "Cisco 7811", "Cisco 8821", "Cisco 8811", "Interactive Voice Response", "Cisco 8845", "Cisco 8865", "Cisco TelePresence MX800 Dual", "Cisco 8851NR", "Cisco Spark Remote Device", "Cisco Webex DX80", "Cisco TelePresence DX70", "Cisco 7832", "Cisco 8865NR", "Cisco Meeting Server", "Cisco Webex Room Kit", "Cisco Webex Room 55", "Cisco Webex Room Kit Plus", "CP-8800-Video 28-Button Key Expansion Module", "CP-8800-Audio 28-Button Key Expansion Module", "Cisco 8832", "Cisco Webex Room 70 Single", "Cisco 8832NR", "Cisco ATA 191", "Cisco Collaboration Mobile Convergence", "Cisco Webex Room 70 Dual", "Cisco Webex Room 55 Dual", "Cisco Webex Room 70 Single G2", "Cisco Webex Room 70 Dual G2", "Cisco Webex Room Kit Mini"]

Ime E164Transformation Name

Field Name: Endpoints.[n].endpoint.imeE164TransformationName
Type: ["String", "Null"]
Target: device/cucm/ImeE164Transformation
Target attr: name
Cardinality: [0..1]
Format: uri

Lines

Field Name: lines
Type: Object
Cardinality: [0..1]

Line

An XLine is an entry in the DeviceNumPlanMap table. The actual directory number is referenced inside the XLine object by the "dirn" or "dirnId" element. Not applicable to FXO ports

Field Name: line.[n]
Type: Array
Cardinality: [0..1]

Display Ascii

Field Name: Endpoints.[n].endpoint.lines.line.[n].displayAscii
Type: String
Cardinality: [0..1]
MaxLength: 50

Associated Endusers

Field Name: associatedEndusers
Type: ["Object", "Null"]
Cardinality: [0..1]

Enduser

Field Name: enduser.[n]
Type: Array

User Id *

Field Name: Endpoints.[n].endpoint.lines.line.[n].associatedEndusers.enduser.[n].userId
Type: ["String", "Null"]
Target: device/cucm/User
Target attr: userid
Cardinality: [1..1]
Format: uri

Ring Setting

Default: Ring

Field Name: Endpoints.[n].endpoint.lines.line.[n].ringSetting
Type: String
Cardinality: [0..1]
Default: Ring
Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]

Consecutive Ring Setting

Consecutive Rings Setting. Replaces the consective ring setting on IPPhone. Default: Use System Default

Field Name: Endpoints.[n].endpoint.lines.line.[n].consecutiveRingSetting
Type: ["String", "Null"]
Cardinality: [0..1]
Default: Use System Default
Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]

Recording Profile Name

Field Name: Endpoints.[n].endpoint.lines.line.[n].recordingProfileName
Type: ["String", "Null"]
Cardinality: [0..1]

Index

Field Name: Endpoints.[n].endpoint.lines.line.[n].index
Type: Integer
Cardinality: [1..1]

Ring Setting Active Pickup Alert

Applicable only for IP Phones Default: Use System Default

Field Name: Endpoints.[n].endpoint.lines.line.[n].ringSettingActivePickupAlert
Type: ["String", "Null"]
Cardinality: [0..1]
Default: Use System Default
Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]

Label

Field Name: Endpoints.[n].endpoint.lines.line.[n].label
Type: String
Cardinality: [0..1]
MaxLength: 50

Recording Media Source

Default: Gateway Preferred

Field Name: Endpoints.[n].endpoint.lines.line.[n].recordingMediaSource
Type: String
Cardinality: [0..1]
Default: Gateway Preferred
Choices: ["Gateway Preferred", "Phone Preferred"]

Max Num Calls

Default: 2

Field Name: Endpoints.[n].endpoint.lines.line.[n].maxNumCalls
Type: Integer
Cardinality: [0..1]
Default: 2

Partition Usage

This tag cannot be modified. It can only be specified in the add request. Default: General

Field Name: Endpoints.[n].endpoint.lines.line.[n].partitionUsage
Type: String
Cardinality: [0..1]
Default: General
Choices: ["Intercom", "Call Control Discovery Learned Pattern", "General", "Directory URI"]

Recording Flag

Default: Call Recording Disabled

Field Name: Endpoints.[n].endpoint.lines.line.[n].recordingFlag
Type: String
Cardinality: [0..1]
Default: Call Recording Disabled
Choices: ["Call Recording Disabled", "Automatic Call Recording Enabled", "Selective Call Recording Enabled"]

Speed Dial

Field Name: Endpoints.[n].endpoint.lines.line.[n].speedDial
Type: ["String", "Null"]
Cardinality: [0..1]

Monitoring Css Name

Field Name: Endpoints.[n].endpoint.lines.line.[n].monitoringCssName
Type: ["String", "Null"]
Cardinality: [0..1]

E164Mask

Field Name: Endpoints.[n].endpoint.lines.line.[n].e164Mask
Type: ["String", "Null"]
Cardinality: [0..1]
MaxLength: 255

Missed Call Logging

Default: True

Field Name: Endpoints.[n].endpoint.lines.line.[n].missedCallLogging
Type: Boolean
Cardinality: [0..1]
Default: True

Call Info Display

Field Name: callInfoDisplay
Type: ["Object", "Null"]
Cardinality: [0..1]

Dialed Number

Default: True

Field Name: Endpoints.[n].endpoint.lines.line.[n].callInfoDisplay.dialedNumber
Type: Boolean
Cardinality: [0..1]
Default: True

Redirected Number

Field Name: Endpoints.[n].endpoint.lines.line.[n].callInfoDisplay.redirectedNumber
Type: Boolean
Cardinality: [0..1]

Caller Number

Field Name: Endpoints.[n].endpoint.lines.line.[n].callInfoDisplay.callerNumber
Type: Boolean
Cardinality: [0..1]

Caller Name

Default: True

Field Name: Endpoints.[n].endpoint.lines.line.[n].callInfoDisplay.callerName
Type: Boolean
Cardinality: [0..1]
Default: True

