.. _set_up_sip_local_gateway:
.. rst-class:: chapter-with-expand
Set up SIP Local Gateway
------------------------
**Before You Begin**
* You must configure an IOS Device at the customer hierarchy node.
* You must configure an NDL containing the Cisco Unified CM for the customer.
* You must configure a SIP Trunk at the customer hierarchy node.
A SIP Local Gateway is a logical gateway running on a physical IOS device.
**Procedure**
1. Log in as provider, reseller, or customer administrator.
#. Set the hierarchy path to the customer for which you are setting up
the SIP Local Gateway.
#. Choose **Device Management > IOS > SIP Local Gateways**.
#. Click **Add**.
#. On the **SIP Local Gateways** screen, complete at minimum, the mandatory
:ref:`sip_local_gateways_fields`.
#. Click **Save**.
* The SIP Local Gateway appears in the **SIP Local Gateway** list view.
* The HcsAddSipLocalGwEVT event is generated. If enabled, the IOS
Command Builder generates the default IOS commands associated with the
event.
* The HcsAddSipLocalGwDialPeerEVT event is generated. If enabled, the
IOS Command Builder generates the default IOS commands associated with
the event for each dial peer.
.. _sip_local_gateways_fields:
SIP Local Gateways Fields
.........................
.. tabularcolumns:: |p{3.5cm}|p{12cm}|
+------------------------+-------------------------------------------+
| Field | Description |
+========================+===========================================+
| Name \* | Enter a name for the SIP Local Gateway. |
| | This field is mandatory. |
+------------------------+-------------------------------------------+
| Description | Enter a description for the SIP Local |
| | Gateway. |
+------------------------+-------------------------------------------+
| | Choose the IOS Device on which the SIP |
| | Local Gateway is located. This field is |
| | mandatory. |
| | Note: |
| IOS Device \* | |
| | An IOS Device can have only one SIP Local |
| | Gateway. |
| | |
| | Once selected, the IOS Device cannot be |
| | changed. |
+------------------------+-------------------------------------------+
| | Choose the country where the SIP Local |
| | Gateway is. This field is mandatory. |
| Country \* | |
| | The country selected must be the same |
| | country as the Site to which the SIP |
| | local gateway will be associated. |
+------------------------+-------------------------------------------+
| | Choose the CUCM Publisher. All CUCM |
| | Publishers that are in the customer's NDL |
| | are displayed. This field is mandatory. |
| CUCM Publisher \* | |
| | The chosen CUCM Publisher must be the |
| | same as the CUCM Publisher in the NDL for |
| | the Site to which the SIP local gateway |
| | will be associated. |
+------------------------+-------------------------------------------+
| | Choose the SIP Trunk from the ones |
| | available on the CUCM Publisher. This |
| | field is mandatory. |
| | Note: |
| | |
| SIP Trunk \* | Only SIP Trunks configured at the |
| | customer hierarchy are available. If the |
| | customer uses a shared CUCM, then SIP |
| | Trunks must be manually configured at the |
| | customer level in VOSS-4-UC to be |
| | selectable here. |
+------------------------+-------------------------------------------+
| | Gateway Address. This field is read-only |
| | and is derived from the selected SIP |
| | Trunk. |
| Gateway Address | |
| | Note: |
| | |
| | If a SIP Trunk has multiple destination |
| | addresses, only the first one is used. |
+------------------------+-------------------------------------------+
| Gateway Port | Gateway Port. This field is read-only and |
| | is derived from the selected SIP Trunk. |
+------------------------+-------------------------------------------+
| | Indicates whether call processing is |
| Run on Every Node | distributed across all CUCM subscriber |
| | nodes. This field is read-only and is |
| | derived from the selected SIP Trunk. |
+------------------------+-------------------------------------------+
| | If the **Run on Every Node** is cleared |
| | then the Call Manager Group members are |
| | displayed in priority order. |
| Dial Peer Info | |
| | If the **Run on Every Node** check box is |
| | selected, then all CUCM nodes in the |
| | cluster are displayed, but without |
| | priority. |
+------------------------+-------------------------------------------+
| | Select this check box to have Command |
| Enable Command | Builder generate commands when SIP Local |
| Builder \* | Gateway is added, deleted, or modified. |
| | Default = Selected. |
+------------------------+-------------------------------------------+
| Override Voice | Select this check box to override Voice |
| Translation Limit | Translation Limit if E164 associations |
| ** Warning may | exceed 80. Default = Cleared. |
| invalidate Command | |
| Builder Configuration**| |
+------------------------+-------------------------------------------+