Dirn

Only uuid attribute is returned in response

Field Name: dirn
Type: ["Object", "Null"]
Cardinality: [1..1]

Pattern *

Field Name: Endpoints.[n].endpoint.lines.line.[n].dirn.pattern
Type: String
Cardinality: [1..1]

Route Partition Name *

Field Name: Endpoints.[n].endpoint.lines.line.[n].dirn.routePartitionName
Type: ["String", "Null"]
Target: device/cucm/RoutePartition
Target attr: name
Cardinality: [1..1]
Format: uri

Mwl Policy

Default: Use System Policy

Field Name: Endpoints.[n].endpoint.lines.line.[n].mwlPolicy
Type: String
Cardinality: [0..1]
Default: Use System Policy
Choices: ["Use System Policy", "Light and Prompt", "Prompt Only", "Light Only", "None"]

Ring Setting Idle Pickup Alert

Applicable only for IP Phones Default: Use System Default

Field Name: Endpoints.[n].endpoint.lines.line.[n].ringSettingIdlePickupAlert
Type: ["String", "Null"]
Cardinality: [0..1]
Default: Use System Default
Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]

Busy Trigger

Default: 1

Field Name: Endpoints.[n].endpoint.lines.line.[n].busyTrigger
Type: Integer
Cardinality: [0..1]
Default: 1

Audible Mwi

Not applicable for gatewayEndpointAnalogAccess and CiscoCatalyst600024PortFXSGateway Default: Default

Field Name: Endpoints.[n].endpoint.lines.line.[n].audibleMwi
Type: String
Cardinality: [0..1]
Default: Default
Choices: ["Off", "On", "Default"]

Display

Field Name: Endpoints.[n].endpoint.lines.line.[n].display
Type: String
Cardinality: [0..1]
MaxLength: 50

Unit *

Field Name: Endpoints.[n].unit
Type: Integer
Cardinality: [1..1]

Domain Name

Field Name: Endpoints.[n].domainName
Type: String
Cardinality: [0..1]

Gateway Dat

Field Name: GatewayDAT
Type: Object

Domain Name *

Domain Name

Field Name: GatewayDAT.domainName
Type: String
MaxLength: 1024

IOS Device *

IOS Device

Field Name: GatewayDAT.iosDevice
Type: String
Target: data/HcsIOSDeviceDAT
Target attr: name
MaxLength: 512
Format: uri

Product

Field Name: GatewayDAT.product
Type: String
MaxLength: 1024

Protocol

Field Name: GatewayDAT.protocol
Type: String
MaxLength: 1024

CCM Group

Field Name: GatewayDAT.ccmGroup
Type: String
MaxLength: 1024

Description

Field Name: GatewayDAT.description
Type: String
MaxLength: 1024

Enable Command Builder

Generate IOS Commands for this gateway and ports Default: true

Field Name: GatewayDAT.generateIOSCommands
Type: Boolean
Default: true

Gateway Network Interface

Field Name: GatewayDAT.networkInterface
Type: String
MaxLength: 1024
Choices: ["FastEthernet0/0", "FastEthernet0/1", "GigabitEthernet0/0", "GigabitEthernet0/1", "GigabitEthernet0/2"]

Call Disconnect Timeout

Field Name: GatewayDAT.disconnectTimeout
Type: Integer

CP Tone

Field Name: GatewayDAT.cpTone
Type: String
MaxLength: 1024
Choices: ["ar", "au", "at", "be", "br", "ca", "cn", "co", "cz", "dk", "de", "eg", "fi", "fr", "gh", "gb", "gr", "hk", "hu", "is", "in", "id", "ie", "il", "it", "jp", "jo", "ke", "kr", "lb", "lu", "my", "mx", "np", "nl", "nz", "ng", "no", "pk", "pa", "pe", "ph", "pl", "pt", "ru", "sa", "sg", "sk", "si", "za", "es", "se", "ch", "tw", "th", "tr", "us", "ve", "zw"]

Signal

Field Name: GatewayDAT.signal
Type: String
MaxLength: 1024
Choices: ["loop-start", "ground-start"]

M Endpoints

Field Name: mEndpoints.[n]
Type: Array

Subunit *

Field Name: mEndpoints.[n].subunit
Type: ["Integer", "Null"]
Cardinality: [1..1]

Endpoint

Field Name: endpoint
Type: ["Object", "Null"]
Cardinality: [1..1]

Protocol *

Protocol option is read-only,except when creating a device.

Field Name: mEndpoints.[n].endpoint.protocol
Type: String
Cardinality: [1..1]
Choices: ["SCCP", "Digital Access PRI", "H.225", "Analog Access", "Digital Access T1", "Route Point", "Unicast Bridge", "Multicast Point", "Inter-Cluster Trunk", "RAS", "Digital Access BRI", "SIP", "MGCP", "Static SIP Mobile Subscriber", "SIP Connector", "Remote Destination", "Mobile Smart Client", "Digital Access E1 R2", "CTI Remote Device", "Protocol Not Specified"]

Geo Location Filter Name

Field Name: mEndpoints.[n].endpoint.geoLocationFilterName
Type: ["String", "Null"]
Cardinality: [0..1]

Calling Party Strip Digits

Field Name: mEndpoints.[n].endpoint.callingPartyStripDigits
Type: ["Integer", "Null"]
Cardinality: [0..1]

Vendor Config

Field Name: vendorConfig.[n]
Type: Array

Value

Field Name: mEndpoints.[n].endpoint.vendorConfig.[n].value
Type: Any

Key

Field Name: mEndpoints.[n].endpoint.vendorConfig.[n].key
Type: String

Calling Party Unknown Transformation Css Name

Field Name: mEndpoints.[n].endpoint.callingPartyUnknownTransformationCssName
Type: ["String", "Null"]
Cardinality: [0..1]

Calling Search Space Name

Field Name: mEndpoints.[n].endpoint.callingSearchSpaceName
Type: ["String", "Null"]
Target: device/cucm/Css
Target attr: name
Cardinality: [0..1]
Format: uri

Index *

Field Name: mEndpoints.[n].endpoint.index
Type: Integer
Cardinality: [1..1]

Packet Capture Duration

Field Name: mEndpoints.[n].endpoint.packetCaptureDuration
Type: ["Integer", "Null"]
Cardinality: [0..1]

Use Trusted Relay Point

Default: Default

Field Name: mEndpoints.[n].endpoint.useTrustedRelayPoint
Type: String
Cardinality: [0..1]
Default: Default
Choices: ["Off", "On", "Default"]

Port

Field Name: port
Type: ["Object", "Null"]
Cardinality: [1..1]

Trunk Level

Field Name: mEndpoints.[n].endpoint.port.trunkLevel
Type: String
Cardinality: [0..1]
Choices: ["AAL(A)", "AAL(D)", "A/TT", "DAL", "ICS", "ISD/TT", "IST", "ONS", "OPS", "S/ATT", "S/DTT", "A/TO"]

Vendor Config

Arbitrary XML defined by 3rd party vendors.

Field Name: vendorConfig.[n]
Type: Array

Value

Field Name: mEndpoints.[n].endpoint.port.vendorConfig.[n].value
Type: Any

Key

Field Name: mEndpoints.[n].endpoint.port.vendorConfig.[n].key
Type: String

Timer4 *

Field Name: mEndpoints.[n].endpoint.port.timer4
Type: Integer
Cardinality: [1..1]

Prefix Dn

Field Name: mEndpoints.[n].endpoint.port.prefixDn
Type: ["String", "Null"]
Cardinality: [0..1]
MaxLength: 255

Start Dial Protocol

Default: Not Set

Field Name: mEndpoints.[n].endpoint.port.startDialProtocol
Type: String
Cardinality: [0..1]
Default: Not Set
Choices: ["Not Set", "Immediate", "Wink Start Feature Group B", "Delay Dial", "Wink Start Feature Group D"]

Port Number *

Field Name: mEndpoints.[n].endpoint.port.portNumber
Type: Integer
Cardinality: [1..1]

Silence Suppression Threshold

Field Name: mEndpoints.[n].endpoint.port.silenceSuppressionThreshold
Type: String
Cardinality: [0..1]
Choices: ["Disable", "-48dbm0", "-45dbm0", "-42dbm0", "-39dbm0", "-36dbm0", "-33dbm0", "-30dbm0"]

Sig Digits *

The value for sigDigits must be between 0 to 32. enable attribute is read only.

Field Name: mEndpoints.[n].endpoint.port.sigDigits
Type: Integer
Cardinality: [1..1]

Caller Id Dn

Field Name: mEndpoints.[n].endpoint.port.callerIdDn
Type: ["String", "Null"]
Cardinality: [0..1]
MaxLength: 255

Timer6 *

Field Name: mEndpoints.[n].endpoint.port.timer6
Type: Integer
Cardinality: [1..1]

Timer5 *

Field Name: mEndpoints.[n].endpoint.port.timer5
Type: Integer
Cardinality: [1..1]

Calling Party Selection

Field Name: mEndpoints.[n].endpoint.port.callingPartySelection
Type: String
Cardinality: [0..1]
Choices: ["Originator", "First Redirect Number", "Last Redirect Number", "First Redirect Number (External)", "Last Redirect Number (External)"]

Timer3 *

Field Name: mEndpoints.[n].endpoint.port.timer3
Type: Integer
Cardinality: [1..1]

Timer2 *

Field Name: mEndpoints.[n].endpoint.port.timer2
Type: Integer
Cardinality: [1..1]

Timer1 *

Field Name: mEndpoints.[n].endpoint.port.timer1
Type: Integer
Cardinality: [1..1]

Expected Digits *

Field Name: mEndpoints.[n].endpoint.port.expectedDigits
Type: Integer
Cardinality: [1..1]

Digit Sending

Default: DTMF

Field Name: mEndpoints.[n].endpoint.port.digitSending
Type: String
Cardinality: [0..1]
Default: DTMF
Choices: ["DTMF", "MF", "PULSE"]

Smdi Port Number *

Not used by T1 Ports

Field Name: mEndpoints.[n].endpoint.port.smdiPortNumber
Type: Integer
Cardinality: [1..1]

Attendant Dn

Mandatory for ground start and loop start

Field Name: mEndpoints.[n].endpoint.port.attendantDn
Type: String
Cardinality: [0..1]
MaxLength: 255

Trunk

Field Name: mEndpoints.[n].endpoint.port.trunk
Type: String
Cardinality: [0..1]
Choices: ["Ground Start", "Loop Start", "DID", "POTS", "EANDM"]

Presentation Bit

Field Name: mEndpoints.[n].endpoint.port.presentationBit
Type: String
Cardinality: [0..1]
Choices: ["Default", "Allowed", "Restricted"]

Lines

Field Name: lines
Type: Object
Cardinality: [0..1]

Line

An XLine is an entry in the DeviceNumPlanMap table. The actual directory number is referenced inside the XLine object by the "dirn" or "dirnId" element. Not applicable to FXO ports

Field Name: line.[n]
Type: Array
Cardinality: [0..1]

Display Ascii

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].displayAscii
Type: String
Cardinality: [0..1]
MaxLength: 50

Associated Endusers

Field Name: associatedEndusers
Type: ["Object", "Null"]
Cardinality: [0..1]

Enduser

Field Name: enduser.[n]
Type: Array

User Id *

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].associatedEndusers.enduser.[n].userId
Type: ["String", "Null"]
Target: device/cucm/User
Target attr: userid
Cardinality: [1..1]
Format: uri

Ring Setting

Default: Ring

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].ringSetting
Type: String
Cardinality: [0..1]
Default: Ring
Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]

Consecutive Ring Setting

Consecutive Rings Setting. Replaces the consective ring setting on IPPhone. Default: Use System Default

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].consecutiveRingSetting
Type: ["String", "Null"]
Cardinality: [0..1]
Default: Use System Default
Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]

Recording Profile Name

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].recordingProfileName
Type: ["String", "Null"]
Cardinality: [0..1]

Index

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].index
Type: Integer
Cardinality: [1..1]

Ring Setting Active Pickup Alert

Applicable only for IP Phones Default: Use System Default

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].ringSettingActivePickupAlert
Type: ["String", "Null"]
Cardinality: [0..1]
Default: Use System Default
Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]

Label

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].label
Type: String
Cardinality: [0..1]
MaxLength: 50

Recording Media Source

Default: Gateway Preferred

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].recordingMediaSource
Type: String
Cardinality: [0..1]
Default: Gateway Preferred
Choices: ["Gateway Preferred", "Phone Preferred"]

Max Num Calls

Default: 2

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].maxNumCalls
Type: Integer
Cardinality: [0..1]
Default: 2

Partition Usage

This tag cannot be modified. It can only be specified in the add request. Default: General

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].partitionUsage
Type: String
Cardinality: [0..1]
Default: General
Choices: ["Intercom", "Call Control Discovery Learned Pattern", "General", "Directory URI"]

Recording Flag

Default: Call Recording Disabled

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].recordingFlag
Type: String
Cardinality: [0..1]
Default: Call Recording Disabled
Choices: ["Call Recording Disabled", "Automatic Call Recording Enabled", "Selective Call Recording Enabled"]

Speed Dial

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].speedDial
Type: ["String", "Null"]
Cardinality: [0..1]

Monitoring Css Name

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].monitoringCssName
Type: ["String", "Null"]
Cardinality: [0..1]

E164Mask

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].e164Mask
Type: ["String", "Null"]
Cardinality: [0..1]
MaxLength: 255

Missed Call Logging

Default: True

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].missedCallLogging
Type: Boolean
Cardinality: [0..1]
Default: True

Call Info Display

Field Name: callInfoDisplay
Type: ["Object", "Null"]
Cardinality: [0..1]

Dialed Number

Default: True

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].callInfoDisplay.dialedNumber
Type: Boolean
Cardinality: [0..1]
Default: True

Redirected Number

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].callInfoDisplay.redirectedNumber
Type: Boolean
Cardinality: [0..1]

Caller Number

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].callInfoDisplay.callerNumber
Type: Boolean
Cardinality: [0..1]

Caller Name

Default: True

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].callInfoDisplay.callerName
Type: Boolean
Cardinality: [0..1]
Default: True

Dirn

Only uuid attribute is returned in response

Field Name: dirn
Type: ["Object", "Null"]
Cardinality: [1..1]

Pattern *

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].dirn.pattern
Type: String
Cardinality: [1..1]

Route Partition Name *

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].dirn.routePartitionName
Type: ["String", "Null"]
Target: device/cucm/RoutePartition
Target attr: name
Cardinality: [1..1]
Format: uri

Mwl Policy

Default: Use System Policy

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].mwlPolicy
Type: String
Cardinality: [0..1]
Default: Use System Policy
Choices: ["Use System Policy", "Light and Prompt", "Prompt Only", "Light Only", "None"]

Ring Setting Idle Pickup Alert

Applicable only for IP Phones Default: Use System Default

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].ringSettingIdlePickupAlert
Type: ["String", "Null"]
Cardinality: [0..1]
Default: Use System Default
Choices: ["Use System Default", "Disable", "Flash Only", "Ring Once", "Ring", "Beep Only"]

Busy Trigger

Default: 1

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].busyTrigger
Type: Integer
Cardinality: [0..1]
Default: 1

Audible Mwi

Not applicable for gatewayEndpointAnalogAccess and CiscoCatalyst600024PortFXSGateway Default: Default

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].audibleMwi
Type: String
Cardinality: [0..1]
Default: Default
Choices: ["Off", "On", "Default"]

Display

Field Name: mEndpoints.[n].endpoint.port.lines.line.[n].display
Type: String
Cardinality: [0..1]
MaxLength: 50

Caller Id Enable *

Field Name: mEndpoints.[n].endpoint.port.callerIdEnable
Type: Boolean
Cardinality: [1..1]

Unattended Port

Field Name: mEndpoints.[n].endpoint.port.unattendedPort
Type: ["Boolean", "Null"]
Cardinality: [0..1]

Trunk Direction *

Field Name: mEndpoints.[n].endpoint.port.trunkDirection
Type: String
Cardinality: [1..1]
Choices: ["Inbound", "Outbound", "Bothways"]

Trunk Pad Tx

Field Name: mEndpoints.[n].endpoint.port.trunkPadTx
Type: String
Cardinality: [0..1]
Choices: ["Minus32db", "Minus31db", "Minus30db", "Minus29db", "Minus28db", "Minus27db", "Minus26db", "Minus25db", "Minus24db", "Minus23db", "Minus22db", "Minus21db", "Minus20db", "Minus19db", "Minus18db", "Minus17db", "Minus16db", "Minus15db", "Minus14db", "Minus13db", "Minus12db", "Minus11db", "Minus10db", "Minus9db", "Minus8db", "Minus7db", "Minus6db", "Minus5db", "Minus4db", "Minus3db", "Minus2db", "Minus1db", "NoDbPadding", "Plus1db", "Plus2db", "Plus3db", "Plus4db", "Plus5db", "Plus6db", "Plus7db", "Plus8db", "Plus9db", "Plus10db", "Plus11db", "Plus12db", "Plus13db", "Plus14db", "Plus15db", "Plus16db", "Plus17db", "Plus18db", "Plus19db", "Plus20db", "Plus21db", "Plus22db", "Plus23db", "Plus24db", "Plus25db", "Plus26db", "Plus27db", "Plus28db", "Plus29db", "Plus30db", "Plus31db", "Plus32db"]

Trunk Pad Rx

Field Name: mEndpoints.[n].endpoint.port.trunkPadRx
Type: String
Cardinality: [0..1]
Choices: ["Minus32db", "Minus31db", "Minus30db", "Minus29db", "Minus28db", "Minus27db", "Minus26db", "Minus25db", "Minus24db", "Minus23db", "Minus22db", "Minus21db", "Minus20db", "Minus19db", "Minus18db", "Minus17db", "Minus16db", "Minus15db", "Minus14db", "Minus13db", "Minus12db", "Minus11db", "Minus10db", "Minus9db", "Minus8db", "Minus7db", "Minus6db", "Minus5db", "Minus4db", "Minus3db", "Minus2db", "Minus1db", "NoDbPadding", "Plus1db", "Plus2db", "Plus3db", "Plus4db", "Plus5db", "Plus6db", "Plus7db", "Plus8db", "Plus9db", "Plus10db", "Plus11db", "Plus12db", "Plus13db", "Plus14db", "Plus15db", "Plus16db", "Plus17db", "Plus18db", "Plus19db", "Plus20db", "Plus21db", "Plus22db", "Plus23db", "Plus24db", "Plus25db", "Plus26db", "Plus27db", "Plus28db", "Plus29db", "Plus30db", "Plus31db", "Plus32db"]

Pstn Access

Default: True

Field Name: mEndpoints.[n].endpoint.pstnAccess
Type: Boolean
Cardinality: [0..1]
Default: True

Common Device Config Name

Field Name: mEndpoints.[n].endpoint.commonDeviceConfigName
Type: ["String", "Null"]
Cardinality: [0..1]

Network Locale

Field Name: mEndpoints.[n].endpoint.networkLocale
Type: ["String", "Null"]
Cardinality: [0..1]
Choices: ["Argentina", "Australia", "Austria", "Belgium", "Brazil", "Canada", "China", "Colombia", "Cyprus", "Czech Republic", "Denmark", "Egypt", "Finland", "France", "Germany", "Ghana", "Greece", "Hong Kong", "Hungary", "Iceland", "India", "Indonesia", "Ireland", "Israel", "Italy", "Japan", "Jordan", "Kenya", "Korea Republic", "Lebanon", "Luxembourg", "Malaysia", "Mexico", "Nepal", "Netherlands", "New Zealand", "Nigeria", "Norway", "Pakistan", "Panama", "Peru", "Philippines", "Poland", "Portugal", "Russian Federation", "Saudi Arabia", "Singapore", "Slovakia", "Slovenia", "South Africa", "Spain", "Sweden", "Switzerland", "Taiwan", "Thailand", "Turkey", "United Kingdom", "United States", "Venezuela", "Zimbabwe", "Itu", "Chile", "Bulgaria", "Croatia", "Romania", "Serbia and Montenegro", "United Arab Emirates", "Oman", "Kuwait", "Algeria", "Bahrain", "Iraq", "Mauritania", "Republic of Montenegro", "Morocco", "Qatar", "Republic of Serbia", "Sudan", "Tunisia", "Vietnam", "Yemen", "Lithuania", "Latvia", "Estonia", "Ukraine"]

Media Resource List Name

Field Name: mEndpoints.[n].endpoint.mediaResourceListName
Type: ["String", "Null"]
Cardinality: [0..1]

Packet Capture Mode

Default: None

Field Name: mEndpoints.[n].endpoint.packetCaptureMode
Type: String
Cardinality: [0..1]
Default: None
Choices: ["None", "Batch Processing Mode"]

Use Device Pool Cgpn Transform Css

Default: True

Field Name: mEndpoints.[n].endpoint.useDevicePoolCgpnTransformCss
Type: Boolean
Cardinality: [0..1]
Default: True

Product *

Product ID string. read-only except when creating a device.

Field Name: mEndpoints.[n].endpoint.product
Type: String
Cardinality: [1..1]
Choices: ["7914 14-Button Line Expansion Module", "7915 12-Button Line Expansion Module", "7915 24-Button Line Expansion Module", "7916 12-Button Line Expansion Module", "7916 24-Button Line Expansion Module", "AIM-VOICE-30", "Analog Phone", "Annunciator", "BEKEM 36-Button Line Expansion Module", "C881V", "C887VA-V", "CKEM 36-Button Line Expansion Module", "CP-8800-Audio 28-Button Key Expansion Module", "CP-8800-Video 28-Button Key Expansion Module", "CTI Port", "CTI Remote Device", "CTI Route Point", "Carrier-integrated Mobile", "Cisco IAD2400", "Cisco 12 S", "Cisco 12 SP", "Cisco 12 SP+", "Cisco 1751", "Cisco 1760", "Cisco 1861", "Cisco 269X", "Cisco 26XX", "Cisco 2801", "Cisco 2811", "Cisco 2821", "Cisco 2851", "Cisco 2901", "Cisco 2911", "Cisco 2921", "Cisco 2951", "Cisco 30 SP+", "Cisco 30 VIP", "Cisco 362X", "Cisco 364X", "Cisco 366X", "Cisco 3725", "Cisco 3745", "Cisco 3825", "Cisco 3845", "Cisco 3905", "Cisco 3911", "Cisco 3925", "Cisco 3925E", "Cisco 3945", "Cisco 3945E", "Cisco 3951", "Cisco 6901", "Cisco 6911", "Cisco 6921", "Cisco 6941", "Cisco 6945", "Cisco 6961", "Cisco 7811", "Cisco 7821", "Cisco 7832", "Cisco 7841", "Cisco 7861", "Cisco 7902", "Cisco 7905", "Cisco 7906", "Cisco 7910", "Cisco 7911", "Cisco 7912", "Cisco 7920", "Cisco 7921", "Cisco 7925", "Cisco 7926", "Cisco 7931", "Cisco 7935", "Cisco 7936", "Cisco 7937", "Cisco 7940", "Cisco 7941", "Cisco 7941G-GE", "Cisco 7942", "Cisco 7945", "Cisco 7960", "Cisco 7961", "Cisco 7961G-GE", "Cisco 7962", "Cisco 7965", "Cisco 7970", "Cisco 7971", "Cisco 7975", "Cisco 7985", "Cisco 881", "Cisco 8811", "Cisco 8821", "Cisco 8831", "Cisco 8832", "Cisco 8832NR", "Cisco 8841", "Cisco 8845", "Cisco 8851", "Cisco 8851NR", "Cisco 8861", "Cisco 8865", "Cisco 8865NR", "Cisco 888/887/886", "Cisco 8941", "Cisco 8945", "Cisco 8961", "Cisco 9951", "Cisco 9971", "Cisco ATA 186", "Cisco ATA 187", "Cisco ATA 190", "Cisco ATA 191", "Cisco Catalyst 4000 Access Gateway Module", "Cisco Catalyst 4224 Voice Gateway Switch", "Cisco Catalyst 6000 12 port FXO Gateway", "Cisco Catalyst 6000 24 port FXS Gateway", "Cisco Catalyst 6000 E1 VoIP Gateway", "Cisco Catalyst 6000 T1 VoIP Gateway", "Cisco Cius", "Cisco Cius SP", "Cisco Collaboration Mobile Convergence", "Cisco Conference Bridge (WS-SVC-CMM)", "Cisco Conference Bridge Hardware", "Cisco Conference Bridge Software", "Cisco DX650", "Cisco DX70", "Cisco DX80", "Cisco Dual Mode for Android", "Cisco Dual Mode for iPhone", "Cisco E20", "Cisco ENCS 5400 ISRV", "Cisco IOS Conference Bridge", "Cisco IOS Enhanced Conference Bridge", "Cisco IOS Enhanced Media Termination Point", "Cisco IOS Enhanced Software Media Termination Point", "Cisco IOS Guaranteed Audio Video Conference Bridge", "Cisco IOS Heterogeneous Video Conference Bridge", "Cisco IOS Homogeneous Video Conference Bridge", "Cisco IOS Media Termination Point", "Cisco IP Communicator", "Cisco ISR 4321", "Cisco ISR 4331", "Cisco ISR 4351", "Cisco ISR 4431", "Cisco ISR 4451", "Cisco ISR 4461", "Cisco Jabber for Tablet", "Cisco MGCP BRI Port", "Cisco MGCP E1 Port", "Cisco MGCP FXO Port", "Cisco MGCP FXS Port", "Cisco MGCP T1 Port", "Cisco Media Server (WS-SVC-CMM-MS)", "Cisco Media Termination Point (WS-SVC-CMM)", "Cisco Media Termination Point Hardware", "Cisco Media Termination Point Software", "Cisco Meeting Server", "Cisco Spark Remote Device", "Cisco TelePresence", "Cisco TelePresence 1000", "Cisco TelePresence 1100", "Cisco TelePresence 1300-47", "Cisco TelePresence 1300-65", "Cisco TelePresence 200", "Cisco TelePresence 3000", "Cisco TelePresence 3200", "Cisco TelePresence 400", "Cisco TelePresence 500-32", "Cisco TelePresence 500-37", "Cisco TelePresence Codec C40", "Cisco TelePresence Codec C60", "Cisco TelePresence Codec C90", "Cisco TelePresence Conductor", "Cisco TelePresence DX70", "Cisco TelePresence EX60", "Cisco TelePresence EX90", "Cisco TelePresence Exchange System", "Cisco TelePresence IX5000", "Cisco TelePresence MCU", "Cisco TelePresence MX200", "Cisco TelePresence MX200 G2", "Cisco TelePresence MX300", "Cisco TelePresence MX300 G2", "Cisco TelePresence MX700", "Cisco TelePresence MX800", "Cisco TelePresence MX800 Dual", "Cisco TelePresence Profile 42 (C20)", "Cisco TelePresence Profile 42 (C40)", "Cisco TelePresence Profile 42 (C60)", "Cisco TelePresence Profile 52 (C40)", "Cisco TelePresence Profile 52 (C60)", "Cisco TelePresence Profile 52 Dual (C60)", "Cisco TelePresence Profile 65 (C60)", "Cisco TelePresence Profile 65 Dual (C90)", "Cisco TelePresence Quick Set C20", "Cisco TelePresence SX10", "Cisco TelePresence SX20", "Cisco TelePresence SX80", "Cisco TelePresence TX1310-65", "Cisco TelePresence TX9000", "Cisco TelePresence TX9200", "Cisco Unified Client Services Framework", "Cisco Unified Communications for RTX", "Cisco Unified Mobile Communicator", "Cisco Unified Personal Communicator", "Cisco VG200", "Cisco VG248 Gateway", "Cisco VGC Phone", "Cisco VGC Virtual Phone", "Cisco VGD-1T3", "Cisco VXC 6215", "Cisco Video Conference Bridge(IPVC-35xx)", "Cisco Voice Mail Port", "Cisco Webex DX80", "Cisco Webex Room 55", "Cisco Webex Room 55 Dual", "Cisco Webex Room 70 Dual", "Cisco Webex Room 70 Dual G2", "Cisco Webex Room 70 Single", "Cisco Webex Room 70 Single G2", "Cisco Webex Room Kit", "Cisco Webex Room Kit Mini", "Cisco Webex Room Kit Plus", "Communication Media Module", "EMCC Base Phone", "FLEX_SLOT", "Gatekeeper", "Generic Desktop Video Endpoint", "Generic Multiple Screen Room System", "Generic Single Screen Room System", "H.225 Trunk (Gatekeeper Controlled)", "H.323 Client", "H.323 Gateway", "Hunt List", "IAD2400_ANALOG", "IAD2400_DIGITAL", "IMS-integrated Mobile (Basic)", "IP-STE", "ISDN BRI Phone", "Inter-Cluster Trunk (Gatekeeper Controlled)", "Inter-Cluster Trunk (Non-Gatekeeper Controlled)", "Interactive Voice Response", "Load Simulator", "Motorola CN622", "Music On Hold", "NM-1V", "NM-2V", "NM-4VWIC-MBRD", "NM-HD-1V", "NM-HD-2V", "NM-HD-2VE", "NM-HDA", "NM-HDV", "NM-HDV2-0PORT", "NM-HDV2-1PORT", "NM-HDV2-2PORT", "Nokia S60", "PA-MCX", "PA-VXA", "PA-VXB", "PA-VXC", "Pilot", "Remote Destination Profile", "Route List", "SCCP Device", "SCCP gateway virtual phone", "SIP Trunk", "SIP WSM Connection", "SPA8800", "Third-party AS-SIP Endpoint", "Third-party SIP Device (Advanced)", "Third-party SIP Device (Basic)", "Transnova S3", "Universal Device Template", "Unknown", "VG202", "VG204", "VG224", "VG310", "VG320", "VG350", "VG400", "VG450", "VGC Port", "VIC_SLOT", "VKEM 36-Button Line Expansion Module", "VNM-HDA", "VWIC_SLOT", "WS-SVC-CMM-MS", "WS-X6600"]

Calling Party Number Prefix

Field Name: mEndpoints.[n].endpoint.callingPartyNumberPrefix
Type: String
Cardinality: [0..1]
MaxLength: 16

Description

Optional description of the device

Field Name: mEndpoints.[n].endpoint.description
Type: String
Cardinality: [0..1]
MaxLength: 128

Use Device Pool Cgpn Transform Css Unknown

Default: True

Field Name: mEndpoints.[n].endpoint.useDevicePoolCgpnTransformCssUnknown
Type: Boolean
Cardinality: [0..1]
Default: True

Use Device Pool Cdpn Transform Css

Default: True

Field Name: mEndpoints.[n].endpoint.useDevicePoolCdpnTransformCss
Type: Boolean
Cardinality: [0..1]
Default: True

Geo Location Name

Field Name: mEndpoints.[n].endpoint.geoLocationName
Type: ["String", "Null"]
Cardinality: [0..1]

Elin Group

Field Name: mEndpoints.[n].endpoint.elinGroup
Type: ["String", "Null"]
Cardinality: [0..1]

Cdpn Transformation Css Name

Field Name: mEndpoints.[n].endpoint.cdpnTransformationCssName
Type: ["String", "Null"]
Cardinality: [0..1]

Class *

Class ID string. Class information is read-only except when creating a device.

Field Name: mEndpoints.[n].endpoint.class
Type: String
Cardinality: [1..1]
Choices: ["Phone", "Gateway", "Conference Bridge", "Media Termination Point", "Route List", "Voice Mail", "CTI Route Point", "Music On Hold", "Simulation", "Pilot", "GateKeeper", "Add-on modules", "Hidden Phone", "Trunk", "Tone Announcement Player", "Remote Destination Profile", "EMCC Base Phone Template", "EMCC Base Phone", "Remote Destination Profile Template", "Gateway Template", "UDP Template", "Phone Template", "Device Profile", "Invalid", "Interactive Voice Response"]

Hotline Device

This tag is applicable for MGCP FXS ports,which supports PLAR.

Field Name: mEndpoints.[n].endpoint.hotlineDevice
Type: Boolean
Cardinality: [0..1]

Name *

The device name,using only URL-friendly characters

Field Name: mEndpoints.[n].endpoint.name
Type: String
Cardinality: [1..1]
MaxLength: 128

Retry Video Call As Audio

Default: True

Field Name: mEndpoints.[n].endpoint.retryVideoCallAsAudio
Type: Boolean
Cardinality: [0..1]
Default: True

Protocol Side *

Side information is read-only except when creating a device Default: User

Field Name: mEndpoints.[n].endpoint.protocolSide
Type: String
Cardinality: [1..1]
Default: User
Choices: ["Network", "User"]

Trunk Selection Order *

Field Name: mEndpoints.[n].endpoint.trunkSelectionOrder
Type: String
Cardinality: [1..1]
Choices: ["Bottom Up", "Top Down"]

Mlpp Domain Id

This setting only effects devices that support MLPP. Use -1 to set to null

Field Name: mEndpoints.[n].endpoint.mlppDomainId
Type: ["String", "Null"]
Cardinality: [0..1]
MaxLength: 128

Aar Neighborhood Name

Field Name: mEndpoints.[n].endpoint.aarNeighborhoodName
Type: ["String", "Null"]
Cardinality: [0..1]

Location Name *

Field Name: mEndpoints.[n].endpoint.locationName
Type: String
Cardinality: [1..1]

Transmit Utf8

Field Name: mEndpoints.[n].endpoint.transmitUtf8
Type: Boolean
Cardinality: [0..1]

Cgpn Transformation Css Name

Field Name: mEndpoints.[n].endpoint.cgpnTransformationCssName
Type: ["String", "Null"]
Cardinality: [0..1]

Automated Alternate Routing Css Name

Field Name: mEndpoints.[n].endpoint.automatedAlternateRoutingCssName
Type: ["String", "Null"]
Cardinality: [0..1]

Device Pool Name *

Field Name: mEndpoints.[n].endpoint.devicePoolName
Type: ["String", "Null"]
Cardinality: [1..1]

Model

Model ID string. Read Only

Field Name: mEndpoints.[n].endpoint.model
Type: String
Cardinality: [0..1]
Choices: ["Cisco 30 SP+", "Cisco 12 SP+", "Cisco 12 SP", "Cisco 12 S", "Cisco 30 VIP", "Cisco 7910", "Cisco 7960", "Cisco 7940", "Cisco 7935", "Cisco VGC Phone", "Cisco VGC Virtual Phone", "Cisco ATA 186", "EMCC Base Phone", "SCCP Phone", "Analog Access", "Digital Access", "Digital Access+", "Digital Access WS-X6608", "Analog Access WS-X6624", "VGC Gateway", "Conference Bridge", "Conference Bridge WS-X6608", "Cisco IOS Conference Bridge (HDV2)", "Cisco Conference Bridge (WS-SVC-CMM)", "H.323 Phone", "H.323 Gateway", "Music On Hold", "Device Pilot", "CTI Port", "CTI Route Point", "Voice Mail Port", "Cisco IOS Software Media Termination Point (HDV2)", "Cisco Media Server (WS-SVC-CMM-MS)", "Cisco Video Conference Bridge (IPVC-35xx)", "Cisco IOS Heterogeneous Video Conference Bridge", "Cisco IOS Guaranteed Audio Video Conference Bridge", "Cisco IOS Homogeneous Video Conference Bridge", "Route List", "Load Simulator", "Media Termination Point", "Media Termination Point Hardware", "Cisco IOS Media Termination Point (HDV2)", "Cisco Media Termination Point (WS-SVC-CMM)", "Cisco 7941", "Cisco 7971", "MGCP Station", "MGCP Trunk", "GateKeeper", "7914 14-Button Line Expansion Module", "Trunk", "Tone Announcement Player", "SIP Trunk", "SIP Gateway", "WSM Trunk", "Remote Destination Profile", "7915 12-Button Line Expansion Module", "7915 24-Button Line Expansion Module", "7916 12-Button Line Expansion Module", "7916 24-Button Line Expansion Module", "CKEM 36-Button Line Expansion Module", "SPA8800", "Unknown MGCP Gateway", "Unknown", "Cisco 7985", "Cisco 7911", "Cisco 7961G-GE", "Cisco 7941G-GE", "Motorola CN622", "Third-party SIP Device (Basic)", "Cisco 7931", "Cisco Unified Personal Communicator", "Cisco 7921", "Cisco 7906", "Third-party SIP Device (Advanced)", "Cisco TelePresence", "Nokia S60", "Cisco 7962", "Cisco 3951", "Cisco 7937", "Cisco 7942", "Cisco 7945", "Cisco 7965", "Cisco 7975", "Cisco 3911", "Cisco Unified Mobile Communicator", "Cisco TelePresence 1000", "Cisco TelePresence 3000", "Cisco TelePresence 3200", "Cisco TelePresence 500-37", "Cisco 7925", "Cisco 9971", "Cisco 6921", "Cisco 6941", "Cisco 6961", "Cisco Unified Client Services Framework", "Cisco TelePresence 1300-65", "Cisco TelePresence 1100", "Transnova S3", "BlackBerry MVS VoWifi", "Cisco 9951", "Cisco 8961", "Cisco 6901", "Cisco 6911", "Cisco ATA 187", "Cisco TelePresence 200", "Cisco TelePresence 400", "Cisco Dual Mode for iPhone", "Cisco 6945", "Cisco Dual Mode for Android", "Cisco 7926", "Cisco E20", "Generic Single Screen Room System", "Generic Multiple Screen Room System", "Cisco TelePresence EX90", "Cisco 8945", "Cisco 8941", "Generic Desktop Video Endpoint", "Cisco TelePresence 500-32", "Cisco TelePresence 1300-47", "Cisco 3905", "Cisco Cius", "VKEM 36-Button Line Expansion Module", "Cisco TelePresence TX1310-65", "Cisco TelePresence MCU", "Ascom IP-DECT Device", "Cisco TelePresence Exchange System", "Cisco TelePresence EX60", "Cisco TelePresence Codec C90", "Cisco TelePresence Codec C60", "Cisco TelePresence Codec C40", "Cisco TelePresence Quick Set C20", "Cisco TelePresence Profile 42 (C20)", "Cisco TelePresence Profile 42 (C60)", "Cisco TelePresence Profile 52 (C40)", "Cisco TelePresence Profile 52 (C60)", "Cisco TelePresence Profile 52 Dual (C60)", "Cisco TelePresence Profile 65 (C60)", "Cisco TelePresence Profile 65 Dual (C90)", "Cisco TelePresence MX200", "Cisco TelePresence TX9000", "Cisco TelePresence TX9200", "Cisco 7821", "Cisco 7841", "Cisco 7861", "Cisco TelePresence SX20", "Cisco TelePresence MX300", "IMS-integrated Mobile (Basic)", "Third-party AS-SIP Endpoint", "Cisco Cius SP", "Cisco TelePresence Profile 42 (C40)", "Cisco VXC 6215", "CTI Remote Device", "Usage Profile", "Carrier-integrated Mobile", "Universal Device Template", "Cisco DX650", "Cisco Unified Communications for RTX", "Cisco Jabber for Tablet", "Cisco 8831", "Cisco ATA 190", "Cisco TelePresence SX10", "Cisco 8841", "Cisco 8851", "Cisco 8861", "Cisco TelePresence SX80", "Cisco TelePresence MX200 G2", "Cisco TelePresence MX300 G2", "Cisco 7905", "Cisco 7920", "Cisco 7970", "Cisco 7912", "Cisco 7902", "Cisco IP Communicator", "Cisco 7961", "Cisco 7936", "Analog Phone", "ISDN BRI Phone", "SCCP gateway virtual phone", "IP-STE", "Cisco TelePresence Conductor", "Cisco DX80", "Cisco DX70", "BEKEM 36-Button Line Expansion Module", "Cisco TelePresence MX700", "Cisco TelePresence MX800", "Cisco TelePresence IX5000", "Cisco 7811", "Cisco 8821", "Cisco 8811", "Interactive Voice Response", "Cisco 8845", "Cisco 8865", "Cisco TelePresence MX800 Dual", "Cisco 8851NR", "Cisco Spark Remote Device", "Cisco Webex DX80", "Cisco TelePresence DX70", "Cisco 7832", "Cisco 8865NR", "Cisco Meeting Server", "Cisco Webex Room Kit", "Cisco Webex Room 55", "Cisco Webex Room Kit Plus", "CP-8800-Video 28-Button Key Expansion Module", "CP-8800-Audio 28-Button Key Expansion Module", "Cisco 8832", "Cisco Webex Room 70 Single", "Cisco 8832NR", "Cisco ATA 191", "Cisco Collaboration Mobile Convergence", "Cisco Webex Room 70 Dual", "Cisco Webex Room 55 Dual", "Cisco Webex Room 70 Single G2", "Cisco Webex Room 70 Dual G2", "Cisco Webex Room Kit Mini"]

Ime E164Transformation Name

Field Name: mEndpoints.[n].endpoint.imeE164TransformationName
Type: ["String", "Null"]
Cardinality: [0..1]

Ime E164Directory Number

Field Name: mEndpoints.[n].endpoint.imeE164DirectoryNumber
Type: String
Cardinality: [0..1]
MaxLength: 16

Unit *

Field Name: mEndpoints.[n].unit
Type: Integer
Cardinality: [1..1]

Domain Name

Field Name: mEndpoints.[n].domainName
Type: String
Cardinality: [0..1]

Model: relation/HcsAnalogGatewayREL

Analog Gateways

Model Details